Mailing List Archive: Cisco: VOIP

auto dial

Index | Next | Previous | View Threaded

svoll.voip at gmail

Aug 30, 2007, 2:42 PM

Post #1 of 4 (1733 views)
Permalink

auto dial

How do I set an ATA port (elevator phone) to dial a number on pick up?

Sorry for the simple question. I just don't have time to research.

TIA

Scott

Nesen.Kisten at za

Aug 30, 2007, 2:45 PM

Post #2 of 4 (1710 views)
Permalink

Re: auto dial [In reply to]

Hi,

Create a blank translation pattern and set your number to dial within the translation patttern.

Regards

________________________________

From: cisco-voip-bounces [at] puck on behalf of Scott Voll
Sent: Thu 2007/08/30 11:42 PM
To: cisco voip list
Subject: [cisco-voip] auto dial

How do I set an ATA port (elevator phone) to dial a number on pick up?

Sorry for the simple question. I just don't have time to research.

TIA

Scott

This email and all contents are subject to the following disclaimer:

"http://www.dimensiondata.com/emaildisclaimer.htm"

rsingleton at morsco

Aug 30, 2007, 2:51 PM

Post #3 of 4 (1712 views)
Permalink

Re: auto dial [In reply to]

On Thu, 2007-08-30 at 23:45 +0200, Nesen Kisten (ZA) wrote:
> Hi,
>
> Create a blank translation pattern and set your number to dial within
> the translation patttern.

I would expand that to say create a separate calling search space for
the phone, a separate partition for the translation pattern and make
sure that no other calling search space includes the partition used for
the translation pattern, or you'll suddenly have all phones dialing that
number upon picking up and nobody will be able to call you about
it... :)

I'm not saying that's exactly what happened to me or anything...

Robert

_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

wsisk at cisco

Aug 30, 2007, 7:15 PM

Post #4 of 4 (1706 views)
Permalink

Re: auto dial [In reply to]

http://www.cisco.com/en/US/customer/products/sw/voicesw/ps556/products_configuration_example09186a0080232b9f.shtml"]http://www.cisco.com/en/US/customer/products/sw/voicesw/ps556/products_configuration_example09186a0080232b9f.shtml

Scott Voll wrote:

How do I set an ATA port (elevator phone) to dial a number on pick up? Sorry for the simple question. I just don't have time to research. TIA Scott
_______________________________________________ cisco-voip mailing list cisco-voip [at] puck https://puck.nether.net/mailman/listinfo/cisco-voip"]https://puck.nether.net/mailman/listinfo/cisco-voip

Index | Next | Previous | View Threaded

Interested in having your list archived? Contact Gossamer Threads