pedro.nogueira at sicnet
May 20, 2008, 11:14 AM
Post #1 of 1
(132 views)
Permalink
|
|
help about configuring a bri port to conect to a dialog board fax server
|
|
Hello,
i´m trying to configure a bri port to work with a dialogic board fax server, and i never get answer from the fax server. Anyone has instaled already a solution like that ? can anyone tell me the proceding to do it ? My media gateway is working in MGCP, the bri port is configured only with the folowing:
interface BRI0/1/0
no ip address
isdn switch-type basic-net3
isdn protocol-emulate network
isdn layer1-emulate network
isdn incoming-voice voice
isdn bind-l3 ccm-manager service mgcp
isdn send-alerting
isdn static-tei 0
isdn skipsend-idverify
the voice port config is:
voice-port 0/1/0
compand-type a-law
cptone PT
and the dial-peer configuration is:
dial-peer voice 10 pots
description Liga Fax Server
destination-pattern 610T
direct-inward-dial
port 0/1/0
forward-digits all
and at last the mgcp is configured as follows:
mgcp
mgcp call-agent 10.101.128.253 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp sgcp disconnect notify
mgcp sgcp restart notify
mgcp package-capability rtp-package
mgcp package-capability sst-package
mgcp package-capability pre-package
mgcp default-package line-package
no mgcp package-capability res-package
no mgcp package-capability fxr-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp validate domain-name
mgcp rtp payload-type g726r16 static
!
mgcp profile default
any ideas / sugestions about my configuration ?
Thanks,
Pedro
|
