Mailing List Archive: Cisco: VOIP

Sidecar display?

Index | Next | Previous | View Threaded

notariannil1 at scranton

Nov 4, 2009, 12:35 PM

Post #1 of 6 (123 views)
Permalink

Sidecar display?

We upgraded to Call Manager 7.1.2.20000-2.

I went to visit another office today that we just converted to VoIP and
noticed that their sidecar display which is programmed for
SpeedDial/BLF's show envelopes if someone has a message. I also
noticed that the light flashes if their phone is ringing. They do not
need to see these features.

Lisa

Attachments:

LNsignatureFile.gif (11.2 KB)

MLoraditch at heliontechnologies

Nov 4, 2009, 12:51 PM

Post #2 of 6 (121 views)
Permalink

Re: Sidecar display? [In reply to]

that sounds like they are setup as lines not speed dials I would check that out in ccmadmin

Matthew Loraditch
1965 Greenspring Drive
Timonium, MD 21093
support[at]heliontechnologies.com<mailto:support[at]heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com<http://www.heliontechnologies.com>
Support Issue? Email support[at]heliontechnologies.com<mailto:support[at]heliontechnologies.com> for fast assistance!

From: cisco-voip-bounces[at]puck.nether.net [mailto:cisco-voip-bounces[at]puck.nether.net] On Behalf Of Lisa Notarianni
Sent: Wednesday, November 04, 2009 3:36 PM
To: cisco-voip[at]puck.nether.net
Subject: [cisco-voip] Sidecar display?

We upgraded to Call Manager 7.1.2.20000-2.

I went to visit another office today that we just converted to VoIP and noticed that their sidecar display which is programmed for SpeedDial/BLF's show envelopes if someone has a message. I also noticed that the light flashes if their phone is ringing. They do not need to see these features.

Lisa

[cid:image001.gif[at]01CA5D66.9B023160]

Attachments:

image001.gif (11.2 KB)

cristobalpriego at gmail

Nov 4, 2009, 12:57 PM

Post #3 of 6 (121 views)
Permalink

Re: Sidecar display? [In reply to]

on the phone button template for the side car set the buttons to be speed
dial only.

2009/11/4 Lisa Notarianni <notariannil1[at]scranton.edu>

> We upgraded to Call Manager 7.1.2.20000-2.
>
> I went to visit another office today that we just converted to VoIP and
> noticed that their sidecar display which is programmed for SpeedDial/BLF's
> show envelopes if someone has a message. I also noticed that the light
> flashes if their phone is ringing. They do not need to see these features.
>
> Lisa
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip[at]puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>

Attachments:

LNsignatureFile.gif (11.2 KB)

notariannil1 at scranton

Nov 4, 2009, 12:58 PM

Post #4 of 6 (121 views)
Permalink

Re: Sidecar display? [In reply to]

No they are definitely working as speed dials and BLF's. No dial tone
when you press the buttons.

Matthew Loraditch wrote:
>
> that sounds like they are setup as lines not speed dials I would check
> that out in ccmadmin
>
>
>
>
>
> *Matthew Loraditch*
> 1965 Greenspring Drive
>
> Timonium, MD 21093
> support[at]heliontechnologies.com <mailto:support[at]heliontechnologies.com>
> (p) (410) 252-8830
> (F) (443) 541-1593
>
> Visit us at www.heliontechnologies.com
> <http://www.heliontechnologies.com>
> Support Issue? Email support[at]heliontechnologies.com
> <mailto:support[at]heliontechnologies.com> for fast assistance!
>
>
>
> *From:* cisco-voip-bounces[at]puck.nether.net
> [mailto:cisco-voip-bounces[at]puck.nether.net] *On Behalf Of *Lisa Notarianni
> *Sent:* Wednesday, November 04, 2009 3:36 PM
> *To:* cisco-voip[at]puck.nether.net
> *Subject:* [cisco-voip] Sidecar display?
>
>
>
> We upgraded to Call Manager 7.1.2.20000-2.
>
> I went to visit another office today that we just converted to VoIP
> and noticed that their sidecar display which is programmed for
> SpeedDial/BLF's show envelopes if someone has a message. I also
> noticed that the light flashes if their phone is ringing. They do not
> need to see these features.
>
> Lisa
>
>

--

Attachments:

LNsignatureFile.gif (11.2 KB)

cristobalpriego at gmail

Nov 4, 2009, 12:59 PM

Post #5 of 6 (121 views)
Permalink

Re: Sidecar display? [In reply to]

so what features do they need to have ?

2009/11/4 Lisa Notarianni <notariannil1[at]scranton.edu>

> No they are definitely working as speed dials and BLF's. No dial tone
> when you press the buttons.
>
>
> Matthew Loraditch wrote:
>
> that sounds like they are setup as lines not speed dials I would check
> that out in ccmadmin
>
>
>
>
>
> *Matthew Loraditch*
> 1965 Greenspring Drive
>
> Timonium, MD 21093
> support[at]heliontechnologies.com
> (p) (410) 252-8830
> (F) (443) 541-1593
>
> Visit us at www.heliontechnologies.com
> Support Issue? Email support[at]heliontechnologies.com for fast assistance!
>
>
>
> *From:* cisco-voip-bounces[at]puck.nether.net [
> mailto:cisco-voip-bounces[at]puck.nether.net<cisco-voip-bounces[at]puck.nether.net>]
> *On Behalf Of *Lisa Notarianni
> *Sent:* Wednesday, November 04, 2009 3:36 PM
> *To:* cisco-voip[at]puck.nether.net
> *Subject:* [cisco-voip] Sidecar display?
>
>
>
> We upgraded to Call Manager 7.1.2.20000-2.
>
> I went to visit another office today that we just converted to VoIP and
> noticed that their sidecar display which is programmed for SpeedDial/BLF's
> show envelopes if someone has a message. I also noticed that the light
> flashes if their phone is ringing. They do not need to see these features.
>
> Lisa
>
>
>
> --
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip[at]puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>

Attachments:

LNsignatureFile.gif (11.2 KB)

notariannil1 at scranton

Nov 5, 2009, 5:04 AM

Post #6 of 6 (101 views)
Permalink

Re: Sidecar display? [In reply to]

We are running Cisco Unity Connection version: 7.1.2.20000-140.

If I call x6205 directly it goes to the voice mailbox as it should.

However, x6204 after busy or no answer is set in Call Manager to go to
x6205.
This happens correctly, but it goes directly to beep without hearing the
greeting.

There must be a setting to say if x6204 bounces to x6205 it should go
directly to beep if no one answers. I cannot find it anywhere.

Any ideas?

--

Attachments:

LNsignatureFile.gif (11.2 KB)

Index | Next | Previous | View Threaded

Interested in having your list archived? Contact lists@gossamer-threads.com