lemon at lemon
Feb 28, 2008, 7:49 AM
Views: 1148
Permalink
|
Hi,
Have CCM 6.0 running with 6 PRI's split over two AS5350XM's. When
dialing out we sometimes get that it just rings and rings and rings.
If you phone the same number from a mobile phone you get an immediate
response. Below some debug output:
Feb 28 15:39:34.824: ISDN Se3/1:15 Q931: TX -> SETUP pd = 8 callref = 0x1C05
Sending Complete
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98392
Exclusive, Channel 18
Progress Ind i = 0x8183 - Origination address is non-ISDN
Calling Party Number i = 0x0181, '8021'
Plan:ISDN, Type:Unknown
Called Party Number i = 0x80, '1850602602'
Plan:Unknown, Type:Unknown
Feb 28 15:39:34.972: ISDN Se3/1:15 Q931: RX <- CALL_PROC pd = 8
callref = 0x9C05
Channel ID i = 0xA98392
Exclusive, Channel 18
Feb 28 15:39:35.068: ISDN Se3/1:15 Q931: RX <- ALERTING pd = 8
callref = 0x9C05
Progress Ind i = 0x8482 - Destination address is non-ISDN
Progress Ind i = 0x8488 - In-band info or appropriate now available
Thnx
_______________________________________________
cisco-voip mailing list
cisco-voip[at]puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
|
Outbound calls just Ring
