Mailing List Archive: Cisco: VOIP

3rd party SIP questions

Index | Next | Previous | View Threaded

lmeade at signal

Nov 24, 2009, 11:56 AM

Post #1 of 3 (402 views)
Permalink

3rd party SIP questions

I am trying to wrap my head around this. I have a CME site with CUE and
it is working great. I am wanting to run some 3rd party SIP clients on
this. I can set them up and call them from the Main office with no
problems. But I only get inbound ring tone and "dead air". So I am
looking at a Codex issue ? But if my CUE is working this should tell me
that I am able to transcode G711 into G729.

Any help in pointing me in the right direction ?

craig at staffin

Nov 24, 2009, 12:00 PM

Post #2 of 3 (370 views)
Permalink

Re: 3rd party SIP questions [In reply to]

what does the config look like for the SIP ephone

voice pools and voice register global

Also SIP phones do not support voice-class codec they only support a hard
coded codec.

Lastly what version of CME/IOS

On Tue, Nov 24, 2009 at 1:56 PM, Leslie Meade <lmeade [at] signal> wrote:

> I am trying to wrap my head around this. I have a CME site with CUE and it
> is working great. I am wanting to run some 3rd party SIP clients on this.
> I can set them up and call them from the Main office with no problems. But I
> only get inbound ring tone and “dead air”. So I am looking at a Codex issue
> ? But if my CUE is working this should tell me that I am able to transcode
> G711 into G729.
>
>
>
> Any help in pointing me in the right direction ?
>
>
>
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>

mh at markholloway

Nov 24, 2009, 12:32 PM

Post #3 of 3 (371 views)
Permalink

Re: 3rd party SIP questions [In reply to]

What happens if you force all endpoints to G.711 and place a call?

On Nov 24, 2009, at 12:56 PM, Leslie Meade wrote:

> I am trying to wrap my head around this. I have a CME site with CUE and it is working great. I am wanting to run some 3rd party SIP clients on this. I can set them up and call them from the Main office with no problems. But I only get inbound ring tone and “dead air”. So I am looking at a Codex issue ? But if my CUE is working this should tell me that I am able to transcode G711 into G729.
>
> Any help in pointing me in the right direction ?
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-voip

Index | Next | Previous | View Threaded

Interested in having your list archived? Contact Gossamer Threads