mikeeo at msn
Mar 1, 2012, 5:31 AM
Views: 1736
Permalink
|
You will need to build them side by side. Export/import is your friend.
From: Andrii Matlavskyi [mailto:mynewlogin [at] gmail]
Sent: Thursday, March 01, 2012 2:43 AM
To: Mike
Cc: Beck, Andre; cisco-voip [at] puck
Subject: Re: [cisco-voip] Bridge upgrade vs. sub(s)
Hi all!
I need to make upgrade of CUCM version 4.1 to 8.6.
Now CUCM is on DL380-G3.
New servers are UCS C200M2 with ESXi hypervisor.
So, we can't make direct upgrade from 4.1 to 8.6 and on DL380-G3 we can't
upgrade to any 8.x version.
What can be the best upgrade scenarios?
2012/2/29 Mike <mikeeo [at] msn>
I used to know the database value, but I'm sure TAC can tell you.
-----Original Message-----
From: cisco-voip-bounces [at] puck
[mailto:cisco-voip-bounces [at] puck] On Behalf Of Beck, Andre
Sent: Wednesday, February 29, 2012 10:47 AM
To: Mike
Cc: cisco-voip [at] puck
Subject: Re: [cisco-voip] Bridge upgrade vs. sub(s)
Hi Mike,
On Tue, Feb 28, 2012 at 05:49:37PM -0500, Mike wrote:
> Once you install any release prior 8.x on VMWARE it marks the database
> as unsupported even when you upgrade to ver8.x. It's a huge issue in
> the field and I wish Cisco would address it.
Oops.
Unce upon a time, I ported my CCM 5.1 to 7.0 via an intermediate ESX VM.
I don't remember the exact steps involved (it turned out to be a little
sophisticated), but I'm somewhat sure the DB, or even the entire
installation, was on a VM for some time. Can I check whether the DB is now
marked as unsupported?
TIA,
Andre.
--
Cool .signatures are so 90s...
-> Andre Beck +++ ABP-RIPE +++ IBH IT-Service GmbH, Dresden <-
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip
--
З повагою, Андрій Матлавський.
|
