m.bufton at spectra-group
Nov 18, 2009, 8:41 AM
Post #1 of 1
(540 views)
Permalink
|
|
Re: E1 Card and Voice ports 3845[Scanned]
|
|
I still cant get the thing to register.
I'm currently using a loopback plug as I wont get my E1 connect for a week or two.
Here is my config can any one see what Im missing? I have also included show ccm-manager
CCM is configure with the FQDN of the router MGCP-GW1-RT.**.local
#show run
version 12.4
no service pad
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
!
hostname MGCP-GW1-RT
!
boot-start-marker
boot-end-marker
!
card type e1 0 0
logging buffered 51200 warnings
!
no aaa new-model
clock timezone GMT 0
clock summer-time BST recurring last Sun Mar 2:00 last Sun Oct 2:00
network-clock-participate wic 0
network-clock-select 1 E1 0/0/0
dot11 syslog
!
!
ip cef
!
!
no ip bootp server
no ip domain lookup
ip domain name **.local
multilink bundle-name authenticated
!
isdn switch-type primary-dpnss
voice-card 0
no dspfarm
!
!
archive
log config
hidekeys
!
!
controller E1 0/0/0
pri-group timeslots 1-31 service mgcp
!
controller E1 0/0/1
!
ip tcp synwait-time 10
!
!
!
!
interface Port-channel1
description
ip address 172.16.74.100 255.255.255.0
hold-queue 150 in
!
interface GigabitEthernet0/0
description Member of Etherchannel conected to Core-Sw gig 2/0/19
no ip address
duplex auto
speed auto
media-type rj45
channel-group 1
!
interface GigabitEthernet0/1
description Member of Etherchannel conected to Core-Sw gig 1/0/19
no ip address
duplex auto
speed auto
media-type rj45
channel-group 1
!
interface Serial0/0/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-dpnss
isdn incoming-voice voice
isdn bind-l3 ccm-manager
no cdp enable
!
ip forward-protocol nd
!
voice-port 0/0/0:15
!
ccm-manager mgcp
ccm-manager config server 172.16.74.10
!
mgcp
mgcp call-agent 172.16.74.10 service-type mgcp version 1.0
!
mgcp profile default
!
!
!
dial-peer voice 1 pots
service mgcpapp
port 0/0/0:15
!
show ccm
MGCP Domain Name: MGCP-GW1-RT.**.local
Priority Status Host
============================================================
Primary Registering with CM 172.16.74.10
First Backup None
Second Backup None
Current active Call Manager: None
Backhaul/Redundant link port: 2428
Failover Interval: 30 seconds
Keepalive Interval: 15 seconds
Last keepalive sent: 15:30:21 GMT Nov 18 2009 (elapsed time: 01:09:06)
Last MGCP traffic time: 16:39:24 GMT Nov 18 2009 (elapsed time: 00:00:04)
Last failover time: None
Last switchback time: None
Switchback mode: Graceful
MGCP Fallback mode: Not Selected
Last MGCP Fallback start time: None
Last MGCP Fallback end time: None
MGCP Download Tones: Disabled
TFTP retry count to shut Ports: 2
Backhaul Link info:
Link Protocol: TCP
Remote Port Number: 2428
Remote IP Address: 172.16.74.10
Current Link State: OPEN
Statistics:
Packets recvd: 0
Recv failures: 0
Packets xmitted: 0
Xmit failures: 0
PRI Ports being backhauled:
Slot 0, VIC 0, port 0
FAX mode: cisco
Configuration Error History:
________________________________
From: emre yunus [mailto:yeerduran [at] gmail]
Sent: Wed 18/11/2009 2:41 PM
To: Martin Bufton
Subject: Re: [cisco-voip] E1 Card and Voice ports 3845[Scanned]
you need to specify the port
conf t
card type
On Wed, Nov 18, 2009 at 9:02 AM, Martin Bufton <m.bufton [at] spectra-group> wrote:
Good afternoon.
I need help with a PRI card, please.
It is installed in a Cisco 3845 running C3845-SPServicesK9-M 12.4 (15)T9
The card is a VWIC2-2MFT-T1/E1 installed in HWIC0
I plan to use this as a MGCP gateway.
I'm expecting to see the voice-ports in the configuration. but the running configure doesn't show anything about the presence of the card.
Show version reports "2 channelized (E1 or T1)/PRI ports"
Thanks in advance
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip
|
