svoll.voip at gmail
Nov 9, 2009, 7:50 AM
Post #2 of 2
(71 views)
Permalink
|
|
Re: configuring h323 gateway with cucm 6.1
[In reply to]
|
|
outbound is pots and the FXO / PRI / etc Port
inbound is VoIP and it's the CM ip address.
Scott
On Sat, Nov 7, 2009 at 11:26 AM, anand <anand.eee[at]gmail.com> wrote:
> Hi.
>
> I am very new to configuring CISCO UNIFIED COMMUNICATIONS MANGER (CUCM).
>
> I have CUCM 6.1 on central site.I have connected CUCM , phone and
> router(H323 gateway) to the switch.All the devices have ip addres from
> 10.10.10.1-31 with sunet mask of /27.
>
> On the remote site i have router(h323 gateway) , phone connected to
> switch.All the devices are on the network 10.10.10.33-63 with a subnet mask
> of /27.I want to register all the phones with call manger in the central
> site.
>
> Both the gateways are connected back to back.
>
> My question is on the remote site gateway, while configuring the dial peer
> session target which ip address should i give?
>
> Should i give the ip address of gateaway's ethernet interface or callmanger
> ip address.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip[at]puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
|
