Mailing List Archive by Gossamer Threads http://www.gossamer-threads.com/lists/cisco/nsp/ en-us (c) Gossamer Threads Inc. All rights reserved. 24 Nov 2009 00:34:36 -0800 120 75 23 http://www.gossamer-threads.com/lists/cisco/nsp/ http://www.gossamer-threads.com/images/lists/rss_logo.jpg Since googling yielded nothing, here goes one for the archives. If a Cisco 12000 PRP-1 displays 022A (and is otherwise dead) the cause of the proble 23 Nov 2009 23:49:08 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/121208 Hi, I have two 2821 routers with policy-based firewall configured on them. There's IPSec GRE tunnel configured between the routers. The problem is t 23 Nov 2009 17:57:04 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/121189 I am building out a new datacenter. The edge is going to consist of 2 routers. Each device has a 10G interface connected to a different provider with 23 Nov 2009 13:20:17 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/121164 Team, What Cisco IOS version is capable of running IPv6 NAT-PT and creating IPv6 ACLs on a 7204 VXR? So far I've tried both of the following but 23 Nov 2009 10:40:15 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/121139 Similar to Gert's question on on delayed eBGP startup, is there a good way to delay IGP default-route generation? Since our DFZ routers have a 0/0 na 23 Nov 2009 10:29:24 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/121142 Hi Jeremy, Yes, we have experienced some delays. This is something you will have to take up with your Cisco account team. Best regards, Charlie G 23 Nov 2009 09:13:48 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/121129 Before start to think how I could do that... Is there anyone here with a TCL script to check if an ACL is empty so it is detroying the PBR sequence? 23 Nov 2009 08:28:31 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/121126 Hey Group, Has anyone recently been seeing unusual/extended delivery dates being provided on Cisco ASR1000 series or Catalyst 4500 gear? We've had so 23 Nov 2009 07:39:00 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/121128 Hello all, I'm writing in to ask this. I know that you can run a sho cable modem (ip of modem) to look at a specific modem on a Cisco. What I'm look 23 Nov 2009 07:04:02 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/121115 Hi all, I am planning to implement Secondary VLANs feature on a Metro ETTH based on ME3400+76k. I have read various docs about the best I found is on 23 Nov 2009 06:47:40 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/121114 Hey all, Ran across this by accident on a 871 running 12.4(24)T2: DE-Atlanta(config)#ntp server ? A.B.C.D IP address of peer WORD 23 Nov 2009 06:23:35 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/121112 Hi, so I'm now following the design that everbody claims is "best" (loopbacks in OSPF, everything else in BGP), and I've found a few corner cases tha 22 Nov 2009 23:46:56 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/121092 Hi All, For those running tacacs+, are you using the version from www.shrubbery.net/tac_plus/ <http://www.shrubbery.net/tac_plus/> or the version f 22 Nov 2009 18:53:20 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/121086 Hi I'm looking for upgrade my 7606 filled with X6704-GE and X6748-SFP (all with CFC right now) My first phase will be swap SUP720-3BXL for RSP720-3CX 22 Nov 2009 16:34:32 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/121083 Hi, What is the general recommendation regarding enabling flow control on Ethernet interfaces. Is it a legacy issue when devices had smaller buffers, 22 Nov 2009 12:28:24 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/121073 Sorry to re-open. Good job to HP for generating noise. Anyone want to buy some procurve switches? On Mon, Nov 2, 2009 at 12:34 AM, christian koch <ck 22 Nov 2009 11:20:29 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/121069 Hi, I have Catalyst 3560 and 2960 switches connected by a two member Etherchannel trunk using built in copper GE interfaces. For some reason Ethernet 22 Nov 2009 04:46:34 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/121061 Hi, I have a Cisco 6509 with SUP720-3BXL. It has over a hundred bgp peers configured, two full tables, 4 ibgp, several peerings at an IXP. Seemingl 20 Nov 2009 20:22:11 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/121038 Hi, I want to configure QoS on a Cisco's 800 and 1800 series router and I couldn't make it work the way I want. I've configured three classes of serv 20 Nov 2009 07:26:49 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120993 Gang, I have a 3725 with some t1 interfaces. I want to be a good netizen and establish urpf on my customer facing interfaces to ensure they can't s 20 Nov 2009 06:12:37 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120990 I have a new-to-me Cisco 12008 which I am working on swapping in as a replacement for a 7206VXR which was moving way too much traffic.... GRP,, Engi 19 Nov 2009 19:52:05 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120973 Hello all, I am new to the list. I have been looking around in the archives, and i was surprised with the technical knowledge present in this list. I 19 Nov 2009 14:39:57 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120967 Hi Folks, We're looking for a new Edge routing platform for our Core DC locations. This platform will terminate our internet links and bigger private 19 Nov 2009 11:21:04 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120952 Also when possible, filter the debug by using 'debug condition xxxx'. []īs _______________________________________________ cisco-nsp mailing list c 19 Nov 2009 09:56:13 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120938 Is there any way I can get a route tagged in eigrp redistributed into bgp with the tag intact? _______________________________________________ cisco-n 19 Nov 2009 08:51:22 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120936 Hi all, We have executed this morning "debug ip nat" in a 7206VXR with ver bad results. The router was overloaded for a while and at the end we neede 19 Nov 2009 08:12:14 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120933 Group, This is happening to a Catalyst 4507R: %C4K_IOSMODPORTMAN-4-FANTRAYBAD: Fan tray has failed %C4K_CHASSIS-2-INSUFFICIENTFANSDETECTED: Too few 19 Nov 2009 05:49:23 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120912 Hi everyone, We currently have a bunch of RAD FOM-E1/T1 modems. They work in pairs converting E1 (entering via coax) to optical signaling carried via 19 Nov 2009 04:11:07 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120905 What are the limits for spanning tree on Cisco 4500? I'm interested both in MST and PVST+. Is it a set "STP instances" like normal switches, or virtu 19 Nov 2009 03:28:31 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120904 i have Cisco metroethernet 3750 i want to limit the traffic in outbound direction as i read the limit can be made in the inbound direction what else 19 Nov 2009 02:14:16 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120903 Anybody on the list have experience with Cisco's ACE20-SBC session border controller linecard? I have been learning as much as I can about it, and I'd 18 Nov 2009 15:51:33 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120871 Anyone, Labbing up L2TPv3 on a couple routers back to back, having some issues with just one way traffic. Topology looks like thi 18 Nov 2009 14:05:08 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120868 Hi all, Anybody out there running into CPU exhaustion issues on this box (or a non-fixed-configuration Sup6E, ...), linked to the "low priority" mana 18 Nov 2009 12:27:48 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120849 Greetings, I've been out of the market on the latest Cisco routers for a while and I'm looking for some info about a router to use in a small co-loca 18 Nov 2009 12:09:31 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120842 Hi all, I have a lab that uses a Foundry 4802 for routing / switching. This item is ready to end its lease and I need to replace it with somethi 18 Nov 2009 11:40:07 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120840 Here's my scenario as I understand it (i've inherited this w/ no option to ask the prior involved parties sadly). We are a VOIP service provider. We 18 Nov 2009 09:43:15 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120828 i work in a university which has three campuses. on each campuse, there is one cisco 6509 switch as a core switch. all other switches (L2) are in vtp 18 Nov 2009 05:03:12 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120793 Dear all, In trying to troubleshoot VPN traffic on a Cisco ASA 5520, is it possible to debug the actual traffic in the tunnel. Scenario: Site to site 18 Nov 2009 04:40:06 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120792 Hi folks - Need to learn BGP. Cisco-focused ok. Looking for the right book to buy. Willing to buy 2-3 to get the right one. I know the very fundame 18 Nov 2009 04:29:47 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120789 Dear all i have 5 giga ethernet interfaces connected via port channel to WiMAX ASN gateway the device is cisco CISCO7606-S with IOS c7600s72033-advip 18 Nov 2009 03:24:27 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120784 I'm researching IOS versions for upgrading our transit routers to support 32-bit ASNs, and it seems that I need to use basically the absolute latest 1 18 Nov 2009 02:46:52 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120785 Hello all, recently I got issue with L2L IPSec tunnel on one of our ASA firewalls. The problem is that when remote site initiates the connection, AS 18 Nov 2009 02:28:14 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120783 Hey All, Is there any work around to get SNMP over 1-to-1 NAT on Cisco? I found an old overview from CCIE Routing TCP/IP, Volume II 2002, does anyon 17 Nov 2009 23:24:58 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120770 Hey all, I am confused as to why a BGP feed I take and take with a community and redistribute are some 50k routes different. Details follow: Platfo 17 Nov 2009 20:05:03 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120762 Hi, Can anyone point me in right direction for a perl script that will snmpwalk the MIB for switch port status whether "up" or "down" including total 17 Nov 2009 12:46:42 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120737 Hi, Does anyone know if licensing is need on Cisco 7600 (and if so do you know the product number) for broadband activation on ES+ cards (not interes 17 Nov 2009 11:43:42 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120723 Hey all, I had been suffering from some input/output queue drops on the Catalyst side of a connection between a [Cat6500 (Sup 720-3BXL) WS-6724-SFP] 17 Nov 2009 10:49:12 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120720 Just a quick question or two. Does anybody have good/bad experience with a 7600-ES20-10G3CXL in a 7606 with 720-3bxl? I am looking to terminate a 13 17 Nov 2009 10:24:04 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120719 Hi everyone! I look for a good choice of XR to upgrade to from 3.5. In terms of features there are no mandatory ones that could drive us to do 3.8 ins 17 Nov 2009 09:25:12 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120717 I started deploying Catalyst 4948 switches as TOR devices about 3 months ago. The policing and packet-handling have been behaving quite nicely. Physi 17 Nov 2009 08:33:33 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120710 This may end up a TAC case after I gather more information this morning, but thought I'd run this by the list in case it rang any bells (or you had si 17 Nov 2009 07:09:21 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120699 I have been running the SXI(3) on a test router with 100M MM 6324, which it did not recognize in previous versions, and so far no complaints but then 17 Nov 2009 06:51:01 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120698 Hmm: http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtb87454 """ Symptom: This bug deals with a fe 17 Nov 2009 00:47:01 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120680 Hi All, Does anyone know what the middle number represents in a "debug mpls packet" ( eg: {7963 6 254} )? I can't find this information anywhere. 16 Nov 2009 23:03:34 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120673 Create a node on everything2.com like this one.... http://www.everything2.com/title/support.microsoft.com -----Original Message----- From: cisco 16 Nov 2009 16:49:08 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120660 Seems cisco is getting lazy.. SXI3 is out and this has to be one of the worst release notes ever: CSCta14457 - A Cisco device may report alig 16 Nov 2009 15:11:09 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120637 Hello, I have the following hardware/software: 6509, SUP32, 12.2(33)SXH4. Here's the story. I was doing CPU traffic profiling for CoPP. I've created 16 Nov 2009 13:43:59 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120626 Not sure what Adjust regions is. After a google search nothing turns up. here is my cpu output: sh proc cpu sorted | e 0.00 CPU utilization for five 16 Nov 2009 13:14:33 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120625 Hi, I have a 12810 /w 12.0(32)SY10 and I am unable to add gigabit ethernet interfaces from my SPA-10X1GE-V2 to a port channel. I guess I just assume 16 Nov 2009 10:36:10 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120603 Hello, Im trying to upgrade an old SUP2. I can boot 12.1.27 from bootflash: without problem. When I do reload from IOS with 12.2.18 and boot from dis 16 Nov 2009 10:20:09 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120601 Hi All, I have a 2801 running 12.4(22)T3 with WIC1-DSU-T1-V2 giving me some WIC related error logging messages: wait_ft1_wic_mailbox failed and %S 16 Nov 2009 08:45:51 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120588 Hi All, I'm connected to 2 upstreams, is there any performance issue if upload from 192.168.1.0/24 is via upstream 1 but download for this class is 16 Nov 2009 05:10:10 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120558 Which were the subscribers and unidirectional flows usage at the moment of the problem? I've never seen such errors. -----Mensagem original----- De: 16 Nov 2009 04:48:36 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120556 Hi, What is the output from 'show controllers errors fabric'? First of all I would try to reseat the LC6 and see if the CRC errors stop. -----Mensa 16 Nov 2009 04:41:09 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120554 Hello group, I have a 12k reporting this: %FABRIC-3-ERR_HANDLE: Reconfigure LC on fabric due to CRC error from slot 6 In one week, i have 4 of thes 16 Nov 2009 04:15:24 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120553 Hi I have a strange problem. I have a Serial interface with one /30 IP configure as a link network between PE and CE. interface Serial1/0 descripti 16 Nov 2009 03:31:28 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120546 Hi We are slowly moving toward IPv6 implementation in production, so I came to ACLs. I would want to have some protection for our servers, so I went 16 Nov 2009 02:56:17 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120545 Hi all. My SCE8000 logs a lot of error messages: > 2009-11-01 00:56:15 | WARN | CPU #000 | System had started hardware > congestion bypassed 2009-1 16 Nov 2009 02:18:07 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120544 Hi All, We migrated a link between two pops onto a Switched Ethernet circuit and since then we can't pass MPLS VPN traffic between those two pops fr 15 Nov 2009 20:31:07 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120542 hey all i have configured kron to backup my configuration files and all is working fine now i want to take ping values and store it in a file on the 15 Nov 2009 07:00:52 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120528 Is it supported in any IOS? Does anyone if it is going to be supported in the future? _______________________________________________ cisco-nsp maili 15 Nov 2009 06:12:24 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120527 IS there anyone in this mailing list involved with the IRIS project? _______________________________________________ cisco-nsp mailing list cisco-ns 15 Nov 2009 05:58:04 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120526 During a high network usage event, the cpu load increased to 90% sustained, while a 'show processes cpu' did not reveal any culprits. I suspected IP I 14 Nov 2009 16:58:08 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120518 So after chasing this thing since SRC, and having gone through all the various rebuilds until now, I'm not proud to say that the evil BFD + watchdog 14 Nov 2009 10:35:59 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120513 Is there any performance difference for a two port etherchannel created on a single WS-X6748 card vs. one port on two different WS-X6748 cards? We've 13 Nov 2009 13:53:43 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120494 Just got of the horn with a Cisco SE and he related that this switch is basically a 3560E with toned down features introduced for the "competitive mar 13 Nov 2009 09:31:48 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120478 Hi list happy friday, he BGP scanner issue has been beaten (literally) to death here, but I had a few general performance related questions regarding 13 Nov 2009 07:46:49 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120469 I was looking at updating software on a 3550 recently and noticed the very latest 12.2SE code claims to only run on the 3550-24-DC. Is this because 13 Nov 2009 06:31:23 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120467 Hello guys, Can someone please forward me a sample VPN server configuration for Cisco 1800 router. Basically I want my c1800 router as VPN server 13 Nov 2009 05:01:58 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120463 Hello, I need to realize an IPv6-island inside an IPv4 network. To connect my IPv6-island to the IPv4-world I need a network-device with the followi 13 Nov 2009 02:50:46 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120460 Hi, I have a legacy 4006 Chasis with a SUP3, recently started giving issues. I know it's EOL, and more than likely needs to be replaced, but any 13 Nov 2009 01:15:59 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120457 Fantastic, that's the solution confreg on SP was 0, re-configuring conf-reg solved the issue :-) Many, mans thanks !!!!! 7600#remote command switch 13 Nov 2009 00:31:30 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120453 My 7600 boots ignores the boot statement and goes into ROMMON. >From ROMMON I can boot with following command: rommon 2 >* boot bootdisk:c7600s72033 12 Nov 2009 22:56:42 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120450 Hi group, Can someone explain why router 7600 uses the same MAC address for all VLAN interfaces and ES20 ports? Catalyst 3560 has different MAC a 12 Nov 2009 19:30:32 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120444 Anyone know how glean traffic behaves on a Sup720 with CoPP configured? We have gradually locked down our CoPP config, to the point that our final cl 12 Nov 2009 18:32:46 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120443 Does anyone know offhand how to enable local wireless bridge (client to client communication) on the radio on a Cisco 877W? I swear I thought I saw it 12 Nov 2009 10:41:59 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120426 I'm trying to plan for a QoS implementation for an Internet Access provider. I just finished reading RFC 4594 and it recommends VoIP signalling traffi 12 Nov 2009 07:22:34 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120401 Guys, Has anyone used one of these WDM splitter cables from cisco (WDM-1300-1550-S)? https://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps65 12 Nov 2009 06:49:36 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120397 Hello, I am attempting to help a customer debug an interconnect issue on his L2TP configuration. Unfortunately, this particular customer is no 12 Nov 2009 06:48:27 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120400 I need to know your opinion about fiber to desk i.e. pros and cons.. Thanks in advance. _______________________________________________ cisco-nsp mai 12 Nov 2009 05:10:02 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120393 Hi, Has anyone any information about when the 7600 will support mc-lag? //Niklas _______________________________________________ cisco-nsp mailing li 12 Nov 2009 04:27:07 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120391 Hi, I am planing to use Cisco 12000 series Two port OC-192 line card. I would like to have some feedback on this line card. This line card supports 11 Nov 2009 17:18:07 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120376 HI guys, Just a quick question. Here's my context --------------------------------------------------- CPE1----------*QinQ + L2PT port* (7600)------V 11 Nov 2009 09:17:21 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120349 Hi Folks, A bit offtopic but wondering if anybody has had the chance of evaluating/Deploying AristaNetwork Switching products. they are currently off 10 Nov 2009 15:47:29 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120304 I am trying to configure something like this: A primary LSP with 5g bandwidth... and lower priority.. A secondary LSP with 500m bandwidth and higher 10 Nov 2009 13:57:49 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120301 On Tue, 2009-11-10 at 10:44 -0600, James Slepicka wrote: > Just keep in mind that traffic through the firewalls usually* needs to > be symmetric. Be 10 Nov 2009 13:26:10 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120285 Maybe: mpls static crossconnect in_label out_interface out_label -----Mensagem original----- De: cisco-nsp-bounces@puck.nether.net [mailto:cisco-nsp- 10 Nov 2009 13:00:22 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120281 Hi, Actually I meant the ability to forward fragmented packets in hardware. The router is not fragmenting the packets at all. -----Mensagem original- 10 Nov 2009 11:50:02 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120273 Hi list, I would like to know whether SUP720-3BXL supports IPv4 fragmented packets in hardware or not. If it can be supported in hardware, in whi 10 Nov 2009 11:31:32 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120271 Hi there, I am looking for a way to combine RSA tokens to authenticate to devices and use rancid to make backups of my device configuration. The RSA 10 Nov 2009 10:14:26 -0800 http://www.gossamer-threads.com/lists/cisco/nsp/120268