Mailing List Archive: Cisco: VOIP

Routing outbound calls conditionally based on the call source

Index | Next | Previous | View Threaded

isamar at gmail

Aug 19, 2012, 9:52 AM

Post #1 of 4 (298 views)
Permalink

Routing outbound calls conditionally based on the call source

Hi Folks,

We have here the following scenario on CUCM.

All users are dialing out through one group which has a GSM and TDM
gateway included, and both
gateways are connected using SIP.

If GSM connection fails, calls go through E1 gateway. It's working OK now.

Problem: Some users don't want to go through GSM gateway since it
doesn't have CallerID set.

So, we need to set these users to go directly to the E1 gateway.

Which are the options to the set that on CUCM conditionally based on
the call's source ?

--
Isamar Maia
Cel. VIVO SSA: (55) 71-9146-8575
Cel. TIM SSA: (55) 71-9185-5264
Fixo: (55) 71-4062-8688
$BF|K\(B: +81-(0)3-4550-1212
Skype ID: isamar.maia
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

roger.wiklund at gmail

Aug 19, 2012, 11:03 AM

Post #2 of 4 (271 views)
Permalink

Re: Routing outbound calls conditionally based on the call source [In reply to]

You can use 'Route Next Hop By Calling Party on a translation pattern
to at least block calls based on ANI.
Perhaps you can play around with that.

https://supportforums.cisco.com/docs/DOC-18367

/Roger

On Sun, Aug 19, 2012 at 6:52 PM, Isamar Maia <isamar [at] gmail> wrote:
> Hi Folks,
>
> We have here the following scenario on CUCM.
>
> All users are dialing out through one group which has a GSM and TDM
> gateway included, and both
> gateways are connected using SIP.
>
> If GSM connection fails, calls go through E1 gateway. It's working OK now.
>
> Problem: Some users don't want to go through GSM gateway since it
> doesn't have CallerID set.
>
> So, we need to set these users to go directly to the E1 gateway.
>
> Which are the options to the set that on CUCM conditionally based on
> the call's source ?
>
>
> --
> Isamar Maia
> Cel. VIVO SSA: (55) 71-9146-8575
> Cel. TIM SSA: (55) 71-9185-5264
> Fixo: (55) 71-4062-8688
> 日本: +81-(0)3-4550-1212
> Skype ID: isamar.maia
> _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

tednugent73 at gmail

Aug 19, 2012, 12:52 PM

Post #3 of 4 (270 views)
Permalink

Re: Routing outbound calls conditionally based on the call source [In reply to]

Not exactly what you;re asking but probably much easier and will work...
create a new CSS that points to another set of RP->RL with the E1 ordered
first. Assign that CSS to those phones.

On Sun, Aug 19, 2012 at 12:52 PM, Isamar Maia <isamar [at] gmail> wrote:

> Hi Folks,
>
> We have here the following scenario on CUCM.
>
> All users are dialing out through one group which has a GSM and TDM
> gateway included, and both
> gateways are connected using SIP.
>
> If GSM connection fails, calls go through E1 gateway. It's working OK now.
>
> Problem: Some users don't want to go through GSM gateway since it
> doesn't have CallerID set.
>
> So, we need to set these users to go directly to the E1 gateway.
>
> Which are the options to the set that on CUCM conditionally based on
> the call's source ?
>
>
> --
> Isamar Maia
> Cel. VIVO SSA: (55) 71-9146-8575
> Cel. TIM SSA: (55) 71-9185-5264
> Fixo: (55) 71-4062-8688
> 日本: +81-(0)3-4550-1212
> Skype ID: isamar.maia
> _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-voip
>

lelio at uoguelph

Aug 19, 2012, 12:56 PM

Post #4 of 4 (273 views)
Permalink

Re: Routing outbound calls conditionally based on the call source [In reply to]

This is the way I would accomplish this task as well. It's not ideal, but fairly easy (not necessarily quick though) to implement.

Sent from my iPhone...

"There's no place like 127.0.0.1"

On Aug 19, 2012, at 3:52 PM, Ted Nugent <tednugent73 [at] gmail> wrote:

> Not exactly what you;re asking but probably much easier and will work... create a new CSS that points to another set of RP->RL with the E1 ordered first. Assign that CSS to those phones.
>
> On Sun, Aug 19, 2012 at 12:52 PM, Isamar Maia <isamar [at] gmail> wrote:
> Hi Folks,
>
> We have here the following scenario on CUCM.
>
> All users are dialing out through one group which has a GSM and TDM
> gateway included, and both
> gateways are connected using SIP.
>
> If GSM connection fails, calls go through E1 gateway. It's working OK now.
>
> Problem: Some users don't want to go through GSM gateway since it
> doesn't have CallerID set.
>
> So, we need to set these users to go directly to the E1 gateway.
>
> Which are the options to the set that on CUCM conditionally based on
> the call's source ?
>
>
> --
> Isamar Maia
> Cel. VIVO SSA: (55) 71-9146-8575
> Cel. TIM SSA: (55) 71-9185-5264
> Fixo: (55) 71-4062-8688
> 日本: +81-(0)3-4550-1212
> Skype ID: isamar.maia
> _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-voip

Index | Next | Previous | View Threaded

Interested in having your list archived? Contact Gossamer Threads