risnaini at speed
Sep 13, 2007, 9:40 PM
Post #4 of 4
(226 views)
Permalink
|
----- Original Message -----
From: "Velasquez Venegas Jaime Omar" <Jaime[at]ulima.edu.pe>
To: "Asbjorn Hojmark - Lists" <lists[at]hojmark.org>
Cc: <cisco-nsp[at]puck.nether.net>
Sent: Friday, September 14, 2007 4:23 AM
Subject: Re: [c-nsp] Access-Points - Dhcp Relay
:
: Thanks.However, the "ip helper-address" is available in every interface
: (dot11radio,fastethernet and BVI)
: Any explanation?
Where is your DHCP server located ?
Or the pool set for each vlan on your router ?
rgs.
a. rahman isnaini r.sutan
:
: Thank you
:
: -----Original Message-----
: From: Asbjorn Hojmark - Lists [mailto:lists[at]hojmark.org]
: Sent: Jueves, 13 de Septiembre de 2007 03:47 p.m.
: To: Velasquez Venegas Jaime Omar
: Cc: cisco-nsp[at]puck.nether.net
: Subject: RE: [c-nsp] Access-Points - Dhcp Relay
:
: > We have just deployed our wireless network with some Cisco access
: > points. We would like access point act as dhcp relay for each
: > configured ssid-vlan.
:
: The access point (if 'fat') is just a bridge, so there's no DHCP relay
: functionality available (or necessary). Use whatever router you have in
: each (V)LAN as a DHCP server.
:
: -A
:
:
: _______________________________________________
: cisco-nsp mailing list cisco-nsp[at]puck.nether.net
: https://puck.nether.net/mailman/listinfo/cisco-nsp
: archive at http://puck.nether.net/pipermail/cisco-nsp/
:
:
: --
: No virus found in this incoming message.
: Checked by AVG Free Edition.
: Version: 7.5.485 / Virus Database: 269.13.14/999 - Release Date: 9/10/2007
5:43 PM
:
:
_______________________________________________
cisco-nsp mailing list cisco-nsp[at]puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
|
