ericknudson at gmail
Jul 10, 2005, 11:36 AM
Post #2 of 2
(1216 views)
Permalink
|
Laca,
I don't think it will - I remember dealing with this a few years ago.
Something related to TEIs - perhaps 1 device will work, but not two?
http://cisco.com/en/US/partner/tech/tk652/tk653/technologies_tech_note09186a0080111b16.shtml
The docs for the 2nd generation BRI VIC state:
"The ISDN BRI VICs are only supported for connectivity to another
switching system (for example: a PBX or to the PSTN). Connectivity to
ISDN BRI phones is not supported."
Eric
On 7/7/05, Nemeth Laszlo <csirek [at] externet> wrote:
> Hi All!
>
> I have a Cisco 1750 with VIC 2B-NT/TE card.
> I have found an example for indstruction on the Cisco web on how to
> configurate this card on to PBX or PSTN, but it did'n say how you to set
> this card so that it will work cobinated with a ISDN telephon set?
> I'd like to connect an ISDN telephone (Siemens Profiset 30isdn) direct
> on this card.
>
> My question is it works at all together telefones?
>
> Thanx!
>
> Laca
> _______________________________________________
> cisco-nas mailing list
> cisco-nas [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-nas
>
|
