rratliff at cisco
Mar 15, 2004, 11:45 AM
Post #3 of 3
(133 views)
Permalink
|
|
Re: Asterisk and a CCM... I got the logs....
[In reply to]
|
|
Turns out the number coming to CM had 9 prefixed and the CM was sending the
call out to the PSTN, where it got routed back in. Getting rid of the 9
fixed the issue.
-Ryan
----- Original Message -----
From: "Ryan Ratliff" <rratliff [at] cisco>
To: "Kyle Stone" <kstone [at] teledvance>; <cisco-voip [at] puck>
Sent: Monday, March 15, 2004 1:13 PM
Subject: Re: [cisco-voip] Asterisk and a CCM... I got the logs....
> Feel free to unicast it to me with info on calling party dn, called party,
> etc.
>
> -Ryan
> ----- Original Message -----
> From: "Kyle Stone" <kstone [at] teledvance>
> To: "Ryan Ratliff" <rratliff [at] cisco>; <cisco-voip [at] puck>
> Sent: Monday, March 15, 2004 1:00 PM
> Subject: RE: [cisco-voip] Asterisk and a CCM... I got the logs....
>
>
> > I created a trace... I'm not sure what I'm looking for here thou.. It's
> > got a few calls made by other devices too, so I didn't want to paste it
> > here..
> >
> >
> >
> > Kyle
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > -----Original Message-----
> > From: Ryan Ratliff [mailto:rratliff [at] cisco]
> > Sent: Monday, March 15, 2004 10:42 AM
> > To: Kyle Stone; cisco-voip [at] puck
> > Subject: Re: [cisco-voip] Asterisk and a CCM...
> >
> > Obviously my ignorance of Asterisk is getting in the way here.
> >
> > In the CallManager web page go to Application->Serviceability. Then go
> > to
> > Trace->Configuration. Choose the server that the phone is registered
> > to.
> > Select the Cisco CallManager service.
> > Now hit the "Set Default" button, and then change the debug trace level
> > to
> > detailed (drop-down box). Hit Update.
> >
> > Now your CCM traces are being logged in full detail to c:\program
> > files\cisco\trace\ccm.
> >
> > -Ryan
> > ----- Original Message -----
> > From: "Kyle Stone" <kstone [at] teledvance>
> > To: "Ryan Ratliff" <rratliff [at] cisco>; <cisco-voip [at] puck>
> > Sent: Monday, March 15, 2004 10:41 AM
> > Subject: RE: [cisco-voip] Asterisk and a CCM...
> >
> >
> > > Umm... I'm pretty green in CCM still. I don't really know where the
> > > trace utility is or how to use it. It's a 3.2 CCM, btw.. I don't have
> > > any thing terminating in Asterisk as of yet.. I'm trying to route all
> > > the call out of it that don't exist locally to the CCM. I can call
> > from
> > > an h323 client to an h323 client in Asterisk.. I know that works.. and
> > I
> > > can get the sccp 7960 on the CCM to ring.. but like I said.. 1.5 rings
> > > and it's dead.. Or if I answer it.. it goes fast busy. How do I
> > check
> > > the capabilities of what codecs are allowed to call this phone?
> > Maybie
> > > it's a codec mismatch on the Asterisk side of the call.
> > >
> > >
> > >
> > >
> > > Kyle
> > >
> > >
> > > -----Original Message-----
> > > From: Ryan Ratliff [mailto:rratliff [at] cisco]
> > > Sent: Monday, March 15, 2004 10:31 AM
> > > To: Kyle Stone; cisco-voip [at] puck
> > > Subject: Re: [cisco-voip] Asterisk and a CCM...
> > >
> > > You should be able to see the H225 communication between the gateway
> > and
> > > CM
> > > in the CallManager traces. Make sure they are set to detailed. If
> > you
> > > are
> > > running an older version of CM (ie 3.1) you will also want to set
> > > SdlTraceTypeFlag to 0x8000EB15. This trace should also tell you the
> > > disconnect cause for the call.
> > >
> > > What type of trunk do you have going to the Asterisk? If it's a PRI
> > > what
> > > does a 'debug isdn q931' show?
> > >
> > > -Ryan
> > > ----- Original Message -----
> > > From: "Kyle Stone" <kstone [at] teledvance>
> > > To: <cisco-voip [at] puck>
> > > Sent: Monday, March 15, 2004 10:19 AM
> > > Subject: [cisco-voip] Asterisk and a CCM...
> > >
> > >
> > > > I'm trying to bridge Asterisk PBX and CCM. I setup a h323 gateway
> > on
> > > > CCM and pointed it to the Asterisk box. I build chan_oh323 for
> > > > asterisk.. installed it, and pointed it to route to the CCM.
> > > > I call a CCM extension from Asterisk and the phone rings 1.5 times
> > and
> > > > CCM ends the call. I can tell this from the Asterisk debug logs.
> > > >
> > > >
> > > > Anyone have any suggestions as how to debug this on the CCM side?
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > cisco-voip mailing list
> > > > cisco-voip [at] puck
> > > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
> >
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-voip
|
