rratliff at cisco
Nov 9, 2009, 3:45 PM
Post #2 of 2
(429 views)
Permalink
|
|
Re: Setting up Test PRI with the ability to call in
[In reply to]
|
|
If you want to test the SRST router then you'll need the DID numbers
that route calls into that PRI. CUCM translation patterns won't help
since when in SRST mode the router doesn't have connectivity to the
CUCM server.
-Ryan
On Nov 9, 2009, at 6:35 PM, Monica Hardy wrote:
Hello,
I have a test PRI that I can call out from fine. I want to test
incoming calls for a SRST router with this PRI before I ship the router
out. How can I test incoming calls on this test PRI? I think I need
to build a translation pattern. I do know the first 5 numbers in the
DID range.
What do I need to do to get this working?
I am running CCM 7.0.2
Thank you
-Monica
--------------------------------------------
<image001.gif>
Monica P. Hardy
Openwave
Sr. Network Engineer
Phone: 650-480-5597
email: monica.hardy [at] openwave
_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip
|
image001.gif
