yann.gauteron at net2000
Apr 11, 2005, 12:31 AM
Hi Adeel and Ben,
Re: Connect multiple upstreams of a single optical node with the same downstream
[In reply to]
Thanks for the information.
So it seems it is possible on Cisco uBR7246VXR. I'll try to make my lab
with such a machine, both our uBR7246 and the uBR7114 are running IOS
Unfortunatelly, I can't access the document linked by Adeel, as I don't
have a privileged account on the Cisco website !
Adeel Ahmed a écrit :
>You are probably looking for the Cable Load Balancing
>feature which can evenly distribute CMs across
>multiple upstreams statically (at registration time)
>or dynamically (based on interface load).
>Please take a look at the following link and see if it
>helps you out:
>Unfortunately this feature is only supported on the
>uBR7246VXR and uBR10012 CMTSs, not the uBR7100.
>By the way, if you want to do this statically via the
>DOCSIS configuration file you can use the "Upstream
>Channel ID" field in the configurator to assign CMs to
>a particular upstream port. But this does not scale