craig at staffin
Nov 19, 2009, 8:43 AM
Post #2 of 2
(388 views)
Permalink
|
can you post the relevant config from the router
what version of CUCM what version of IOS and so on
On Thu, Nov 19, 2009 at 9:22 AM, Nenad Lazarevic <nesalazarevic [at] yahoo>wrote:
> I have configure Mobile Voice Access on CCM 7.1.2 and my H323 GW,
>
> PSTN phone----->FXO-H323 GW.----->Voice mobile access number ------->CCM
>
> but when I call number for remote access from PSTN phone who point to voice
> mobile access number I hear only continuous ringing and I have no answer
> from CCM with IVR Prompt.
>
> sh call active voice brief output is. And 89999 is my Voice Mobile Access
> Number
>
> Router#sh call active voice brief
> Telephony call-legs: 1
> SIP call-legs: 0
> H323 call-legs: 1
> Call agent controlled call-legs: 0
> SCCP call-legs: 0
> Multicast call-legs: 0
> Media call-legs: 0
> Total call-legs: 2
> 1252 : 58 5606160ms.1 +-1 pid:11 Answer connected
> dur 00:00:00 tx:0/0 rx:0/0
> Tele 0/0/1 (58) [0/0/1] tx:0/0/0ms None noise:0 acom:0 i/0:0/0 dBm
> 1252 : 59 5606170ms.1 +-1 pid:302 Originate 89999 connecting
> dur 00:00:00 tx:0/0 rx:0/0
> IP 0.0.0.0:0 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms None
> TextRelay: off
> media inactive detected:n media contrl rcvd:n/a timestamp:n/a
> long duration call detected:n long duration call duration:n/a
> timestamp:n/a
>
> Any Advice?
>
> Regards Nenad
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
|
