Mailing List Archive by Gossamer Threads http://www.gossamer-threads.com/lists/cisco/voip/ en-us (c) Gossamer Threads Inc. All rights reserved. 22 Nov 2009 18:52:35 -0800 120 75 23 http://www.gossamer-threads.com/lists/cisco/voip/ http://www.gossamer-threads.com/images/lists/rss_logo.jpg It sounded like you were connecting an E1 to a TDM device and trunking IP upstream. If you're running like-for-like codecs and you're 100% IP then yo 22 Nov 2009 16:41:48 -0800 http://www.gossamer-threads.com/lists/cisco/voip/121085 thanks for your answers I think Nicks answer is the one am looking for since i am doing H323-H323 no need for DSPs. On Sun, Nov 22, 2009 at 11:22 PM, 22 Nov 2009 13:45:57 -0800 http://www.gossamer-threads.com/lists/cisco/voip/121079 More importantly - if you're not transcoding, you don't need the PVDM at all for an IPIPGW. Be sure that we're talking about a SIP-SIP, SIP-H323, or 22 Nov 2009 13:22:30 -0800 http://www.gossamer-threads.com/lists/cisco/voip/121077 Found what I needed. http://www.cisco.com/en/US/products/hw/routers/ps282/products_tech_note09186a008035b051.shtml AccessServer#show line Tty Lin 22 Nov 2009 12:40:12 -0800 http://www.gossamer-threads.com/lists/cisco/voip/121076 PVDM2-64 will handle 32 G729 medium complexity calls. PVDM2-32 will handle 16. PVDM2-16 will handle 8. You get the idea. On Nov 22, 2009, at 12:2 22 Nov 2009 12:37:35 -0800 http://www.gossamer-threads.com/lists/cisco/voip/121074 I have an ASYNC 16A/S network module in a 2811 and I'm not understanding how to associate the 'line' with the ip host command so I may use the 2811 to 22 Nov 2009 12:34:38 -0800 http://www.gossamer-threads.com/lists/cisco/voip/121075 Cisco DSP Calculator at: http://www.cisco.com/cgi-bin/Support/DSP/cisco_prodsel.pl .. is Your friend. A From: cisco-voip-bounces 22 Nov 2009 12:30:03 -0800 http://www.gossamer-threads.com/lists/cisco/voip/121078 One is enough. Greetings Marcin From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Ali El Moussaoui S 22 Nov 2009 12:16:07 -0800 http://www.gossamer-threads.com/lists/cisco/voip/121072 Hello Group, I am a silent watcher and this is my first post. I am planning a setup for an IPIPGW. The requirements state that the gteway must handle 22 Nov 2009 11:25:50 -0800 http://www.gossamer-threads.com/lists/cisco/voip/121071 Dears, We have a security concern regarding cups. When CUPS querying LDAP the integration account is sending the user name and password in plain te 22 Nov 2009 09:28:51 -0800 http://www.gossamer-threads.com/lists/cisco/voip/121068