cisco at peakpeak
Aug 28, 2002, 9:47 AM
Post #1 of 1
(131 views)
Permalink
|
|
[nsp] Problem on 53xx with XB7 and portware 2.9.4.0
|
|
As far as I know this problem also occurs on XA5 with portware 2.9.2.0
Obviously I changed the IP's, numbers, etc to protect the innocent.
Here is the code I have:
#show flash
System flash directory:
File Length Name/status
1 10325548 c5300-ds-mz.122-2.XB7.bin
2 468529 mica-modem-pw.2.9.4.0.bin
[10794208 bytes used, 5983008 available, 16777216 total]
16384K bytes of processor board System flash (Read/Write)
Here is the problem. An async user dials in, gets RADIUS-authenticated,
and has an IP address:
Router#show caller ip | include stanley
As109 stanley 192.168.1.53 7195551111 7195551212 in
But, I can't ping them:
Router#ping 192.168.1.53
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.53, timeout is 2 seconds:
U.U.U
Success rate is 0 percent (0/5)
Not basing my entire existence on whether I can ping someone or not :) I
look at the routing table entry:
Router#show ip route 192.168.1.53
% Subnet not in table
Well that is strange. So I wonder to myself, "Self, are they even still
logged in?"
Router#show caller ip | include stanley
As109 stanley 192.168.1.53 7195551111 7195551212 in
So at this point I have a user logged in, they got an IP from the pool, the
IP isn't in the table (and it isn't assigned anywhere else in the network)
so I wonder at this point what else to look at to determine the cause of
this problem.
He logged off before I could do a show int async109, but I want to be ready
next time this occurs. Can someone offer me some tips on what else to look at?
Thanks,
Chris
|
