dcp at dcptech
Feb 24, 2012, 11:06 AM
Post #2 of 2
(251 views)
Permalink
|
MDT didn't come around till later. Upgrade the code to a 124T release for
MDT support. Need MDT support for SSM support of the Data groups, otherwise
you don't need MDT. But, then you are stuck with ASM or the default group
only.
David
--
http://dcp.dcptech.com
-----Original Message-----
From: cisco-nsp-bounces [at] puck
[mailto:cisco-nsp-bounces [at] puck] On Behalf Of Henry Huaman
Sent: Thursday, February 23, 2012 12:48 AM
To: cisco-nsp [at] puck
Subject: [c-nsp] mVPN with 2811PE
Importance: High
Hi,
Currently we are testing mVPN with 2811 (ios 124-25b) like PE.
And we see these issues:
- The configuration don´t have “address-family ipv4 mdt” command.
- The 2811 don´t response to ping (group multicast) ( 2811 with
igmp join)
- We don´t see the “interface Tunnel” associate with the VRF
(2811#show ip vrf interface VRF)
Is valid this behavior? Or maybe we could to change this version?
Thx
Henry
_______________________________________________
cisco-nsp mailing list cisco-nsp [at] puck
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list cisco-nsp [at] puck
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
|
