Mailing List Archive: Cisco: VOIP

Open a door by using a Cisco ip phone

Index | Next | Previous | View Threaded

cisco at ip-project

Feb 26, 2007, 3:47 PM

Post #1 of 9 (1897 views)
Permalink

Open a door by using a Cisco ip phone

Hey all,
we would like to press a button on a 79xx phone to initiate a door opener. I've searched, but only found one commercial application (ANDtek) with no technical details. How do I connect the door opener? Do I need a PC with a serial port? Or is it some kind of analog phone with that functionality connected through an ATA? And what piece of software do I need?
And second, connecting any kind of webcam or surveillance cam to the network and watching the output on a 797x would be fine. Again, what cameras do I need, and what piece of software?

Any links?

Thanks,
Hans-Peter
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

rratliff at cisco

Feb 26, 2007, 4:17 PM

Post #2 of 9 (1864 views)
Permalink

Re: Open a door by using a Cisco ip phone [In reply to]

If I were going to do it i'd have a speed dial to a DN that rings an
analog line on an FXS port. You set up the door activation to be
triggered by ring voltage on the line and you're good to go.

For video you can set up a PC with a VTA camera, IPC, and auto-answer
enabled on the line.

-Ryan

On Feb 26, 2007, at 6:47 PM, cisco [at] ip-project wrote:

Hey all,
we would like to press a button on a 79xx phone to initiate a door
opener. I've searched, but only found one commercial application
(ANDtek) with no technical details. How do I connect the door opener?
Do I need a PC with a serial port? Or is it some kind of analog phone
with that functionality connected through an ATA? And what piece of
software do I need?
And second, connecting any kind of webcam or surveillance cam to the
network and watching the output on a 797x would be fine. Again, what
cameras do I need, and what piece of software?

Any links?

Thanks,
Hans-Peter
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

Scott.Voll at wesd

Feb 26, 2007, 4:17 PM

Post #3 of 9 (1897 views)
Permalink

Re: Open a door by using a Cisco ip phone [In reply to]

I can only talk about the door.

If your using a mag-lock system call your vendor. Then it's just a
matter of hooking it up to your ATA.

We have this kind of system and it's just DTMF from the answering phone
to the door lock system to have it open.

Scott

-----Original Message-----
From: cisco-voip-bounces [at] puck
[mailto:cisco-voip-bounces [at] puck] On Behalf Of
cisco [at] ip-project
Sent: Monday, February 26, 2007 3:47 PM
To: cisco-voip [at] puck
Subject: [cisco-voip] Open a door by using a Cisco ip phone

Hey all,
we would like to press a button on a 79xx phone to initiate a door
opener. I've searched, but only found one commercial application
(ANDtek) with no technical details. How do I connect the door opener? Do
I need a PC with a serial port? Or is it some kind of analog phone with
that functionality connected through an ATA? And what piece of software
do I need?
And second, connecting any kind of webcam or surveillance cam to the
network and watching the output on a 797x would be fine. Again, what
cameras do I need, and what piece of software?

Any links?

Thanks,
Hans-Peter
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

rratliff at cisco

Feb 26, 2007, 4:18 PM

Post #4 of 9 (1870 views)
Permalink

Re: Open a door by using a Cisco ip phone [In reply to]

That's way simpler than my suggestion :)

-Ryan

On Feb 26, 2007, at 7:17 PM, Voll, Scott wrote:

I can only talk about the door.

If your using a mag-lock system call your vendor. Then it's just a
matter of hooking it up to your ATA.

We have this kind of system and it's just DTMF from the answering phone
to the door lock system to have it open.

Scott

-----Original Message-----
From: cisco-voip-bounces [at] puck
[mailto:cisco-voip-bounces [at] puck] On Behalf Of
cisco [at] ip-project
Sent: Monday, February 26, 2007 3:47 PM
To: cisco-voip [at] puck
Subject: [cisco-voip] Open a door by using a Cisco ip phone

Hey all,
we would like to press a button on a 79xx phone to initiate a door
opener. I've searched, but only found one commercial application
(ANDtek) with no technical details. How do I connect the door opener? Do
I need a PC with a serial port? Or is it some kind of analog phone with
that functionality connected through an ATA? And what piece of software
do I need?
And second, connecting any kind of webcam or surveillance cam to the
network and watching the output on a 797x would be fine. Again, what
cameras do I need, and what piece of software?

Any links?

Thanks,
Hans-Peter
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

jason.aarons at us

Feb 26, 2007, 4:34 PM

Post #5 of 9 (1869 views)
Permalink

Re: Open a door by using a Cisco ip phone [In reply to]

Valcom makes single and four door control units, use a FXO interface. If
you use FXS/ATA you may have disconnect-supervision issues.

Valcom pre-sales is really good, call them.

http://www.valcom.com/doorsecurity.htm

-----Original Message-----
From: cisco-voip-bounces [at] puck
[mailto:cisco-voip-bounces [at] puck] On Behalf Of Voll, Scott
Sent: Monday, February 26, 2007 7:18 PM
To: cisco [at] ip-project; cisco-voip [at] puck
Subject: Re: [cisco-voip] Open a door by using a Cisco ip phone

I can only talk about the door.

If your using a mag-lock system call your vendor. Then it's just a
matter of hooking it up to your ATA.

We have this kind of system and it's just DTMF from the answering phone
to the door lock system to have it open.

Scott

-----Original Message-----
From: cisco-voip-bounces [at] puck
[mailto:cisco-voip-bounces [at] puck] On Behalf Of
cisco [at] ip-project
Sent: Monday, February 26, 2007 3:47 PM
To: cisco-voip [at] puck
Subject: [cisco-voip] Open a door by using a Cisco ip phone

Hey all,
we would like to press a button on a 79xx phone to initiate a door
opener. I've searched, but only found one commercial application
(ANDtek) with no technical details. How do I connect the door opener? Do
I need a PC with a serial port? Or is it some kind of analog phone with
that functionality connected through an ATA? And what piece of software
do I need?
And second, connecting any kind of webcam or surveillance cam to the
network and watching the output on a 797x would be fine. Again, what
cameras do I need, and what piece of software?

Any links?

Thanks,
Hans-Peter
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip
-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.

_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

lelio at uoguelph

Feb 26, 2007, 4:43 PM

Post #6 of 9 (1949 views)
Permalink

Re: Open a door by using a Cisco ip phone [In reply to]

Ditto on Valcom presales. Very Good.

Also look at Bogen and Viking for analog devices.

Looking for a custom analog device? This company here has helped us out in the past with custom emergency phone poles for our campus. http://www.minelec.com/

----- Original Message -----
From: Jason Aarons (US)
To: cisco-voip [at] puck
Sent: Monday, February 26, 2007 7:34 PM
Subject: Re: [cisco-voip] Open a door by using a Cisco ip phone

Valcom makes single and four door control units, use a FXO interface. If
you use FXS/ATA you may have disconnect-supervision issues.

Valcom pre-sales is really good, call them.

http://www.valcom.com/doorsecurity.htm

-----Original Message-----
From: cisco-voip-bounces [at] puck
[mailto:cisco-voip-bounces [at] puck] On Behalf Of Voll, Scott
Sent: Monday, February 26, 2007 7:18 PM
To: cisco [at] ip-project; cisco-voip [at] puck
Subject: Re: [cisco-voip] Open a door by using a Cisco ip phone

I can only talk about the door.

If your using a mag-lock system call your vendor. Then it's just a
matter of hooking it up to your ATA.

We have this kind of system and it's just DTMF from the answering phone
to the door lock system to have it open.

Scott

-----Original Message-----
From: cisco-voip-bounces [at] puck
[mailto:cisco-voip-bounces [at] puck] On Behalf Of
cisco [at] ip-project
Sent: Monday, February 26, 2007 3:47 PM
To: cisco-voip [at] puck
Subject: [cisco-voip] Open a door by using a Cisco ip phone

Hey all,
we would like to press a button on a 79xx phone to initiate a door
opener. I've searched, but only found one commercial application
(ANDtek) with no technical details. How do I connect the door opener? Do
I need a PC with a serial port? Or is it some kind of analog phone with
that functionality connected through an ATA? And what piece of software
do I need?
And second, connecting any kind of webcam or surveillance cam to the
network and watching the output on a 797x would be fine. Again, what
cameras do I need, and what piece of software?

Any links?

Thanks,
Hans-Peter
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip
-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.

_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

jonvoip at gmail

Feb 27, 2007, 7:48 AM

Post #7 of 9 (1868 views)
Permalink

Re: Open a door by using a Cisco ip phone [In reply to]

I just had to deal with one of these...

It was a door intercom, connected to an FXO, plarred to a shared line... The
phone rings and the people hit ** to unlock the door for a few seconds, and
*# to unlock until they hit *# again...)

Pretty straight forward... no idea who made it...

Jonathan

On 2/26/07, cisco [at] ip-project <cisco [at] ip-project> wrote:
>
> Hey all,
> we would like to press a button on a 79xx phone to initiate a door opener.
> I've searched, but only found one commercial application (ANDtek) with no
> technical details. How do I connect the door opener? Do I need a PC with a
> serial port? Or is it some kind of analog phone with that functionality
> connected through an ATA? And what piece of software do I need?
> And second, connecting any kind of webcam or surveillance cam to the
> network and watching the output on a 797x would be fine. Again, what cameras
> do I need, and what piece of software?
>
> Any links?
>
> Thanks,
> Hans-Peter
> _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-voip
>

ray at oneunified

Feb 27, 2007, 8:38 AM

Post #8 of 9 (1854 views)
Permalink

Re: Open a door by using a Cisco ip phone [In reply to]

<http://www.vic> http://www.vikingelectronics.com may have some combination
of devices suitable for what you need.

By connecting their stuff to an ATA, remote door control may be obtainable.

_____

From: cisco-voip-bounces [at] puck
[mailto:cisco-voip-bounces [at] puck] On Behalf Of Jonathan Charles
Sent: Tuesday, February 27, 2007 11:49
To: cisco [at] ip-project
Cc: cisco-voip [at] puck
Subject: Re: [cisco-voip] Open a door by using a Cisco ip phone

I just had to deal with one of these...

It was a door intercom, connected to an FXO, plarred to a shared line... The
phone rings and the people hit ** to unlock the door for a few seconds, and
*# to unlock until they hit *# again...)

Pretty straight forward... no idea who made it...

Jonathan

On 2/26/07, cisco [at] ip-project <cisco [at] ip-project> wrote:

Hey all,
we would like to press a button on a 79xx phone to initiate a door opener.
I've searched, but only found one commercial application (ANDtek) with no
technical details. How do I connect the door opener? Do I need a PC with a
serial port? Or is it some kind of analog phone with that functionality
connected through an ATA? And what piece of software do I need?
And second, connecting any kind of webcam or surveillance cam to the network
and watching the output on a 797x would be fine. Again, what cameras do I
need, and what piece of software?

Any links?

Thanks,
Hans-Peter
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

--
Scanned for viruses & dangerous content at One Unified
<http://www.oneunified.net> and is believed to be clean.

--
Scanned for viruses and dangerous content at
http://www.oneunified.net and is believed to be clean.

patrick.diener at gmail

Mar 6, 2007, 8:11 AM

Post #9 of 9 (1850 views)
Permalink

Re: Open a door by using a Cisco ip phone [In reply to]

It's also possible to do it the "converged way" over IP:
http://www.barix.com/building_automation.html

Patrick

On 2/27/07, Ray Burkholder <ray [at] oneunified> wrote:
>
>
> MailScanner has detected a possible fraud attempt from
> "www.vikingelectronics.com" claiming to be http://www.vikingelectronics.com
> may have some combination of devices suitable for what you need.
>
> By connecting their stuff to an ATA, remote door control may be obtainable.
>
>
> ________________________________
> From: cisco-voip-bounces [at] puck
> [mailto:cisco-voip-bounces [at] puck] On Behalf Of
> Jonathan Charles
> Sent: Tuesday, February 27, 2007 11:49
> To: cisco [at] ip-project
> Cc: cisco-voip [at] puck
> Subject: Re: [cisco-voip] Open a door by using a Cisco ip phone
>
>
> I just had to deal with one of these...
>
> It was a door intercom, connected to an FXO, plarred to a shared line... The
> phone rings and the people hit ** to unlock the door for a few seconds, and
> *# to unlock until they hit *# again...)
>
> Pretty straight forward... no idea who made it...
>
>
>
> Jonathan
>
>
> On 2/26/07, cisco [at] ip-project <cisco [at] ip-project> wrote:
> > Hey all,
> > we would like to press a button on a 79xx phone to initiate a door opener.
> I've searched, but only found one commercial application (ANDtek) with no
> technical details. How do I connect the door opener? Do I need a PC with a
> serial port? Or is it some kind of analog phone with that functionality
> connected through an ATA? And what piece of software do I need?
> > And second, connecting any kind of webcam or surveillance cam to the
> network and watching the output on a 797x would be fine. Again, what cameras
> do I need, and what piece of software?
> >
> > Any links?
> >
> > Thanks,
> > Hans-Peter
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip [at] puck
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
>
> --
> Scanned for viruses & dangerous content at One Unified and is believed to be
> clean.
> --
> Scanned for viruses & dangerous content at One Unified and is believed to be
> clean.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

Index | Next | Previous | View Threaded

Interested in having your list archived? Contact Gossamer Threads