Login | Register For Free | Help
Search for: (Advanced)

Mailing List Archive: Cisco: VOIP

sccp ip precedence

 

 

Cisco voip RSS feed   Index | Next | Previous | View Threaded


jrybak at annese

Jun 17, 2006, 1:10 PM

Post #1 of 6 (986 views)
Permalink
sccp ip precedence

I have a question regarding the command: sccp ip precedence value





The documentation states "value = IP precedence value. Range is from 1
(highest) to 7 (lowest)." The following example sets IP precedence to the
highest possible value:

Router# sccp ip precedence 1



This is obviously a typo, no?



The default value makes it appear as though it would refer to media streams.




This docs suggests it is the actual signaling.



http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_command_refe
rence_chapter09186a008045733b.html#wp1245396



This doc suggests voice streams.



http://www.cisco.com/univercd/cc/td/doc/product/voice/c_access/vg_200/config
/dsp.htm#xtocid273628



I have always assumed it was the voice stream because of the default value
of 5.



Any clarification would be appreciated.



Thanks,



jake


tednugent69 at yahoo

Jun 17, 2006, 8:48 PM

Post #2 of 6 (926 views)
Permalink
Re: sccp ip precedence [In reply to]

Yes, thatís obviously a typo, if this is your first
day with Cisco docs then you might want to get used to
it. If maybe you can give an idea of what youíre
trying to accomplish then maybe we can try and give
you some guidance. By default at least in the Cisco
world you can expect voice control to be tagged as
IPPrec of 3 (AF31 or CS3) and media (rtp) as IP Prec 5
(EF). Unless you have a reason to mess with these
values then why bother? Again without knowing what
youíre trying to accomplish then it makes it difficult
to give you any sort of advice. BTW, IP Prec is old
school, the rest of the world uses DSCP?


--- Jake Rybak <jrybak [at] annese> wrote:

> I have a question regarding the command: sccp ip
> precedence value
>
>
>
>
>
> The documentation states "value = IP precedence
> value. Range is from 1
> (highest) to 7 (lowest)." The following example sets
> IP precedence to the
> highest possible value:
>
> Router# sccp ip precedence 1
>
>
>
> This is obviously a typo, no?
>
>
>
> The default value makes it appear as though it would
> refer to media streams.
>
>
>
>
> This docs suggests it is the actual signaling.
>
>
>
>
http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_command_refe
> rence_chapter09186a008045733b.html#wp1245396
>
>
>
> This doc suggests voice streams.
>
>
>
>
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_access/vg_200/config
> /dsp.htm#xtocid273628
>
>
>
> I have always assumed it was the voice stream
> because of the default value
> of 5.
>
>
>
> Any clarification would be appreciated.
>
>
>
> Thanks,
>
>
>
> jake
>
>
>
> > _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-voip
>


__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip


jrybak at annese

Jun 18, 2006, 2:00 AM

Post #3 of 6 (943 views)
Permalink
Re: sccp ip precedence [In reply to]

Thanks. I just wanted to be 100% positive that it is changing the voice
stream and not signaling. I guess I could have just captured the packets but
I wasn't in place that it was possible.

As you know, MGCP and H323 you can choose signaling or media.

So being registered to a CM 3.3, the CM service parameter would override
this anyway? Not that you would want to.




-----Original Message-----
From: cisco-voip-bounces [at] puck
[mailto:cisco-voip-bounces [at] puck] On Behalf Of Ted Nugent
Sent: Saturday, June 17, 2006 23:49
To: cisco-voip [at] puck
Subject: Re: [cisco-voip] sccp ip precedence

Yes, that's obviously a typo, if this is your first day with Cisco docs then
you might want to get used to it. If maybe you can give an idea of what
you're trying to accomplish then maybe we can try and give you some
guidance. By default at least in the Cisco world you can expect voice
control to be tagged as IPPrec of 3 (AF31 or CS3) and media (rtp) as IP Prec
5 (EF). Unless you have a reason to mess with these values then why bother?
Again without knowing what you're trying to accomplish then it makes it
difficult to give you any sort of advice. BTW, IP Prec is old school, the
rest of the world uses DSCP?


--- Jake Rybak <jrybak [at] annese> wrote:

> I have a question regarding the command: sccp ip precedence value
>
>
>
>
>
> The documentation states "value = IP precedence value. Range is from 1
> (highest) to 7 (lowest)." The following example sets IP precedence to
> the highest possible value:
>
> Router# sccp ip precedence 1
>
>
>
> This is obviously a typo, no?
>
>
>
> The default value makes it appear as though it would refer to media
> streams.
>
>
>
>
> This docs suggests it is the actual signaling.
>
>
>
>
http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_command_refe
> rence_chapter09186a008045733b.html#wp1245396
>
>
>
> This doc suggests voice streams.
>
>
>
>
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_access/vg_200/config
> /dsp.htm#xtocid273628
>
>
>
> I have always assumed it was the voice stream because of the default
> value of 5.
>
>
>
> Any clarification would be appreciated.
>
>
>
> Thanks,
>
>
>
> jake
>
>
>
> > _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-voip
>


__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com _______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip


tednugent69 at yahoo

Jun 18, 2006, 8:12 AM

Post #4 of 6 (927 views)
Permalink
Re: sccp ip precedence [In reply to]

Since SCCP is a signaling protocol I would guess that
this is certainly for signaling and not media.




--- Jake Rybak <jrybak [at] annese> wrote:

> Thanks. I just wanted to be 100% positive that it is
> changing the voice
> stream and not signaling. I guess I could have just
> captured the packets but
> I wasn't in place that it was possible.
>
> As you know, MGCP and H323 you can choose signaling
> or media.
>
> So being registered to a CM 3.3, the CM service
> parameter would override
> this anyway? Not that you would want to.
>
>
>
>
> -----Original Message-----
> From: cisco-voip-bounces [at] puck
> [mailto:cisco-voip-bounces [at] puck] On
> Behalf Of Ted Nugent
> Sent: Saturday, June 17, 2006 23:49
> To: cisco-voip [at] puck
> Subject: Re: [cisco-voip] sccp ip precedence
>
> Yes, that's obviously a typo, if this is your first
> day with Cisco docs then
> you might want to get used to it. If maybe you can
> give an idea of what
> you're trying to accomplish then maybe we can try
> and give you some
> guidance. By default at least in the Cisco world you
> can expect voice
> control to be tagged as IPPrec of 3 (AF31 or CS3)
> and media (rtp) as IP Prec
> 5 (EF). Unless you have a reason to mess with these
> values then why bother?
> Again without knowing what you're trying to
> accomplish then it makes it
> difficult to give you any sort of advice. BTW, IP
> Prec is old school, the
> rest of the world uses DSCP?
>
>
> --- Jake Rybak <jrybak [at] annese> wrote:
>
> > I have a question regarding the command: sccp ip
> precedence value
> >
> >
> >
> >
> >
> > The documentation states "value = IP precedence
> value. Range is from 1
> > (highest) to 7 (lowest)." The following example
> sets IP precedence to
> > the highest possible value:
> >
> > Router# sccp ip precedence 1
> >
> >
> >
> > This is obviously a typo, no?
> >
> >
> >
> > The default value makes it appear as though it
> would refer to media
> > streams.
> >
> >
> >
> >
> > This docs suggests it is the actual signaling.
> >
> >
> >
> >
>
http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_command_refe
> > rence_chapter09186a008045733b.html#wp1245396
> >
> >
> >
> > This doc suggests voice streams.
> >
> >
> >
> >
>
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_access/vg_200/config
> > /dsp.htm#xtocid273628
> >
> >
> >
> > I have always assumed it was the voice stream
> because of the default
> > value of 5.
> >
> >
> >
> > Any clarification would be appreciated.
> >
> >
> >
> > Thanks,
> >
> >
> >
> > jake
> >
> >
> >
> > > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip [at] puck
> >
> https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam
> protection around
> http://mail.yahoo.com
> _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-voip
>


__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip


jrybak at annese

Jun 18, 2006, 10:02 AM

Post #5 of 6 (931 views)
Permalink
Re: sccp ip precedence [In reply to]

With a default value of 5? So what you saying is that this command should
always be changed from the default?

I do not have a dspfarm in my lab so the router will not initiate any sccp
traffic to callmanager. I cannot get a capture.

My goal is to find out if this default value should be changed so the
packets will map to cs3.

-----Original Message-----
From: Ted Nugent [mailto:tednugent69 [at] yahoo]
Sent: Sunday, June 18, 2006 11:13
To: Jake Rybak; cisco-voip [at] puck
Subject: Re: [cisco-voip] sccp ip precedence

Since SCCP is a signaling protocol I would guess that this is certainly for
signaling and not media.




--- Jake Rybak <jrybak [at] annese> wrote:

> Thanks. I just wanted to be 100% positive that it is changing the
> voice stream and not signaling. I guess I could have just captured the
> packets but I wasn't in place that it was possible.
>
> As you know, MGCP and H323 you can choose signaling or media.
>
> So being registered to a CM 3.3, the CM service parameter would
> override this anyway? Not that you would want to.
>
>
>
>
> -----Original Message-----
> From: cisco-voip-bounces [at] puck
> [mailto:cisco-voip-bounces [at] puck] On Behalf Of Ted Nugent
> Sent: Saturday, June 17, 2006 23:49
> To: cisco-voip [at] puck
> Subject: Re: [cisco-voip] sccp ip precedence
>
> Yes, that's obviously a typo, if this is your first day with Cisco
> docs then you might want to get used to it. If maybe you can give an
> idea of what you're trying to accomplish then maybe we can try and
> give you some guidance. By default at least in the Cisco world you can
> expect voice control to be tagged as IPPrec of 3 (AF31 or CS3) and
> media (rtp) as IP Prec
> 5 (EF). Unless you have a reason to mess with these values then why
> bother?
> Again without knowing what you're trying to accomplish then it makes
> it difficult to give you any sort of advice. BTW, IP Prec is old
> school, the rest of the world uses DSCP?
>
>
> --- Jake Rybak <jrybak [at] annese> wrote:
>
> > I have a question regarding the command: sccp ip
> precedence value
> >
> >
> >
> >
> >
> > The documentation states "value = IP precedence
> value. Range is from 1
> > (highest) to 7 (lowest)." The following example
> sets IP precedence to
> > the highest possible value:
> >
> > Router# sccp ip precedence 1
> >
> >
> >
> > This is obviously a typo, no?
> >
> >
> >
> > The default value makes it appear as though it
> would refer to media
> > streams.
> >
> >
> >
> >
> > This docs suggests it is the actual signaling.
> >
> >
> >
> >
>
http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_command_refe
> > rence_chapter09186a008045733b.html#wp1245396
> >
> >
> >
> > This doc suggests voice streams.
> >
> >
> >
> >
>
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_access/vg_200/config
> > /dsp.htm#xtocid273628
> >
> >
> >
> > I have always assumed it was the voice stream
> because of the default
> > value of 5.
> >
> >
> >
> > Any clarification would be appreciated.
> >
> >
> >
> > Thanks,
> >
> >
> >
> > jake
> >
> >
> >
> > > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip [at] puck
> >
> https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-voip
>


__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip


tednugent69 at yahoo

Jun 18, 2006, 10:45 AM

Post #6 of 6 (928 views)
Permalink
Re: sccp ip precedence [In reply to]

I can probably lab it this week sometime and get back
to you. You're right though the default being 5 does
not make a lot of sense.


--- Jake Rybak <jrybak [at] annese> wrote:

> With a default value of 5? So what you saying is
> that this command should
> always be changed from the default?
>
> I do not have a dspfarm in my lab so the router will
> not initiate any sccp
> traffic to callmanager. I cannot get a capture.
>
> My goal is to find out if this default value should
> be changed so the
> packets will map to cs3.
>
> -----Original Message-----
> From: Ted Nugent [mailto:tednugent69 [at] yahoo]
> Sent: Sunday, June 18, 2006 11:13
> To: Jake Rybak; cisco-voip [at] puck
> Subject: Re: [cisco-voip] sccp ip precedence
>
> Since SCCP is a signaling protocol I would guess
> that this is certainly for
> signaling and not media.
>
>
>
>
> --- Jake Rybak <jrybak [at] annese> wrote:
>
> > Thanks. I just wanted to be 100% positive that it
> is changing the
> > voice stream and not signaling. I guess I could
> have just captured the
> > packets but I wasn't in place that it was
> possible.
> >
> > As you know, MGCP and H323 you can choose
> signaling or media.
> >
> > So being registered to a CM 3.3, the CM service
> parameter would
> > override this anyway? Not that you would want to.
> >
> >
> >
> >
> > -----Original Message-----
> > From: cisco-voip-bounces [at] puck
> > [mailto:cisco-voip-bounces [at] puck] On
> Behalf Of Ted Nugent
> > Sent: Saturday, June 17, 2006 23:49
> > To: cisco-voip [at] puck
> > Subject: Re: [cisco-voip] sccp ip precedence
> >
> > Yes, that's obviously a typo, if this is your
> first day with Cisco
> > docs then you might want to get used to it. If
> maybe you can give an
> > idea of what you're trying to accomplish then
> maybe we can try and
> > give you some guidance. By default at least in the
> Cisco world you can
> > expect voice control to be tagged as IPPrec of 3
> (AF31 or CS3) and
> > media (rtp) as IP Prec
> > 5 (EF). Unless you have a reason to mess with
> these values then why
> > bother?
> > Again without knowing what you're trying to
> accomplish then it makes
> > it difficult to give you any sort of advice. BTW,
> IP Prec is old
> > school, the rest of the world uses DSCP?
> >
> >
> > --- Jake Rybak <jrybak [at] annese> wrote:
> >
> > > I have a question regarding the command: sccp ip
> > precedence value
> > >
> > >
> > >
> > >
> > >
> > > The documentation states "value = IP precedence
> > value. Range is from 1
> > > (highest) to 7 (lowest)." The following example
> > sets IP precedence to
> > > the highest possible value:
> > >
> > > Router# sccp ip precedence 1
> > >
> > >
> > >
> > > This is obviously a typo, no?
> > >
> > >
> > >
> > > The default value makes it appear as though it
> > would refer to media
> > > streams.
> > >
> > >
> > >
> > >
> > > This docs suggests it is the actual signaling.
> > >
> > >
> > >
> > >
> >
>
http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_command_refe
> > > rence_chapter09186a008045733b.html#wp1245396
> > >
> > >
> > >
> > > This doc suggests voice streams.
> > >
> > >
> > >
> > >
> >
>
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_access/vg_200/config
> > > /dsp.htm#xtocid273628
> > >
> > >
> > >
> > > I have always assumed it was the voice stream
> > because of the default
> > > value of 5.
> > >
> > >
> > >
> > > Any clarification would be appreciated.
> > >
> > >
> > >
> > > Thanks,
> > >
> > >
> > >
> > > jake
> > >
> > >
> > >
> > > >
> _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip [at] puck
> > >
> >
> https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam? Yahoo! Mail has the best spam
> protection around
> > http://mail.yahoo.com
> _______________________________________________
> > cisco-voip mailing list
> > cisco-voip [at] puck
> >
> https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip [at] puck
> >
> https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam
> protection around
> http://mail.yahoo.com
>
>


__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

Cisco voip RSS feed   Index | Next | Previous | View Threaded
 
 


Interested in having your list archived? Contact Gossamer Threads
 
  Web Applications & Managed Hosting Powered by Gossamer Threads Inc.