dsladden at cisco
Nov 7, 2005, 12:34 PM
Post #2 of 2
(1538 views)
Permalink
|
Peder,
A T.38 incoming call to a T.37 outgoing call is NOT
possible.
You could put a back to back T1 in the second 3640
and have calls go out T1 and back into T1 on same
router.
Regards,
Darryl Sladden
Product Manager AS5000
Cisco Systems - ABU
dsladden [at] cisco
408-525-8970
> -----Original Message-----
> From: cisco-nas-bounces [at] puck
> [mailto:cisco-nas-bounces [at] puck] On Behalf Of
> info [at] beprojects
> Sent: Monday, November 07, 2005 12:06 PM
> To: cisco-nas [at] puck
> Subject: [cisco-nas] T.37
>
> Is anybody familiar with T.37 fax on a Cisco? I'm trying to
> configure it and can't quite figure out what to do. I have
> one 3640 which is the PRI gateway and I want it to forward
> the call via T.38 to a seconf 3640, which I want to T.37 the
> fax. The reason for two boxes is that I don't want to mess
> with my production gateway. Of course all of the sample
> configs show the box with the pri actually terminating the
> fax, so I am not even sure if what I want is possible, but it
> seems to me that it should be. I just need a reference
> config to follow. Thanks.
>
> Peder
>
> _______________________________________________
> cisco-nas mailing list
> cisco-nas [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-nas
>
_______________________________________________
cisco-nas mailing list
cisco-nas [at] puck
https://puck.nether.net/mailman/listinfo/cisco-nas
|
