mikenorton at pwsd76
Apr 25, 2012, 10:38 AM
ATA186 doesn't do T.38. ATA187 can.
From: cisco-voip-bounces [at] puck [mailto:cisco-voip-bounces [at] puck] On Behalf Of Thierry De Vriendt
Sent: April-25-12 5:43 AM
To: cisco-voip [at] puck
Subject: [cisco-voip] T.38 Fax on CUCM 8.6
I have some questions about CUCM 8.6 and fax transmission.
We are using Cisco ATA 186 to connect the fax.
The Call Manager is connected with a SIP trunk towards our provider. The "Media Termination Point Required" is checked inside the sip trunk configuration. This is checked because the provider's gateway has no connectivity with the ATA or phones, only with the CCM.
So, two RTP streams will be initiated: 1) provider's gateway -> CCM and 2) CCM -> phones/ATA.
Is there any way or any configuration to be done to allow the switch from audio to T.38 when a fax transmission occurs from/to the outside?