VLoschiavo at data-corporation
Mar 3, 2008, 6:18 AM
Post #2 of 2
(150 views)
Permalink
|
try this.
dial-peer voice 90 voip
description DialPeer to Meetingplace Express
destination-pattern 8050
session protocol sipv2
session target ipv4:192.168.238.33<http://192.168.238.33/>
dtmf-relay rtp-nte
codec g711ulaw
no vad
____________________________________________________________
Vincent Loschiavo
Cisco Practice Director
Datacorp
18503 Pines Blvd
Suite 213
Pembroke Pines, FL, 33029
"Cisco Advanced Unified Communications Partner"
Cell Phone: 786-282-1164
Office Phone: 954-671-5669
Office Main: 305-594-6933
____________________________________________________________
________________________________
From: cisco-voip-bounces[at]puck.nether.net [mailto:cisco-voip-bounces[at]puck.nether.net] On Behalf Of James Grace
Sent: Friday, February 29, 2008 4:00 PM
To: cisco-voip[at]puck.nether.net
Subject: [cisco-voip] dtmf not working with cme and mpx2
we are trying to configure a mpx w/ cme. we dial the pilot number and connect to mpx. And then mpx will not take the prompts. Something is wrong with dtmf. I configured dial peer
dial-peer voice 8050 voip
description MeetingplaceX
destination-pattern 8050
session protocol sipv2
session target ipv4:192.168.238.33<http://192.168.238.33>
dtmf-relay sip-notify
codec g711ulaw
no vad
Is there something im missing in CME
--
James Grace
CCVP CCNP CCNA MCSE MCDBA
System Engineer / Consultant
Email: grace.jd[at]gmail.com<mailto:grace.jd[at]gmail.com>
MSN IM: grace.jd[at]gmail.com<mailto:grace.jd[at]gmail.com>
|
