CORTIZ at broward
Mar 27, 2006, 8:58 AM
Post #8 of 8
(659 views)
Permalink
|
Thanks! Hope this helps some others as well....
-----Original Message-----
From: Ryan Ratliff [mailto:rratliff [at] cisco]
Sent: Monday, March 27, 2006 11:56 AM
To: Ortiz, Carlos
Cc: cisco-voip [at] puck
Subject: Re: [cisco-voip] CCM version
The latest dev pack (45.4) on CCO should take care of this for you.
It should make the load for the 41 and 61s TERM41.7-0-3-0S.
-Ryan
On Mar 27, 2006, at 11:54 AM, Ortiz, Carlos wrote:
4.02a (sr2b). I guess it's about that time for an upgrade. Let me add
that to the list of IP Telephony projects that keeps mounting.... :)
-----Original Message-----
From: Ryan Ratliff [mailto:rratliff [at] cisco]
Sent: Monday, March 27, 2006 11:53 AM
To: Ortiz, Carlos
Cc: cisco-voip [at] puck
Subject: Re: [cisco-voip] CCM version
You just need to get to a version of CM that includes them in device
defaults. What version of CM are you running now?
-Ryan
On Mar 27, 2006, at 11:50 AM, Ortiz, Carlos wrote:
Well that makes a lot more sense. That was one of the other concerns
(Not seeing it as an option to add manually). If you have a lot of
these out there (79X1) and come across a bug, what's the quickest way to
upgrade them all if you can't change the default load in CCM? I am
about to place an order for more phones and would like to start ordering
the 79X1 series going forward.
Carlos
-----Original Message-----
From: Ryan Ratliff [mailto:rratliff [at] cisco]
Sent: Monday, March 27, 2006 11:42 AM
To: Ortiz, Carlos
Cc: cisco-voip [at] puck
Subject: Re: [cisco-voip] CCM version
The compatibility matrix only lists the default loads for IP phones
per CM version. 4.2(1) and 5.0(1) are the only ones that out of the
box have default loads for the 7941 and 61 phones. They work just
fine on older versions of CM however.
Personally I have a 7941 registered with CM 3.3(5)SR1 server but only
because it auto registered. I suspect a later SR or device pack will
be necessary for me to add one manually.
-Ryan
On Mar 27, 2006, at 11:10 AM, Ortiz, Carlos wrote:
I just checked the Call Manager compatibility Matrix, but not sure if
I am reading this right. Do the new 7961 and 7941 phones require CCM
4.2.1 to be used?
Carlos
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip
|
