Mailing List Archive by Gossamer Threads http://www.gossamer-threads.com/lists/cisco/voip/ en-us (c) Gossamer Threads Inc. All rights reserved. 08 Nov 2009 01:42:23 -0800 120 75 23 http://www.gossamer-threads.com/lists/cisco/voip/ http://www.gossamer-threads.com/images/lists/rss_logo.jpg Good Evening. I searched the threads on this and saw discussions about 911 but not the answer I was looking for. Which CDR report from CAR does eve 07 Nov 2009 14:17:21 -0800 http://www.gossamer-threads.com/lists/cisco/voip/120114 Hi. I am very new to configuring CISCO UNIFIED COMMUNICATIONS MANGER (CUCM). I have CUCM 6.1 on central site.I have connected CUCM , phone and route 07 Nov 2009 11:26:57 -0800 http://www.gossamer-threads.com/lists/cisco/voip/120106 I have a MCS 7925-I2 in the lab that lost power in the middle of a BIOS flash and now won't POST. Does anyone have any recommendations on recovering 07 Nov 2009 10:55:24 -0800 http://www.gossamer-threads.com/lists/cisco/voip/120109 Main Number rings into Hunt Pilot > Hunt List > Line Group > Phone A, I want to be able to go the Phone A in the Line Group and use Call Forward All 07 Nov 2009 09:03:59 -0800 http://www.gossamer-threads.com/lists/cisco/voip/120104 hi, what ccm version are you on? Generally this means you have not set the ccm version via the appliance cli (console) of the andtek server. You woul 07 Nov 2009 02:52:25 -0800 http://www.gossamer-threads.com/lists/cisco/voip/120099 Has anyone tried this technology of Topex. Let me know how the product is. www.topex.ro<http://www.topex.ro> Thanks & Regards, Humayun Sami 07 Nov 2009 01:55:30 -0800 http://www.gossamer-threads.com/lists/cisco/voip/120097 Group: I am trying to install AND phone lock out application. I am continuously getting CTI manager not available error on AND application server. An 06 Nov 2009 22:10:00 -0800 http://www.gossamer-threads.com/lists/cisco/voip/120093 Does Mobile Connect (single number reach) under CallManager 7.1 require H323/VxML? ----------------------------------------- Disclaimer: 06 Nov 2009 19:08:16 -0800 http://www.gossamer-threads.com/lists/cisco/voip/120091 We use UCCE 7.2, which has a solution for remote agents, using analog phones. The config requires that ICM use a FXS "phone" as a target, which is co 06 Nov 2009 12:26:36 -0800 http://www.gossamer-threads.com/lists/cisco/voip/120085 I have an autodialer that sends out caller ID of the attendance office of each school it calls. the system seems to work within our local Telco, but 06 Nov 2009 11:14:29 -0800 http://www.gossamer-threads.com/lists/cisco/voip/120072 Hi experts, I need to know if there is someway I can do the next: I need to graphic the traffic of my VWIC2-1MFT-T1/E1. There is 06 Nov 2009 08:54:53 -0800 http://www.gossamer-threads.com/lists/cisco/voip/120059 Can anyone help me find the link to the AXL guide for Unity Express? I have searched for about an hour now and cannot find it. I know it exists as I h 06 Nov 2009 03:17:26 -0800 http://www.gossamer-threads.com/lists/cisco/voip/120037 Anyone used the Xmedius product from Sagem-Interstar in their VoIP environment? Looking for comments - good or bad. Thank You... -- Jim Reed Swift C 05 Nov 2009 16:45:21 -0800 http://www.gossamer-threads.com/lists/cisco/voip/120014 Hi all, Running CUCM 6.1.4 and have noticed that when you log into the Personal Directory to access Address Book and Fast Dials, if you log out of 05 Nov 2009 13:55:00 -0800 http://www.gossamer-threads.com/lists/cisco/voip/120005 Anybody have any music or something else semi-entertaining that can be used for MoH that doesn't sound terrible over G.729? Thanks, -C 05 Nov 2009 13:33:52 -0800 http://www.gossamer-threads.com/lists/cisco/voip/120004 Hi My client wants to connect remotely into my desktop and access the routers in my LAN.I downloaded Open SSH server and he can login to my desktop. 05 Nov 2009 13:03:25 -0800 http://www.gossamer-threads.com/lists/cisco/voip/120003 When someone transfers a call to a mobility users the caller id that is passed through is the person transferring and not the original caller? is ther 05 Nov 2009 11:38:22 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119989 Stuck DVD in getting Critical Error - HW Type Not Supported Halted New MCS-7825-H4-IPC1 ------------------------------------- 05 Nov 2009 11:15:42 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119987 Hi, i have an MCS7825I2 running 5.1.2 (5.1.2.1000-11) I am afraid to reboot it since i don't what bios it has loaded and there is this bug on 7825I2 05 Nov 2009 08:25:23 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119966 I have a voice mailbox that is set to play the greeting then after the greeting plays callers can choose from a few options. They cannot leave a me 05 Nov 2009 08:04:26 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119957 Is there any reason we couldn't (or shouldn't) hang a network printer off of the PC port of a 7960? The documentation is a little vague ... only stat 05 Nov 2009 07:07:38 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119950 found this to be very useful in helping tell me what service options are available for a particular product... http://www.cisco-servicefinder.com/ 05 Nov 2009 06:23:15 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119944 Yes, we also made the 144 port mistake, that was not pretty! So far I have not been able to find a good setting that consistently works without thr 05 Nov 2009 06:10:01 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119941 We have a number of users running thin client citrix desktop's over Wyse boxes (presentation server 4.5), and these users would like to use VT advanta 05 Nov 2009 06:06:00 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119940 Hello all. I'm trying to backup a voip connection with a branch via PSTN. The branch has SRST configured and the phones are switching to branch route 05 Nov 2009 05:57:30 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119937 We are running Cisco Unity Connection version: 7.1.2.20000-140. If I call x6205 directly it goes to the voice mailbox as it should. However, x6204 a 05 Nov 2009 05:56:20 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119936 I am working with TAC on this issue but wondering as to how others have their Connection Port Groups set up for MWI. Every time I make a change and re 05 Nov 2009 05:44:55 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119935 Hi everyone, I can not backup CCX 7.0(1)SR4 although i had disabled the CSA from window services. Every time I tried to save the backup location, it 05 Nov 2009 01:09:35 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119924 Is there a procedure to remove a subcriber in cucm 7.x like here http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_1_3/ccmcfg/b09remsr.html 04 Nov 2009 22:44:58 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119918 Good Afternoon-- I'm getting slip seconds and errored seconds on my PRI controller. about 2-10 per 15 minutes with a total of about 200 per 24 hours 04 Nov 2009 13:37:32 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119887 Greetings, Unity 5 on Windows 2003. In the event viewer, I occasionally get and ugly sounding error: Event ID 550 Source CiscoUnity_Miu Cisco 04 Nov 2009 12:51:55 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119880 We upgraded to Call Manager 7.1.2.20000-2. I went to visit another office today that we just converted to VoIP and noticed that their sidecar displ 04 Nov 2009 12:35:37 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119876 I want to configure a user group on CUCM 7 that can restrict a user to manage/admin the phones in a specific device pool... I do not want this user t 04 Nov 2009 11:56:45 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119871 Does anyone know if Cisco has any recommendations they officially make on supporting analog telephony devices like fire alarm panels? We use ATAs fo 04 Nov 2009 11:51:54 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119868 Hi, I would like to know if any of you guys did an AD integration with Unity Connection? We are replacing our legacy voicemail system with CUC in 04 Nov 2009 11:44:15 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119866 Hi, We have Unity Connection 7 and have multiple geographically disparate sites. We have a requirement for a single call handler with various 04 Nov 2009 11:22:41 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119861 So, regular conferences work fine, but if I have two conferences and I want to conference them together, I get Key not active... It also manifests wh 04 Nov 2009 11:18:12 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119860 Greetings, Looks to me like I should be able to create a route pattern 9.411 or 9.5551212 and then under the Called Party Transformations, discard t 04 Nov 2009 09:57:51 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119852 Situation: UCCX version: 7.0(1)SR04_Build443 OS Version: 2003.1.5 I’ve build a script that creates and email, attaches a recorded .wav file, 04 Nov 2009 09:28:02 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119849 Afternoon all, I recently installed and configured CUCM 6.1(3) (for test purposes) within a VMWare session. An inter-cluster trunk has been co 04 Nov 2009 08:39:04 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119847 Hi all Just a quick question about AAR. We have a directory number e.g 4212154 assigned to a device profile and we have set the AAR mask to 01777750 04 Nov 2009 07:49:30 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119846 What is everybody using for their conference solution (if you have one)? Any thoughts on those? _______________________________________________ cisco- 04 Nov 2009 06:57:00 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119827 Hello group, I'm facing a problem with CAD agents login timeout. This is a new problem and the workaround is to disable the LDAP Authentication. I se 04 Nov 2009 05:06:31 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119818 I have trouble with Cisco Response Solutions 5.0 (aka Contact Center). I try to backup it from localhost and get error: "Unable to contact Call Mana 04 Nov 2009 04:31:02 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119817 Anyone see 6.01b error out on the upgrade process to new version? We have tried 6.1.2 update file and it errors out saying MD5 is not right. We've dow 03 Nov 2009 17:15:34 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119799 Has anyone started using SIP on the PSTN gateway? I want to use it instead of H.323 or MGCP and start migrating it to SIP on the gateway. Any experien 03 Nov 2009 15:09:28 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119791 I need some input on the process of upgrading my call manager from 6.1.2 to 6.1.4. I have already downloaded 6.1.4 to my laptop then to a flashdrive. 03 Nov 2009 14:09:53 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119787 So as I understand it my route group/list is what dictates my outbound call gateway distribution. But what determines how I best use those gateways s 03 Nov 2009 13:17:32 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119784 Can I run CUCiMOC or CUPS under VMWare ESX? ----------------------------------------- Disclaimer: This e-mail communication and any atta 03 Nov 2009 13:11:57 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119783 Hi All, I was wondering what other people do when using Extension Mobility with AD integration and E.164 numbering in AD. I am trying to work 03 Nov 2009 12:55:39 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119788 Beware of purchasing anything from calcellular.com - aka cs-power.com. I purchased a replacement battery for my MacBook Pro and have had nothing but 03 Nov 2009 10:53:17 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119767 New users are saying there MWI light is not working. I look up there profile in Unity and do a refresh on the MWI. After the refresh it tells me Reque 03 Nov 2009 09:56:06 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119755 Is there anyway to block the outgoing caller ID on a case by case basis? -- 03 Nov 2009 09:40:07 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119754 Is there a way to configure an intercluster trunk so that calls don't get dropped when a CM goes down or the Callmanager service is restarted? These 03 Nov 2009 09:37:58 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119752 I click proceed with download and it just sits there... Tried four times so far... J _______________________________________________ cisco-voip mai 03 Nov 2009 08:47:46 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119743 I downloaded the following from CCO. Do I remove _part1of2 and _part2of2 from the filenames and burn each as their own DVD? UCSInstall_UCOS_7.1.3. 03 Nov 2009 08:13:59 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119748 We recently migrated from Unity 4.05 to Connection 7.1.3. For some reason a lot of our users seem to be having an issue with this setting at default. 03 Nov 2009 07:43:44 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119724 I'm tryin to add a second Node to my CCM 7 environment. I have added the second server via the web interface setting the IP address and descriptio 03 Nov 2009 07:27:41 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119719 Hi Folks, I'm having trouble with this firmware load "TERM70.6-0-2-0S". In the current environment, it's DHCP based. I manually disabled DHCP and poi 03 Nov 2009 06:28:39 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119712 Hi, I am not into IPT much. I actually need to process some CDR queries to extract a certain report. Now the problem is that I noticed none of the C 03 Nov 2009 05:45:30 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119710 Hi Folks, We are currently deploying a CCM system and have a security remit of locking all Web Access to our 79xx phones. Can anyone advise on this n 03 Nov 2009 01:53:03 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119702 Dears, Good Morning , i asked about this bug "Field Notice: FN - 63255 - MCS-7825-I2 & IBM x306m, BIOS 1.42 & 1.43 error prevents a system from booti 03 Nov 2009 01:32:16 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119700 Group, I have a client that would like to remove the DND configuration feature from the ccmuser page on a 7.1.2bSU1 publisher. Yes I know they still 02 Nov 2009 18:55:39 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119688 Hi, I don't understand why CAR scheduler service gets stopped after 2 months or so. I tried automatic purge for records older than 120 days, but stil 02 Nov 2009 17:00:31 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119680 Hello all, Wondering if anybody has a 'cheat sheet' on how I can connect a Polycom Viewstation 384SP to our Cisco Call Manager Infrastructure. We 02 Nov 2009 16:51:15 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119678 We have just finished migrating all of our users from Unity to Microsoft Unified Messaging. Just wondering if any of you, who may be using it, know w 02 Nov 2009 14:43:29 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119674 I'm just wondering, I'd like to get some testing underway on the new v7.1, using a DMA export. How long of a grace period do I have with a DMA impor 02 Nov 2009 13:32:24 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119658 does anyone know if there is a router memory calculator like there is a DSP calculator? i'm trying to decide to stick with the default 1GB of memory 02 Nov 2009 12:15:52 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119653 Anyone seen any issues with 7942 and HHC running firmware *SCCP42.8-4-4S on 6.1.4a? TIA Scott* 02 Nov 2009 11:36:58 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119650 I have an IPCC cluster that is running IPCC 7.0.1 Sr1 and when the Supervisors press the Silent monitoring/or live record, the audio hear on the monit 02 Nov 2009 11:03:24 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119652 I had this happening and found out it was an MPLS circuit going down. Due to location of this particular site, our 12mbps MPLS circuit is supplied by 02 Nov 2009 10:35:02 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119649 Any experiences or opinions to share? 02 Nov 2009 09:35:24 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119640 Hello there, Greetings. I am having problem with my MGCP gateway, and I need little help and advice. My MGCP gateway is running as SRST, and it will 02 Nov 2009 08:47:08 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119638 Is there a way to block an incoming call from a known phone number to a known DN on Cisco phones? Hopefully easy to do. Thanks, Bill Web 02 Nov 2009 06:52:07 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119616 Dear all, Kindly , can you help me how I can change the background of 7912 and 7940 and 7960 when I use CUCM 6. Best Regards Rami A.A Khasawneh 02 Nov 2009 06:02:25 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119601 Hi every one Best Regards Rami A.A Khasawneh | SSSE,CCNA,CCDA,CCVP | Network Engineer Tel: +962 6 4603333 Ext: 355,364| Mob: +962 7 77603316 P. 02 Nov 2009 05:15:42 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119596 Morning, I have a test Call Manager (version 6.1(3) setup in VMWare which has an inter-cluster trunk configured to our live call manager environme 02 Nov 2009 03:09:42 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119592 Well good morning, i have not see it coming and now i am facing the bug! I run 5.1.3f on a 7825I2 server and got the problem after a reboot on friday 02 Nov 2009 01:28:11 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119588 Greeting: I have the following scenario. Two PBXes 11c and 61c. Both connected with Cisco Voice gateways as following: 11c----------------E1--------- 01 Nov 2009 01:39:43 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119575 I'm hoping I can get the groups help coming up with a design solution for a redundant SRST gateway solution to service a bank of VG224s. We have to se 31 Oct 2009 19:49:36 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119573 i am trying to upgrade UC systems to version 7. my company currently have CUCM version 6.1, Unity 5, and UCCX 5. my question is this: my consultant c 31 Oct 2009 06:05:18 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119553 Which model phones can do the new MWI Constant Message Count? http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/release/note s/713c 30 Oct 2009 18:17:56 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119550 Why does the screen for https://tools.cisco.com/SWIFT/Licensing/PrivateRegistrationServlet?FormI d=806 not have a next button, but always disappear 30 Oct 2009 17:12:56 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119548 What's the formula for determining the PVDM configuration one would need on a 2851 or 3845 voice router? One possible configuration is two (2) 23-cha 30 Oct 2009 14:50:46 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119534 Hi, We purchased a PRI (Cisco 2851 Gateway) from ATT, and while testing I find out the PSAP only sees the BTN when I make a test 911 call. I called 30 Oct 2009 13:49:07 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119532 Is there a TAC recommended restore plan that will verify backups can restore successfully? I have a client who is looking to validate and I am trying 30 Oct 2009 10:06:41 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119493 Hi all, Since upgrading to SR4 I have been having issues with my agents being stuck in reserved state for 120 seconds or longer. I need some help on 30 Oct 2009 09:04:58 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119492 I have 2 route patterns in the same partition, 9.010! or [3689]XXXXXXX Which one is closest match above? If I key in 90101314 I kee 30 Oct 2009 07:43:26 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119469 Hello, Is there a way to update the background image on IP Phones in bulk? I needed too change the background image on hundreds of phones and going o 30 Oct 2009 04:29:18 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119454 Morning All, I am in the process of testing Mobile Connect on Call Manager 6.1(3). So far I have managed to configure the publisher and phone with 30 Oct 2009 04:25:32 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119453 Hi Folks, Recently we upgraded our CUCM Cluster from 6.1.2 to 7.1.2 and every thing seems to be fine but we have a little problem now. We are conn 30 Oct 2009 00:16:32 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119450 Hi guys, I'm wondering if there's any way to manipulate original calling number in CUCM v6.1.2. for SIP Trunk. The setup is CUCMv6.1.2 --- IPIPGW -- 29 Oct 2009 20:39:33 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119448 https://supportforums.cisco.com/docs/DOC-6199 Appreciate your review and input. Regards, Wes _______________________________________________ cisco-v 29 Oct 2009 14:49:06 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119438 We are currently running version 5 of UCCX. We know the Cisco will EOL 5 and is recommending that folks go to 7. Has anyone gone from 5 to 7 or 5 to 29 Oct 2009 12:07:00 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119415 Hello all. I've got a e1 pri line in my office, terminating by cisco 2821. The compand type for E1 (Europe) is A-law, and show voice port 0/0/0:15 al 29 Oct 2009 11:20:03 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119409 Hello all, Curious if anyone has some of the new VG202's in production.. i'm seeing registration attempts from these devices that doesn't make sense 29 Oct 2009 09:06:20 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119395 Hello everyone, I am currently in the process of converting my campus to VoIP. As part of this conversion, we are placing faculty member on VG224s. 29 Oct 2009 08:54:01 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119400 Hello all. I've got a e1 pri line in my office, terminating by cisco 2821. The compand type for E1 (Europe) is A-law, and show voice port 0/0/0:15 al 29 Oct 2009 08:05:46 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119392 Can anyone enlighten me as to how Unity picks which MWI Dialout ports to use when multiple clusters are setup, each with their own dialout ports, in t 29 Oct 2009 07:48:42 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119385 I am preparing for a CUCMBE upgrade. I am going from UCM 6.1(2) and Connection 2.1. Reading the documentation I perform separate software upgrades for 29 Oct 2009 07:42:54 -0800 http://www.gossamer-threads.com/lists/cisco/voip/119384