afrankel at cisco
Nov 30, 2009, 11:42 AM
Post #2 of 2
(332 views)
Permalink
|
Step 1 Log in to the system, using local console, with the following
username and
password:
- Username: pwrecovery
- Password: pwreset
The Welcome to admin password reset window displays.
Step 2 Press any key to continue.
Step 3 If you have a CD or DVD in the disk drive, remove it now.
Step 4 Press any key to continue.
The system tests to ensure that you have removed the CD or DVD from the
disk
drive.
Step 5 Insert a valid CD or DVD into the disk drive.
The system tests to ensure that you have inserted the disk.
Step 6 After the system verifies that you have inserted the disk, you
get
prompted to select the password you want to reset. Select "S" for the
security password.
Step 7 Follow instructions to complete the process.
It's in the OS Admin guide I believe.
Adam
------------Original Message--------------
From: O'Donovan, Kevin (ITD) <Kevin.Odonovan [at] state>
Sent: Mon, Nov 30, 2009 2:25:07 Pm
To: cisco-voip [at] puck
CC:
Subject: [cisco-voip] recover FORGOTTEN security password
>
> Is there a way to recover a FORGOTTEN security password on CUCM 6.1.2
> Publisher without starting from scratch? I've done quite a bit of
> configuration on it.
>
> I was adding a Subscriber when it failed - "first node is not a first
> node etc, ." I checked the security password and found I can't change it.
>
> The person who set up the Pub can't remember what it was and I tried
> several variations. All my attempts were unsuccessful.
>
> The good thing is it's not a production system yet but I really don't
> want to type that info back in again.
>
> I do have a backup but will that restore with the old (unknown)
> security password.
>
>
>
> Hopefully,
>
> Kevin
>
>
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
|
