Login | Register For Free | Help
Search for: (Advanced)

Mailing List Archive: Cisco: VOIP

Unity Connection Subscriber Unusable after 8.6.2aSU1 Update

 

 

Cisco voip RSS feed   Index | Next | Previous | View Threaded


MLoraditch at heliontechnologies

Apr 22, 2012, 8:22 PM

Post #1 of 8 (1687 views)
Permalink
Unity Connection Subscriber Unusable after 8.6.2aSU1 Update

Upgraded the pub, upgraded the sub, switch-version on Pub ok, everything online, do switch-version sub and get this on CLI Login after boot:



/usr/local/platform/bin/cliscript.sh: line 134: /usr/local/bin/base_scripts/xmlfoo: Permission denied
/usr/local/platform/bin/cliscript.sh: line 144: /usr/local/bin/base_scripts/xmlfoo: Permission denied
Command Line Interface is starting up, please wait ...
java.io.FileNotFoundException: /var/log/active/platform/log/cli.bin (Permission denied)
at java.io.RandomAccessFile.open(Native Method)
at java.io.RandomAccessFile.<init>(RandomAccessFile.java:216)
at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.restoreIndex(ciscoRollingFileAppender.java:104)
at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.setFile(ciscoRollingFileAppender.java:43)

and it goes on





Googled around, searched the bug toolkit and didn't find anything similar. Was coming from 8.6.1. Several CLI commands are unavailable, can't switch version back, or even reboot from CLI



My plan at the moment is just to rebuild the server tomorrow. Tomcat runs but just give the main page saying no products installed, and the remote account CLIs are also unavailable so I don't see what TAC could do seeing as I can't get them in with root to fix anything. Tried to boot back to the other partition just for fun, and Grub must be set to 0 seconds. Not sure that that would even work or get me anywhere but still.



If anyone has any good ideas i'll take them.




Matthew G. Loraditch - CCVP, CCNA, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830
fax. 410.252.9284

Twitter<http://twitter.com/heliontech> | Facebook<http://www.facebook.com/#!/pages/Helion/252157915296> | Website<http://www.heliontechnologies.com/> | Email Support<mailto:support [at] heliontechnologies?subject=Technical%20Support%20Request>


wsisk at cisco

Apr 23, 2012, 8:28 AM

Post #2 of 8 (1630 views)
Permalink
Re: Unity Connection Subscriber Unusable after 8.6.2aSU1 Update [In reply to]

Most likely either readonly file system OR selinux context did not get set correctly during upgrade. Rebuild is likely the fastest recovery.

Any clues to what went awry would be in the install/upgrade log. It would be great to pull the install/upgrade logs prior to rebuild.

/wes


On Apr 22, 2012, at 11:22 PM, Matthew Loraditch wrote:

Upgraded the pub, upgraded the sub, switch-version on Pub ok, everything online, do switch-version sub and get this on CLI Login after boot:

/usr/local/platform/bin/cliscript.sh: line 134: /usr/local/bin/base_scripts/xmlfoo: Permission denied
/usr/local/platform/bin/cliscript.sh: line 144: /usr/local/bin/base_scripts/xmlfoo: Permission denied
Command Line Interface is starting up, please wait ...
java.io.FileNotFoundException: /var/log/active/platform/log/cli.bin (Permission denied)
at java.io.RandomAccessFile.open(Native Method)
at java.io.RandomAccessFile.<init>(RandomAccessFile.java:216)
at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.restoreIndex(ciscoRollingFileAppender.java:104)
at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.setFile(ciscoRollingFileAppender.java:43)
and it goes on


Googled around, searched the bug toolkit and didn't find anything similar. Was coming from 8.6.1. Several CLI commands are unavailable, can't switch version back, or even reboot from CLI

My plan at the moment is just to rebuild the server tomorrow. Tomcat runs but just give the main page saying no products installed, and the remote account CLIs are also unavailable so I don't see what TAC could do seeing as I can't get them in with root to fix anything. Tried to boot back to the other partition just for fun, and Grub must be set to 0 seconds. Not sure that that would even work or get me anywhere but still.

If anyone has any good ideas i'll take them.



Matthew G. Loraditch - CCVP, CCNA, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830
fax. 410.252.9284

Twitter | Facebook | Website | Email Support
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip


MLoraditch at heliontechnologies

Apr 23, 2012, 10:27 AM

Post #3 of 8 (1623 views)
Permalink
Re: Unity Connection Subscriber Unusable after 8.6.2aSU1 Update [In reply to]

Will RTMT work? If not what's the best way to pull manually? Heck I can get you the whole VHD if you'd like to take a look. I'm going to proceed with the rebuild but it'd be neat to know what happened

From: Wes Sisk [mailto:wsisk [at] cisco]
Sent: Monday, April 23, 2012 11:29 AM
To: Matthew Loraditch
Cc: cisco-voip [at] puck
Subject: Re: [cisco-voip] Unity Connection Subscriber Unusable after 8.6.2aSU1 Update

Most likely either readonly file system OR selinux context did not get set correctly during upgrade. Rebuild is likely the fastest recovery.

Any clues to what went awry would be in the install/upgrade log. It would be great to pull the install/upgrade logs prior to rebuild.

/wes


On Apr 22, 2012, at 11:22 PM, Matthew Loraditch wrote:


Upgraded the pub, upgraded the sub, switch-version on Pub ok, everything online, do switch-version sub and get this on CLI Login after boot:


/usr/local/platform/bin/cliscript.sh: line 134: /usr/local/bin/base_scripts/xmlfoo: Permission denied
/usr/local/platform/bin/cliscript.sh: line 144: /usr/local/bin/base_scripts/xmlfoo: Permission denied
Command Line Interface is starting up, please wait ...
java.io.FileNotFoundException: /var/log/active/platform/log/cli.bin (Permission denied)
at java.io.RandomAccessFile.open(Native Method)
at java.io.RandomAccessFile.<init>(RandomAccessFile.java:216)
at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.restoreIndex(ciscoRollingFileAppender.java:104)
at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.setFile(ciscoRollingFileAppender.java:43)
and it goes on




Googled around, searched the bug toolkit and didn't find anything similar. Was coming from 8.6.1. Several CLI commands are unavailable, can't switch version back, or even reboot from CLI


My plan at the moment is just to rebuild the server tomorrow. Tomcat runs but just give the main page saying no products installed, and the remote account CLIs are also unavailable so I don't see what TAC could do seeing as I can't get them in with root to fix anything. Tried to boot back to the other partition just for fun, and Grub must be set to 0 seconds. Not sure that that would even work or get me anywhere but still.


If anyone has any good ideas i'll take them.




Matthew G. Loraditch - CCVP, CCNA, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830
fax. 410.252.9284

Twitter<http://twitter.com/heliontech> | Facebook<http://www.facebook.com/#!/pages/Helion/252157915296> | Website<http://www.heliontechnologies.com/> | Email Support<mailto:support [at] heliontechnologies?subject=Technical%20Support%20Request>
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck<mailto:cisco-voip [at] puck>
https://puck.nether.net/mailman/listinfo/cisco-voip


wsisk at cisco

Apr 23, 2012, 11:26 AM

Post #4 of 8 (1625 views)
Permalink
Re: Unity Connection Subscriber Unusable after 8.6.2aSU1 Update [In reply to]

Yep, RTMT should get it.
https://supportforums.cisco.com/docs/DOC-16943
Cisco Database Installation Service
Install and Upgrade Logs

if you rebooted to the old version then retrieve from inactive partition. If you're still on the new version with everything failing then you may have to use CLI. If using CLI the paths are stated in the doc cited above. 'file get ....'

/wes


On Apr 23, 2012, at 1:27 PM, Matthew Loraditch wrote:

Will RTMT work? If not whats the best way to pull manually? Heck I can get you the whole VHD if youd like to take a look. Im going to proceed with the rebuild but itd be neat to know what happened

From: Wes Sisk [mailto:wsisk [at] cisco]
Sent: Monday, April 23, 2012 11:29 AM
To: Matthew Loraditch
Cc: cisco-voip [at] puck
Subject: Re: [cisco-voip] Unity Connection Subscriber Unusable after 8.6.2aSU1 Update

Most likely either readonly file system OR selinux context did not get set correctly during upgrade. Rebuild is likely the fastest recovery.

Any clues to what went awry would be in the install/upgrade log. It would be great to pull the install/upgrade logs prior to rebuild.

/wes


On Apr 22, 2012, at 11:22 PM, Matthew Loraditch wrote:


Upgraded the pub, upgraded the sub, switch-version on Pub ok, everything online, do switch-version sub and get this on CLI Login after boot:

/usr/local/platform/bin/cliscript.sh: line 134: /usr/local/bin/base_scripts/xmlfoo: Permission denied
/usr/local/platform/bin/cliscript.sh: line 144: /usr/local/bin/base_scripts/xmlfoo: Permission denied
Command Line Interface is starting up, please wait ...
java.io.FileNotFoundException: /var/log/active/platform/log/cli.bin (Permission denied)
at java.io.RandomAccessFile.open(Native Method)
at java.io.RandomAccessFile.<init>(RandomAccessFile.java:216)
at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.restoreIndex(ciscoRollingFileAppender.java:104)
at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.setFile(ciscoRollingFileAppender.java:43)
and it goes on


Googled around, searched the bug toolkit and didn't find anything similar. Was coming from 8.6.1. Several CLI commands are unavailable, can't switch version back, or even reboot from CLI

My plan at the moment is just to rebuild the server tomorrow. Tomcat runs but just give the main page saying no products installed, and the remote account CLIs are also unavailable so I don't see what TAC could do seeing as I can't get them in with root to fix anything. Tried to boot back to the other partition just for fun, and Grub must be set to 0 seconds. Not sure that that would even work or get me anywhere but still.

If anyone has any good ideas i'll take them.



Matthew G. Loraditch - CCVP, CCNA, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830
fax. 410.252.9284

Twitter | Facebook | Website | Email Support
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip


MLoraditch at heliontechnologies

Apr 24, 2012, 6:04 AM

Post #5 of 8 (1615 views)
Permalink
Re: Unity Connection Subscriber Unusable after 8.6.2aSU1 Update [In reply to]

I can't get grub to stop so I can boot to the inactive partition and RTMT and file get don't work. I get errors on both. I'm going to start rebuilding but I've got the space to keep the old vm around so if you have any further ideas for getting the files I can do it.


Matthew G. Loraditch - CCVP, CCNA, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830
fax. 410.252.9284

Twitter<http://twitter.com/heliontech> | Facebook<http://www.facebook.com/#!/pages/Helion/252157915296> | Website<http://www.heliontechnologies.com/> | Email Support<mailto:support [at] heliontechnologies?subject=Technical%20Support%20Request>


From: Wes Sisk [mailto:wsisk [at] cisco]
Sent: Monday, April 23, 2012 2:26 PM
To: Matthew Loraditch
Cc: cisco-voip [at] puck
Subject: Re: [cisco-voip] Unity Connection Subscriber Unusable after 8.6.2aSU1 Update

Yep, RTMT should get it.
https://supportforums.cisco.com/docs/DOC-16943
Cisco Database Installation Service
Install and Upgrade Logs

if you rebooted to the old version then retrieve from inactive partition. If you're still on the new version with everything failing then you may have to use CLI. If using CLI the paths are stated in the doc cited above. 'file get ....'

/wes


On Apr 23, 2012, at 1:27 PM, Matthew Loraditch wrote:

Will RTMT work? If not what's the best way to pull manually? Heck I can get you the whole VHD if you'd like to take a look. I'm going to proceed with the rebuild but it'd be neat to know what happened

From: Wes Sisk [mailto:wsisk [at] cisco]<mailto:[mailto:wsisk [at] cisco]>
Sent: Monday, April 23, 2012 11:29 AM
To: Matthew Loraditch
Cc: cisco-voip [at] puck<mailto:cisco-voip [at] puck>
Subject: Re: [cisco-voip] Unity Connection Subscriber Unusable after 8.6.2aSU1 Update

Most likely either readonly file system OR selinux context did not get set correctly during upgrade. Rebuild is likely the fastest recovery.

Any clues to what went awry would be in the install/upgrade log. It would be great to pull the install/upgrade logs prior to rebuild.

/wes


On Apr 22, 2012, at 11:22 PM, Matthew Loraditch wrote:



Upgraded the pub, upgraded the sub, switch-version on Pub ok, everything online, do switch-version sub and get this on CLI Login after boot:

/usr/local/platform/bin/cliscript.sh: line 134: /usr/local/bin/base_scripts/xmlfoo: Permission denied
/usr/local/platform/bin/cliscript.sh: line 144: /usr/local/bin/base_scripts/xmlfoo: Permission denied
Command Line Interface is starting up, please wait ...
java.io.FileNotFoundException: /var/log/active/platform/log/cli.bin (Permission denied)
at java.io.RandomAccessFile.open(Native Method)
at java.io.RandomAccessFile.<init>(RandomAccessFile.java:216)
at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.restoreIndex(ciscoRollingFileAppender.java:104)
at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.setFile(ciscoRollingFileAppender.java:43)
and it goes on


Googled around, searched the bug toolkit and didn't find anything similar. Was coming from 8.6.1. Several CLI commands are unavailable, can't switch version back, or even reboot from CLI

My plan at the moment is just to rebuild the server tomorrow. Tomcat runs but just give the main page saying no products installed, and the remote account CLIs are also unavailable so I don't see what TAC could do seeing as I can't get them in with root to fix anything. Tried to boot back to the other partition just for fun, and Grub must be set to 0 seconds. Not sure that that would even work or get me anywhere but still.

If anyone has any good ideas i'll take them.



Matthew G. Loraditch - CCVP, CCNA, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830
fax. 410.252.9284

Twitter<http://twitter.com/heliontech> | Facebook<http://www.facebook.com/#!/pages/Helion/252157915296> | Website<http://www.heliontechnologies.com/> | Email Support<mailto:support [at] heliontechnologies?subject=Technical%20Support%20Request>
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck<mailto:cisco-voip [at] puck>
https://puck.nether.net/mailman/listinfo/cisco-voip


ealeatherman at gmail

Apr 24, 2012, 6:51 AM

Post #6 of 8 (1617 views)
Permalink
Re: Unity Connection Subscriber Unusable after 8.6.2aSU1 Update [In reply to]

Does the recovery disk do anything useful? Could you boot from a generic
linux CD and manually mount the filesystem to get into it?

On Tue, Apr 24, 2012 at 9:04 AM, Matthew Loraditch <
MLoraditch [at] heliontechnologies> wrote:

> I can’t get grub to stop so I can boot to the inactive partition and
> RTMT and file get don’t work. I get errors on both. I’m going to start
> rebuilding but I’ve got the space to keep the old vm around so if you have
> any further ideas for getting the files I can do it.****
>
> ** **
>
> ** **
>
> Matthew G. Loraditch - CCVP, CCNA, CCDA
>
> 1965 Greenspring Drive
> Timonium, MD 21093
>
> voice. 410.252.8830
> fax. 410.252.9284
>
> Twitter <http://twitter.com/heliontech> | Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>
> | Website <http://www.heliontechnologies.com/> | Email Support<support [at] heliontechnologies?subject=Technical%20Support%20Request>
> ****
>
> ** **
>
> ** **
>
> *From:* Wes Sisk [mailto:wsisk [at] cisco]
> *Sent:* Monday, April 23, 2012 2:26 PM
>
> *To:* Matthew Loraditch
> *Cc:* cisco-voip [at] puck
> *Subject:* Re: [cisco-voip] Unity Connection Subscriber Unusable after
> 8.6.2aSU1 Update****
>
> ** **
>
> Yep, RTMT should get it.****
>
> https://supportforums.cisco.com/docs/DOC-16943****
>
> Cisco Database Installation Service****
>
> Install and Upgrade Logs****
>
> ** **
>
> if you rebooted to the old version then retrieve from inactive partition.
> If you're still on the new version with everything failing then you may
> have to use CLI. If using CLI the paths are stated in the doc cited above.
> 'file get ....'****
>
> ** **
>
> /wes****
>
> ** **
>
> ** **
>
> On Apr 23, 2012, at 1:27 PM, Matthew Loraditch wrote:****
>
> ** **
>
> Will RTMT work? If not what’s the best way to pull manually? Heck I can
> get you the whole VHD if you’d like to take a look. I’m going to proceed
> with the rebuild but it’d be neat to know what happened****
>
> ****
>
> *From:* Wes Sisk [mailto:wsisk [at] cisco]
> *Sent:* Monday, April 23, 2012 11:29 AM
> *To:* Matthew Loraditch
> *Cc:* cisco-voip [at] puck
> *Subject:* Re: [cisco-voip] Unity Connection Subscriber Unusable after
> 8.6.2aSU1 Update****
>
> ****
>
> Most likely either readonly file system OR selinux context did not get set
> correctly during upgrade. Rebuild is likely the fastest recovery.****
>
> ****
>
> Any clues to what went awry would be in the install/upgrade log. It would
> be great to pull the install/upgrade logs prior to rebuild.****
>
> ****
>
> /wes****
>
> ****
>
> ****
>
> On Apr 22, 2012, at 11:22 PM, Matthew Loraditch wrote:****
>
>
>
>
> ****
>
> Upgraded the pub, upgraded the sub, switch-version on Pub ok, everything
> online, do switch-version sub and get this on CLI Login after boot:****
>
> ****
>
> /usr/local/platform/bin/cliscript.sh: line 134:
> /usr/local/bin/base_scripts/xmlfoo: Permission denied
> /usr/local/platform/bin/cliscript.sh: line 144:
> /usr/local/bin/base_scripts/xmlfoo: Permission denied
> Command Line Interface is starting up, please wait ...
> java.io.FileNotFoundException: /var/log/active/platform/log/cli.bin
> (Permission denied)
> at java.io.RandomAccessFile.open(Native Method)
> at java.io.RandomAccessFile.<init>(RandomAccessFile.java:216)
> at
> com.cisco.iptplatform.fappend.ciscoRollingFileAppender.restoreIndex(ciscoRollingFileAppender.java:104)
> at
> com.cisco.iptplatform.fappend.ciscoRollingFileAppender.setFile(ciscoRollingFileAppender.java:43)
> ****
>
> and it goes on****
>
> ****
>
> ****
>
> Googled around, searched the bug toolkit and didn't find anything similar.
> Was coming from 8.6.1. Several CLI commands are unavailable, can't switch
> version back, or even reboot from CLI****
>
> ****
>
> My plan at the moment is just to rebuild the server tomorrow. Tomcat runs
> but just give the main page saying no products installed, and the remote
> account CLIs are also unavailable so I don't see what TAC could do seeing
> as I can't get them in with root to fix anything. Tried to boot back to the
> other partition just for fun, and Grub must be set to 0 seconds. Not sure
> that that would even work or get me anywhere but still.****
>
> ****
>
> If anyone has any good ideas i'll take them.****
>
>
> ****
>
> ****
>
> Matthew G. Loraditch - CCVP, CCNA, CCDA
>
> 1965 Greenspring Drive
> Timonium, MD 21093
>
> voice. 410.252.8830
> fax. 410.252.9284
>
> Twitter <http://twitter.com/heliontech> | Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>
> | Website <http://www.heliontechnologies.com/> | Email Support<support [at] heliontechnologies?subject=Technical%20Support%20Request>
> ****
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-voip****
>
> ****
>
> ** **
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


--
Ed Leatherman


wsisk at cisco

Apr 24, 2012, 6:56 AM

Post #7 of 8 (1623 views)
Permalink
Re: Unity Connection Subscriber Unusable after 8.6.2aSU1 Update [In reply to]

you can use the recovery disk to switch to inactive.

/wes

On Apr 24, 2012, at 9:04 AM, Matthew Loraditch wrote:

I cant get grub to stop so I can boot to the inactive partition and RTMT and file get dont work. I get errors on both. Im going to start rebuilding but Ive got the space to keep the old vm around so if you have any further ideas for getting the files I can do it.


Matthew G. Loraditch - CCVP, CCNA, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830
fax. 410.252.9284

Twitter | Facebook | Website | Email Support



From: Wes Sisk [mailto:wsisk [at] cisco]
Sent: Monday, April 23, 2012 2:26 PM
To: Matthew Loraditch
Cc: cisco-voip [at] puck
Subject: Re: [cisco-voip] Unity Connection Subscriber Unusable after 8.6.2aSU1 Update

Yep, RTMT should get it.
https://supportforums.cisco.com/docs/DOC-16943
Cisco Database Installation Service
Install and Upgrade Logs

if you rebooted to the old version then retrieve from inactive partition. If you're still on the new version with everything failing then you may have to use CLI. If using CLI the paths are stated in the doc cited above. 'file get ....'

/wes


On Apr 23, 2012, at 1:27 PM, Matthew Loraditch wrote:

Will RTMT work? If not whats the best way to pull manually? Heck I can get you the whole VHD if youd like to take a look. Im going to proceed with the rebuild but itd be neat to know what happened

From: Wes Sisk [mailto:wsisk [at] cisco]
Sent: Monday, April 23, 2012 11:29 AM
To: Matthew Loraditch
Cc: cisco-voip [at] puck
Subject: Re: [cisco-voip] Unity Connection Subscriber Unusable after 8.6.2aSU1 Update

Most likely either readonly file system OR selinux context did not get set correctly during upgrade. Rebuild is likely the fastest recovery.

Any clues to what went awry would be in the install/upgrade log. It would be great to pull the install/upgrade logs prior to rebuild.

/wes


On Apr 22, 2012, at 11:22 PM, Matthew Loraditch wrote:



Upgraded the pub, upgraded the sub, switch-version on Pub ok, everything online, do switch-version sub and get this on CLI Login after boot:

/usr/local/platform/bin/cliscript.sh: line 134: /usr/local/bin/base_scripts/xmlfoo: Permission denied
/usr/local/platform/bin/cliscript.sh: line 144: /usr/local/bin/base_scripts/xmlfoo: Permission denied
Command Line Interface is starting up, please wait ...
java.io.FileNotFoundException: /var/log/active/platform/log/cli.bin (Permission denied)
at java.io.RandomAccessFile.open(Native Method)
at java.io.RandomAccessFile.<init>(RandomAccessFile.java:216)
at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.restoreIndex(ciscoRollingFileAppender.java:104)
at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.setFile(ciscoRollingFileAppender.java:43)
and it goes on


Googled around, searched the bug toolkit and didn't find anything similar. Was coming from 8.6.1. Several CLI commands are unavailable, can't switch version back, or even reboot from CLI

My plan at the moment is just to rebuild the server tomorrow. Tomcat runs but just give the main page saying no products installed, and the remote account CLIs are also unavailable so I don't see what TAC could do seeing as I can't get them in with root to fix anything. Tried to boot back to the other partition just for fun, and Grub must be set to 0 seconds. Not sure that that would even work or get me anywhere but still.

If anyone has any good ideas i'll take them.



Matthew G. Loraditch - CCVP, CCNA, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830
fax. 410.252.9284

Twitter | Facebook | Website | Email Support
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip


MLoraditch at heliontechnologies

Apr 25, 2012, 2:02 PM

Post #8 of 8 (1632 views)
Permalink
Re: Unity Connection Subscriber Unusable after 8.6.2aSU1 Update [In reply to]

To Wrap around to the group, it appears I hit this bug: CSCtt18005 CM 8.6.2 Upgrade Failing Due to NTP Reachability

TAC took a look at the logs, and for some reason my subscriber could not reach my publisher for NTP during the upgrade. Despite the fact that AFAIK, the publisher was fully online during the upgrade process and during the switch-version and reboot of the subscriber. None of my monitoring tools nor the server itself indicate it went offline at any time while the subscriber was doing its thing.

Recovered to inactive partition and re-ran the upgrade and it completed successfully.

Thanks Wes, et al. for the help.

Matthew G. Loraditch - CCVP, CCNA, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830
fax. 410.252.9284

Twitter<http://twitter.com/heliontech> | Facebook<http://www.facebook.com/#!/pages/Helion/252157915296> | Website<http://www.heliontechnologies.com/> | Email Support<mailto:support [at] heliontechnologies?subject=Technical%20Support%20Request>


From: Wes Sisk [mailto:wsisk [at] cisco]
Sent: Tuesday, April 24, 2012 9:56 AM
To: Matthew Loraditch
Cc: cisco-voip [at] puck
Subject: Re: [cisco-voip] Unity Connection Subscriber Unusable after 8.6.2aSU1 Update

you can use the recovery disk to switch to inactive.

/wes

On Apr 24, 2012, at 9:04 AM, Matthew Loraditch wrote:


I can't get grub to stop so I can boot to the inactive partition and RTMT and file get don't work. I get errors on both. I'm going to start rebuilding but I've got the space to keep the old vm around so if you have any further ideas for getting the files I can do it.


Matthew G. Loraditch - CCVP, CCNA, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830
fax. 410.252.9284

Twitter<http://twitter.com/heliontech> | Facebook<http://www.facebook.com/#!/pages/Helion/252157915296> | Website<http://www.heliontechnologies.com/> | Email Support<mailto:support [at] heliontechnologies?subject=Technical%20Support%20Request>


From: Wes Sisk [mailto:wsisk [at] cisco]<mailto:[mailto:wsisk [at] cisco]>
Sent: Monday, April 23, 2012 2:26 PM
To: Matthew Loraditch
Cc: cisco-voip [at] puck<mailto:cisco-voip [at] puck>
Subject: Re: [cisco-voip] Unity Connection Subscriber Unusable after 8.6.2aSU1 Update

Yep, RTMT should get it.
https://supportforums.cisco.com/docs/DOC-16943
Cisco Database Installation Service
Install and Upgrade Logs

if you rebooted to the old version then retrieve from inactive partition. If you're still on the new version with everything failing then you may have to use CLI. If using CLI the paths are stated in the doc cited above. 'file get ....'

/wes


On Apr 23, 2012, at 1:27 PM, Matthew Loraditch wrote:

Will RTMT work? If not what's the best way to pull manually? Heck I can get you the whole VHD if you'd like to take a look. I'm going to proceed with the rebuild but it'd be neat to know what happened

From: Wes Sisk [mailto:wsisk [at] cisco]<mailto:[mailto:wsisk [at] cisco]>
Sent: Monday, April 23, 2012 11:29 AM
To: Matthew Loraditch
Cc: cisco-voip [at] puck<mailto:cisco-voip [at] puck>
Subject: Re: [cisco-voip] Unity Connection Subscriber Unusable after 8.6.2aSU1 Update

Most likely either readonly file system OR selinux context did not get set correctly during upgrade. Rebuild is likely the fastest recovery.

Any clues to what went awry would be in the install/upgrade log. It would be great to pull the install/upgrade logs prior to rebuild.

/wes


On Apr 22, 2012, at 11:22 PM, Matthew Loraditch wrote:




Upgraded the pub, upgraded the sub, switch-version on Pub ok, everything online, do switch-version sub and get this on CLI Login after boot:

/usr/local/platform/bin/cliscript.sh: line 134: /usr/local/bin/base_scripts/xmlfoo: Permission denied
/usr/local/platform/bin/cliscript.sh: line 144: /usr/local/bin/base_scripts/xmlfoo: Permission denied
Command Line Interface is starting up, please wait ...
java.io.FileNotFoundException: /var/log/active/platform/log/cli.bin (Permission denied)
at java.io.RandomAccessFile.open(Native Method)
at java.io.RandomAccessFile.<init>(RandomAccessFile.java:216)
at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.restoreIndex(ciscoRollingFileAppender.java:104)
at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.setFile(ciscoRollingFileAppender.java:43)
and it goes on


Googled around, searched the bug toolkit and didn't find anything similar. Was coming from 8.6.1. Several CLI commands are unavailable, can't switch version back, or even reboot from CLI

My plan at the moment is just to rebuild the server tomorrow. Tomcat runs but just give the main page saying no products installed, and the remote account CLIs are also unavailable so I don't see what TAC could do seeing as I can't get them in with root to fix anything. Tried to boot back to the other partition just for fun, and Grub must be set to 0 seconds. Not sure that that would even work or get me anywhere but still.

If anyone has any good ideas i'll take them.



Matthew G. Loraditch - CCVP, CCNA, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830
fax. 410.252.9284

Twitter<http://twitter.com/heliontech> | Facebook<http://www.facebook.com/#!/pages/Helion/252157915296> | Website<http://www.heliontechnologies.com/> | Email Support<mailto:support [at] heliontechnologies?subject=Technical%20Support%20Request>
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck<mailto:cisco-voip [at] puck>
https://puck.nether.net/mailman/listinfo/cisco-voip

Cisco voip RSS feed   Index | Next | Previous | View Threaded
 
 


Interested in having your list archived? Contact Gossamer Threads
 
  Web Applications & Managed Hosting Powered by Gossamer Threads Inc.