Mailing List Archive: Cisco: VOIP

CCM Upgrade changes

Index | Next | Previous | View Threaded

SCASPER at mtb

Feb 6, 2008, 4:56 AM

Post #1 of 8 (561 views)
Permalink

CCM Upgrade changes

After a CCM Upgrade I think the following are set to default on all devices:

Phone Volume settings on speaker and handset
Ring Tone selection
Display Contrast settings

Are Call Foward settings retained? Is anything else reset?

Thanks!
Steve

************************************
This email may contain privileged and/or confidential information that is intended solely for the use of the addressee. If you are not the intended recipient or entity, you are strictly prohibited from disclosing, copying, distributing or using any of the information contained in the transmission. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act. You may not directly or indirectly reuse or disclose such information for any purpose other than to provide the services for which you are receiving the information.
There are risks associated with the use of electronic transmission. The sender of this information does not control the method of transmittal or service providers and assumes no duty or obligation for the security, receipt, or third party interception of this transmission.
************************************

_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

matt at saskin

Feb 6, 2008, 5:54 AM

Post #2 of 8 (543 views)
Permalink

Re: CCM Upgrade changes [In reply to]

I don't recall any of those settings changing when we did our 4.1(3) to
6.0.1 upgrade.

-matt

STEVEN CASPER wrote:
> After a CCM Upgrade I think the following are set to default on all devices:
>
> Phone Volume settings on speaker and handset
> Ring Tone selection
> Display Contrast settings
>
> Are Call Foward settings retained? Is anything else reset?
>
> Thanks!
> Steve
>
> ************************************
> This email may contain privileged and/or confidential information that is intended solely for the use of the addressee. If you are not the intended recipient or entity, you are strictly prohibited from disclosing, copying, distributing or using any of the information contained in the transmission. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act. You may not directly or indirectly reuse or disclose such information for any purpose other than to provide the services for which you are receiving the information.
> There are risks associated with the use of electronic transmission. The sender of this information does not control the method of transmittal or service providers and assumes no duty or obligation for the security, receipt, or third party interception of this transmission.
> ************************************
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

svoll.voip at gmail

Feb 6, 2008, 12:59 PM

Post #3 of 8 (540 views)
Permalink

Re: CCM Upgrade changes [In reply to]

I could see issues if you are using custom ring tones.

Scott

On Feb 6, 2008 5:54 AM, Matthew Saskin <matt [at] saskin> wrote:

> I don't recall any of those settings changing when we did our 4.1(3) to
> 6.0.1 upgrade.
>
> -matt
>
> STEVEN CASPER wrote:
> > After a CCM Upgrade I think the following are set to default on all
> devices:
> >
> > Phone Volume settings on speaker and handset
> > Ring Tone selection
> > Display Contrast settings
> >
> > Are Call Foward settings retained? Is anything else reset?
> >
> > Thanks!
> > Steve
> >
> > ************************************
> > This email may contain privileged and/or confidential information that
> is intended solely for the use of the addressee. If you are not the
> intended recipient or entity, you are strictly prohibited from disclosing,
> copying, distributing or using any of the information contained in the
> transmission. If you received this communication in error, please contact
> the sender immediately and destroy the material in its entirety, whether
> electronic or hard copy. This communication may contain nonpublic personal
> information about consumers subject to the restrictions of the
> Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act. You may not directly or
> indirectly reuse or disclose such information for any purpose other than to
> provide the services for which you are receiving the information.
> > There are risks associated with the use of electronic transmission. The
> sender of this information does not control the method of transmittal or
> service providers and assumes no duty or obligation for the security,
> receipt, or third party interception of this transmission.
> > ************************************
> >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip [at] puck
> > https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-voip
>

matt at saskin

Feb 7, 2008, 5:50 AM

Post #4 of 8 (534 views)
Permalink

Re: CCM Upgrade changes [In reply to]

Why is that? As long as you re-upload the ringtones to the server once
it is up and running 5x/6x, the phones will be able to grab them.
Background images/ringtones/etc. preferences are stored locally on the
phones (and I believe they persist across firmware upgrades, I can't
recall ever having to reset the ringtone on my phones)

-matt

Scott Voll wrote:
> I could see issues if you are using custom ring tones.
>
> Scott
>
>
>
> On Feb 6, 2008 5:54 AM, Matthew Saskin <matt [at] saskin
> <mailto:matt [at] saskin>> wrote:
>
> I don't recall any of those settings changing when we did our 4.1(3) to
> 6.0.1 upgrade.
>
> -matt
>
> STEVEN CASPER wrote:
> > After a CCM Upgrade I think the following are set to default on
> all devices:
> >
> > Phone Volume settings on speaker and handset
> > Ring Tone selection
> > Display Contrast settings
> >
> > Are Call Foward settings retained? Is anything else reset?
> >
> > Thanks!
> > Steve
> >
> > ************************************
> > This email may contain privileged and/or confidential information
> that is intended solely for the use of the addressee. If you are
> not the intended recipient or entity, you are strictly prohibited
> from disclosing, copying, distributing or using any of the
> information contained in the transmission. If you received this
> communication in error, please contact the sender immediately and
> destroy the material in its entirety, whether electronic or hard
> copy. This communication may contain nonpublic personal information
> about consumers subject to the restrictions of the
> Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act. You may not
> directly or indirectly reuse or disclose such information for any
> purpose other than to provide the services for which you are
> receiving the information.
> > There are risks associated with the use of electronic
> transmission. The sender of this information does not control the
> method of transmittal or service providers and assumes no duty or
> obligation for the security, receipt, or third party interception of
> this transmission.
> > ************************************
> >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip [at] puck <mailto:cisco-voip [at] puck>
> > https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck <mailto:cisco-voip [at] puck>
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>

_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

ealeatherman at gmail

Feb 7, 2008, 6:17 AM

Post #5 of 8 (531 views)
Permalink

Re: CCM Upgrade changes [In reply to]

My understanding is that in CCM 5.x call forward all settings are retained,
unless the user makes a change to them between the time the patch is loaded
on the servers and the servers are rebooted since the change would not be in
the new database.

I think that may have changed in CM6 with the different way it handles db
updates.

On Feb 6, 2008 7:56 AM, STEVEN CASPER <SCASPER [at] mtb> wrote:

> After a CCM Upgrade I think the following are set to default on all
> devices:
>
> Phone Volume settings on speaker and handset
> Ring Tone selection
> Display Contrast settings
>
> Are Call Foward settings retained? Is anything else reset?
>
> Thanks!
> Steve
>
> cisco-voip mailing list
> cisco-voip [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-voip
>

--
Ed Leatherman
Senior Voice Engineer
West Virginia University
Telecommunications and Network Operations

billt at aos5

Feb 7, 2008, 6:38 AM

Post #6 of 8 (531 views)
Permalink

Re: CCM Upgrade changes [In reply to]

If I'm not mistaken, if you've never defined the Call Forward Calling Search
Space on a DN, call forwarding will not work after the upgrade. In CUCM 4.x
and prior the None CSS was unrestricted; however in CUCM 5.x and above
that's changed and None CSS is fully restricted. I've come across more than
one upgrade where the Call Forward CSS was left at None.

_____

From: cisco-voip-bounces [at] puck
[mailto:cisco-voip-bounces [at] puck] On Behalf Of Ed Leatherman
Sent: Thursday, February 07, 2008 8:17 AM
To: STEVEN CASPER
Cc: cisco-voip [at] puck
Subject: Re: [cisco-voip] CCM Upgrade changes

My understanding is that in CCM 5.x call forward all settings are retained,
unless the user makes a change to them between the time the patch is loaded
on the servers and the servers are rebooted since the change would not be in
the new database.

I think that may have changed in CM6 with the different way it handles db
updates.

On Feb 6, 2008 7:56 AM, STEVEN CASPER <SCASPER [at] mtb> wrote:

After a CCM Upgrade I think the following are set to default on all devices:

Phone Volume settings on speaker and handset
Ring Tone selection
Display Contrast settings

Are Call Foward settings retained? Is anything else reset?

Thanks!
Steve

cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

--
Ed Leatherman
Senior Voice Engineer
West Virginia University
Telecommunications and Network Operations

Attachments:

smime.p7s (3.00 KB)

lelio at uoguelph

Feb 7, 2008, 6:43 AM

Post #7 of 8 (530 views)
Permalink

Re: CCM Upgrade changes [In reply to]

...and of course, that is fully documented somewhere. ;)

Lelio
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo." WJR

----- Original Message -----
From: Bill Talley
To: Ed Leatherman ; STEVEN CASPER
Cc: cisco-voip [at] puck
Sent: Thursday, February 07, 2008 9:38 AM
Subject: Re: [cisco-voip] CCM Upgrade changes

If I'm not mistaken, if you've never defined the Call Forward Calling Search Space on a DN, call forwarding will not work after the upgrade. In CUCM 4.x and prior the None CSS was unrestricted; however in CUCM 5.x and above that's changed and None CSS is fully restricted. I've come across more than one upgrade where the Call Forward CSS was left at None.

------------------------------------------------------------------------------
From: cisco-voip-bounces [at] puck [mailto:cisco-voip-bounces [at] puck] On Behalf Of Ed Leatherman
Sent: Thursday, February 07, 2008 8:17 AM
To: STEVEN CASPER
Cc: cisco-voip [at] puck
Subject: Re: [cisco-voip] CCM Upgrade changes

My understanding is that in CCM 5.x call forward all settings are retained, unless the user makes a change to them between the time the patch is loaded on the servers and the servers are rebooted since the change would not be in the new database.

I think that may have changed in CM6 with the different way it handles db updates.

On Feb 6, 2008 7:56 AM, STEVEN CASPER <SCASPER [at] mtb> wrote:

After a CCM Upgrade I think the following are set to default on all devices:

Phone Volume settings on speaker and handset
Ring Tone selection
Display Contrast settings

Are Call Foward settings retained? Is anything else reset?

Thanks!
Steve

cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

--
Ed Leatherman
Senior Voice Engineer
West Virginia University
Telecommunications and Network Operations

------------------------------------------------------------------------------

_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

jason.aarons at us

Feb 7, 2008, 7:59 AM

Post #8 of 8 (531 views)
Permalink

Re: CCM Upgrade changes [In reply to]

I know in 3.x with 7940/7960 any type of reset and you lost the ring
tone and volume. It irked end-users. I don't recall seeing this in
5.x/6.x with 7941/7961.

-----Original Message-----
From: cisco-voip-bounces [at] puck
[mailto:cisco-voip-bounces [at] puck] On Behalf Of Matthew Saskin
Sent: Thursday, February 07, 2008 8:51 AM
To: Scott Voll
Cc: cisco-voip [at] puck; STEVEN CASPER
Subject: Re: [cisco-voip] CCM Upgrade changes

Why is that? As long as you re-upload the ringtones to the server once
it is up and running 5x/6x, the phones will be able to grab them.
Background images/ringtones/etc. preferences are stored locally on the
phones (and I believe they persist across firmware upgrades, I can't
recall ever having to reset the ringtone on my phones)

-matt

Scott Voll wrote:
> I could see issues if you are using custom ring tones.
>
> Scott
>
>
>
> On Feb 6, 2008 5:54 AM, Matthew Saskin <matt [at] saskin
> <mailto:matt [at] saskin>> wrote:
>
> I don't recall any of those settings changing when we did our
4.1(3) to
> 6.0.1 upgrade.
>
> -matt
>
> STEVEN CASPER wrote:
> > After a CCM Upgrade I think the following are set to default on
> all devices:
> >
> > Phone Volume settings on speaker and handset
> > Ring Tone selection
> > Display Contrast settings
> >
> > Are Call Foward settings retained? Is anything else reset?
> >
> > Thanks!
> > Steve
> >
> > ************************************
> > This email may contain privileged and/or confidential
information
> that is intended solely for the use of the addressee. If you are
> not the intended recipient or entity, you are strictly prohibited
> from disclosing, copying, distributing or using any of the
> information contained in the transmission. If you received this
> communication in error, please contact the sender immediately and
> destroy the material in its entirety, whether electronic or hard
> copy. This communication may contain nonpublic personal
information
> about consumers subject to the restrictions of the
> Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act. You may not
> directly or indirectly reuse or disclose such information for any
> purpose other than to provide the services for which you are
> receiving the information.
> > There are risks associated with the use of electronic
> transmission. The sender of this information does not control the
> method of transmittal or service providers and assumes no duty or
> obligation for the security, receipt, or third party interception
of
> this transmission.
> > ************************************
> >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip [at] puck <mailto:cisco-voip [at] puck>
> > https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck <mailto:cisco-voip [at] puck>
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>

_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

Index | Next | Previous | View Threaded

Interested in having your list archived? Contact Gossamer Threads