jbuchanan at presidio
Jul 2, 2012, 10:28 AM
Post #2 of 2
When you upgraded the router, did you also upgrade the DRAM to 512MB? If not, this will cause that symptom. Also, what is the exact release of code you are running? One more thing-could you send a router config? If it is an H323 gateway, you may be hitting the ip address authentication list.
Re: Cisco CM 4.2 with Cisco 2811 running IOS ver c2800nm-spservicesk9-mz.151-4.M4 connection to Nortel PBX 1000E
[In reply to]
James Buchanan| UC Technology Manager | Presidio South | Presidio Networked Solutions
12 Cadillac Dr Ste 130 Brentwood, TN 37027 | jbuchanan [at] presidio<mailto:jbuchanan [at] presidio>
D: 615-866-5729 | F:615-866-5781 www.presidio.com<http://www.presidio.com/>
From: cisco-voip-bounces [at] puck [mailto:cisco-voip-bounces [at] puck] On Behalf Of Harold G Penley
Sent: Monday, July 02, 2012 10:26 AM
To: 'cisco-voip [at] puck'
Subject: [cisco-voip] Cisco CM 4.2 with Cisco 2811 running IOS ver c2800nm-spservicesk9-mz.151-4.M4 connection to Nortel PBX 1000E
We have 12 Cisco 7912 Wireless IP phones with CM 4.2(3)sr3a. Our router is a Cisco 2811 running ver c2800nm-spservicesk9-mz.124-9.T7. Calling to and from Nortel PBX phones are working fine. We are moving to CM 8.xxx and need to update the IOS on the C2811 to ver 15.1. When we upgrade to the new IOS with our current CM ver 4.2, we are getting calls from the Nortel PBX to the Cisco 7921, but we are not getting Cisco 7921 to Nortel PBX phones. The Nortel phones will only flash for a split second and the C7921 will go to busy after two or three rings.
McKesson Provider Technologies/Managed Services
@ Cookeville Regional Medical Center
1 Medical Center Boulevard
Cookeville, TN 38501
hpenley [at] crmchealth<mailto:hpenley [at] crmchealth>
[cid:image001.png [at] 01CD584E]
Integrity Customer Focused Accountability Respect Excellence
Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.
This message w/attachments (message) is intended solely for the use of the intended recipient and may contain information that is privileged, confidential or proprietary. If you are not an intended recipient, please notify the sender, and then please delete and destroy all copies and attachments. Please be advised that any review or dissemination of, or the taking of any action in reliance on, the information contained in or attached to this message is prohibited.