paul at paulstewart
Oct 31, 2008, 8:38 AM
Views: 1063
Permalink
|
Hi there..
I'm trying to get multiple RTR trackers running on a 7206VXR-NPE2G:
track 1 rtr 1 reachability
!
track 2 rtr 2 reachability
ip sla 1
icmp-echo xxx.xxx.xxx.116
timeout 3000
ip sla schedule 1 life forever start-time now
ip sla 2
icmp-echo xxx.xxx.xxx.198
timeout 3000
ip sla schedule 2 life forever start-time now
The first one works great:
Oct 22 07:04:30: %TRACKING-5-STATE: 1 rtr 1 reachability Down->Up
Oct 26 19:29:33: %TRACKING-5-STATE: 1 rtr 1 reachability Up->Down
Oct 26 19:30:34: %TRACKING-5-STATE: 1 rtr 1 reachability Down->Up
Oct 28 16:54:38: %TRACKING-5-STATE: 1 rtr 1 reachability Up->Down
Oct 28 16:55:34: %TRACKING-5-STATE: 1 rtr 1 reachability Down->Up
The second one doesn't work at all.... can't figure out if I'm missing
something obvious ;)
What I'm using this for is to setup static routes based on reachability ...
long story as to why..
ip route xxx.xxx.xxx.0 255.255.255.240 xxx.xxx.xxx.116 track 1
Any clues?
Thanks,
Paul
_______________________________________________
cisco-nsp mailing list cisco-nsp[at]puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
|
Multiple RTR trackers
