jason.aarons at us
Nov 23, 2009, 9:49 AM
Post #2 of 5
(878 views)
Permalink
|
I setup this up in 7.1(3) last week and had no issues.
After I hangup my mobile and couple seconds later I get what looks like a call on hold. I hit Resume and become connected to caller.
Nothing had to be done to my MGCP gateway.
From: cisco-voip-bounces [at] puck [mailto:cisco-voip-bounces [at] puck] On Behalf Of Jamie Weatherhead
Sent: Monday, November 23, 2009 8:20 AM
To: cisco-voip [at] puck
Subject: [cisco-voip] Mobile Connect SNR problem
Afternoon all,
I am running CUCM 6.1(3) and have configured mobile connect. I have setup a remote destination profile and remote destination to point to my mobile (cell) phone.
I can get my IP phone and mobile to ring simultaneously. However, when I take the incoming call on my mobile and disconnect, I’m not able to continue the call on my IP phone. If I attempt to pickup the connected line I get a ‘no conference bridge’ message.
I am dialling out of a h323 gateway and have followed Cisco’s configuration notes. I have also tried multiple mobile phone service providers but to no avail.
Is there any configuration work I need to do on the voice gateway?
Any assistance would be appreciated.
Jamie Weatherhead
Consider the environment - Think before you print
The contents of this email are confidential to the intended recipient and may not be disclosed. Although it is believed that this email and any attachments are virus free, it is the responsibility of the recipient to confirm this.
You are advised that urgent, time-sensitive communications should not be sent by email. We hereby give you notice that a delivery receipt does not constitute acknowledgement or receipt by the intended recipient(s).
Details of Charles Stanley group companies and their regulators (where applicable), can be found at this URL http://www.charles-stanley.co.uk/contact-us/disclosure/ <http://www.charles-stanley.co.uk/contact-us/disclosure/>
-----------------------------------------
Disclaimer:
This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
|
