nsp-list at pollok
Jun 19, 2012, 12:52 AM
Post #3 of 3
(304 views)
Permalink
|
|
Re: IOS IPv6 Forwarding over Virtual-Access%IPV6_FORWARDING-3-NULLIDB
[In reply to]
|
|
Moin Oli,
>> *Jun 18 2012 12:17:48 CEST: %IPV6_FORWARDING-3-NULLIDB: Uninitialized
>> interface pointer - ipv6_fib_forw -Process= "L2X Data Daemon", ipl= 0,
>> pid= 193 -Traceback= 0x8173D634z 0x81096DACz 0x8133B70Cz 0x8133BFF4z
>> 0x8133C050z 0x801F1254z 0x801F1734z 0x801F1960z 0x801F1A94z
> 0x804E6FC4z
>> 0x804CD854z.
>>
>> Ping/Connections using the Link-Local seem to work but this happens
>> when e.g. sending a ping via the Virtual-Access.
>>
>> This is on a 886VA (acting as PPTP Server) running 15.1(2)T1.
>
> can you please work with TAC on this? We need to decode the tracebacks
> and look into the specific environment..
> Can you switch IPv6 traffic across the interface, or do you just see the
> message and have no v6 connectivity? Looks like the specific switching
> path isn't properly set up for v6, so TAC and engineering need to look
> at it..
Ok will open a TAC case. Global unicast connectivity does not work.
Also when e.g. pinging the CPE from the other end and this 886VA tries
to send the reply. It also throws this message.
Link-local is working (Ping, Telnet/SSH to CPE etc).
Cheers
Sascha
_______________________________________________
cisco-nsp mailing list cisco-nsp [at] puck
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
|
