david.lin at msn
Sep 27, 2007, 1:05 PM
Post #3 of 3
(3200 views)
Permalink
|
Hi Darryl,
Thank you for your assistance.
My chassis information is as following, is it ok for this feature?
Thanks.
Cisco IOS Software, 5350 Software (C5350-IK9S-M), Version 12.4(3), RELEASE
SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Fri 22-Jul-05 06:07 by hqluong
ROM: System Bootstrap, Version 12.2(1r)1, RELEASE SOFTWARE (fc1)
BOOTLDR: 5350 Software (C5350-BOOT-M), Version 12.2(2)XB2, EARLY DEPLOYMENT
RELEASE SOFTWARE (fc1)
Gateway5350 uptime is 4 weeks, 2 days, 35 minutes
System returned to ROM by reload at 15:26:22 EST Tue Aug 28 2007
System image file is "flash:c5350-ik9s-mz.124-3.bin"
>From: "Darryl Sladden (dsladden)" <dsladden [at] cisco>
>To: "David Lin" <david.lin [at] msn>, <cisco-nas [at] puck>
>Subject: RE: [cisco-nas] VoIP leg to VoIP lge dial-peer
>Date: Thu, 27 Sep 2007 10:25:46 -0700
>
>David,
>
>Yes this is possible.
>This is called Cisco Unified Border Element (previously IP-IP Gateway
>functionality).
>
>This is supported on the AS5350XM and AS5400XM with IOS image
>12.4M and later.
>
>Older chassis do not support this.
>
>Regards,
>Darryl Sladden
>Product Manager
>Cisco Systems - Access Technology Group
>dsladden [at] cisco
>Phone: 408-525-8970
>Cell: 408-505-2510
>
>
>
>
>
> > -----Original Message-----
> > From: cisco-nas-bounces [at] puck
> > [mailto:cisco-nas-bounces [at] puck] On Behalf Of David Lin
> > Sent: Thursday, September 27, 2007 8:43 AM
> > To: cisco-nas [at] puck
> > Subject: [cisco-nas] VoIP leg to VoIP lge dial-peer
> >
> > Hi all,
> > I am working on one AS5350 to covert the codec and voice
> > protocol, now I am using 2 T1 interface to do it. The call
> > comes to the gateway and goes to the T1, then comes back to
> > the gateway from another T1 port. I change the codec on the
> > outgoing voip call leg.
> > Is it possible to send the VoIP call to AS5350 then route it
> > to VoIP directly? It means both incoming call leg and
> > outgoing call leg is VoIP in the dial-peer so that I don't
> > need to do the back to back/loop back connection and save the
> > T1/E1 interface.
> >
> > David
> >
> > _________________________________________________________________
> > A place for moms to take a break!
> > http://www.reallivemoms.com?ocid=TXT_TAGHM&loc=us
> >
> > _______________________________________________
> > cisco-nas mailing list
> > cisco-nas [at] puck
> > https://puck.nether.net/mailman/listinfo/cisco-nas
> >
_________________________________________________________________
Former Police Officer Paul Gillespie’s TAKE BACK THE INTERNET tips and
tricks, watch the video now http://safety.sympatico.msn.ca/
|
