jbuchanan at ctiusa
Nov 7, 2009, 1:11 PM
Post #3 of 3
(392 views)
Permalink
|
To elaborate, with 7.1(3) you supposedly can use SIP with MVA if by
some chance you're not using H323.
From: cisco-voip-bounces [at] puck
[mailto:cisco-voip-bounces [at] puck] On Behalf Of MIHI
Sent: Saturday, November 07, 2009 12:14 PM
To: 'Jason Aarons (US)'; cisco-voip [at] puck
Subject: Re: [cisco-voip] Mobile Connect with CallManager 7.1
Only the inbound part (MVA) requires these.
________________________________
From: cisco-voip-bounces [at] puck
[mailto:cisco-voip-bounces [at] puck] On Behalf Of Jason Aarons
(US)
Sent: Saturday, November 07, 2009 4:08 AM
To: cisco-voip [at] puck
Subject: [cisco-voip] Mobile Connect with CallManager 7.1
Does Mobile Connect (single number reach) under CallManager 7.1 require
H323/VxML?
________________________________
Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you.
|
