jvw at medicineforthedefense
Jun 30, 2009, 6:32 AM
Views: 525
Permalink
|
|
FXO Outgoing Call Problem
|
|
http://www.medicineforthedefense.com/
Trying to setup some FXO ports for the first time in CallManager 5.1.3,
and having some trouble with outbound calls. Inbound are working
perfect, but when I try to place an outbound call out through the route
list with the FXO port, it just sits for about 10-15 seconds, then comes
back with a fast busy.
Here's the output of "debug vpm signal" - any ideas?
Jun 30 13:23:21.819: htsp_timer_stop3 htsp_setup_req
Jun 30 13:23:21.819: htsp_process_event: [0/1/2, FXOGS_ONHOOK,
E_HTSP_SETUP_REQ]fxogs_onhook_setup
Jun 30 13:23:21.819: [0/1/2] set signal state = 0x0 timestamp = 0
Jun 30 13:23:21.819: htsp_timer - 10000 msec
Jun 30 13:23:31.819: htsp_process_event: [0/1/2, FXOGS_WAIT_TIP_GROUND,
E_HTSP_EVENT_TIMER]fxogs_offhook_disc
Jun 30 13:23:31.819: htsp_timer_stop
Jun 30 13:23:31.819: [0/1/2] set signal state = 0x4 timestamp = 0
Jun 30 13:23:31.819: htsp_timer - 2000 msec
Jun 30 13:23:31.819: htsp_process_event: [0/1/2, FXOGS_ONHOOK,
E_HTSP_RELEASE_REQ]fxogs_onhook_release
Jun 30 13:23:31.819: htsp_timer_stop2
Jun 30 13:23:31.819: htsp_timer_stop3
Jun 30 13:23:32.087: htsp_process_event: [0/1/2, FXOGS_ONHOOK,
E_DSP_SIG_0110]
Jun 30 13:23:32.087: fxogs_line_reversal_clid_wait. On_hook line
reversal detected possibily due to crossed cable
Jun 30 13:23:33.819: htsp_process_event: [0/1/2, FXOGS_ONHOOK,
E_HTSP_EVENT_TIMER]
John V. Weigand
Help Desk Support/Executive Support
Litigation Management, Inc.
300 Allen-Bradley Drive
Suite 200
Mayfield Heights, OH 44124
Tel: 440-484-2000
Fax: 440-484-2009
Cell:
email: mailto:jvw[at]medicineforthedefense.com
PRIVILEGE AND CONFIDENTIALITY NOTICE
The information in this electronic mail is intended for the named recipients only. It may contain privileged and confidential material and may be protected under law by the Health Insurance Portability and Accountability Act. Any use of this information by anyone other than the intended receiver is prohibited. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, copying, or other use of this message or its attachments is strictly prohibited. If you have received this message in error, please notify the sender immediately by replying to this electronic e-mail or by calling (800) 778-5424. Please delete it from your computer. Thank you.
|
FXO Outgoing Call Problem
