cstand141 at gmail
Jun 17, 2012, 5:42 AM
Post #1 of 1
(200 views)
Permalink
|
|
6500 L2 Switch Traffic locally between two SubInterfaces on different ports
|
|
translate the vlan numbers to another ?
> Message: 6
> Date: Sun, 17 Jun 2012 03:08:15 -0500
> From: Erik Sundberg <ESundberg [at] nitelusa>
> To: Jason Lixfeld <jason [at] lixfeld>
> Cc: "cisco-nsp [at] puck" <cisco-nsp [at] puck>
> Subject: Re: [c-nsp] 6500 L2 Switch Traffic locally between two
> SubInterfaces on different ports?
> Message-ID:
> <F42C4EF1807ACE49AE1036D08C5F1396023D78AD54 [at] NI-MAIL01>
> Content-Type: text/plain; charset="us-ascii"
>
> I was looking in to the connect command after posting. Unfortunately the only supported interfaces types are showing up on the switch is Dialer and MFR on the 6500
>
>
> So the reason that i am not setting this up as a vlan is the following.
>
> We have multiple GE circuits to different carriers that are setup as "L2 NNIs". The carriers deliver circuits (T1s to MetroE) to our customers put the traffic for each customer on a VLAN on the GE. Depending on the customers' needs they get Internet Access, L3VPN MPLS, or EoMPLS L2 P-P Service. With the multiple carriers going into this same chassis we have a lot of overlapping VLAN id's. (Config example at end of email)
>
> So the need for a L2 connection between two carriers are on the same switch has come up and that is why i need to create the Local L2 switching between the two subinterfaces.
>
> Here is what i am looking for in the XR Software but i am looking to be able to do the same thing on the Cat6500, but it doesn't support L2VPNv3
> l2vpn
> xconnect group examples
> p2p example1
> interface TenGigE0/7/0/6.5
> interface GigabitEthernet0/4/0/30
_______________________________________________
cisco-nsp mailing list cisco-nsp [at] puck
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
|
