sapage at sapage
Jul 25, 2012, 10:05 PM
Post #1 of 1
(235 views)
Permalink
|
|
Nexus 5596 b22hp with HP G8 issues.
|
|
Just adding to my last questions about hp and FCOE Has anyone seen anything
like this?
Can only get maximum 2 fabric logins per fabric from FCOE devices using
Emulex 554 CNAs (have 4 servers/8 CNAs)
Results from starting each server in order, 30 secs apart:
Boot server 1 only – both CNAs login (see inside the CAN bios)
Boot server 2 next – only 1 CNA will login (again can see on BIOS)
Boot server 3 – sometimes 1 will login, though mostly none will
Boot server 4 – no CNAs log in.
Shutdown and boot each server in any order, the configurations above stay
the same.
If I reset the B22 fabric extended, and do a hard reset of each blade
server and do the following in order, leaving 30 seconds apart:
Boot server 4 only – both CNAs login (see inside the CAN bios)
Boot server 2 next – only 1 CNA will login (again can see on BIOS)
Boot server 1 – sometimes 1 will login, though mostly none will
Boot server 3 – no CNAs log in.
Repeat the above procedure in a different order and the first server to
start always gets 2 CNAs to login, the next gets 1 CAN to login and so
forth.
Emulex 554 bios is at v 4.1.402.20
Currently have a tac case open to look at this at it ring to be a licensing
issue on the 5596 for FCOE but from what I can see it looks like we are
licensed for it.
_______________________________________________
cisco-nsp mailing list cisco-nsp [at] puck
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
|
