christian.steger at upc
Oct 22, 2009, 3:50 AM
Post #1 of 1
(1327 views)
Permalink
|
|
WG: LNS - vpdn dialout question with cisco ACS
|
|
hi again,
still not resolved that problem.. any suggestions?
many thanks!
chris
* -----Ursprüngliche Nachricht-----
* Von: cisco-nas-bounces [at] puck [mailto:cisco-nas-
* bounces [at] puck] Im Auftrag von Steger, Christian
* Gesendet: Montag, 19. Oktober 2009 10:44
* An: cisco-nas [at] puck
* Betreff: [cisco-nas] LNS - vpdn dialout question with cisco ACS
*
*
* hello there,
*
* i am trying to setup an szenaria where my LNS should created
* dynamically an l2tp tunnel
* while requesting the tunnel parameters from the ACS for an specific
* group of users. (Service-Type Outbound!)
*
* the IOS will be used is "c7200p-advipservicesk9-mz.124-4.XD10.bin"
*
* as you can see below i have setup the required tunnel parameters:
* (received while doing an "debug aaa author")
*
* Oct 19 06:41:05.848 MET-DST: ppp1599 AAA/AUTHOR/LCP: Authorization
* succeeds trivially
* Oct 19 06:41:06.872 MET-DST: ppp1599 PPP/AAA: Check Attr: service-type
* Oct 19 06:41:06.872 MET-DST: ppp1599 PPP/AAA: Check Attr: tunnel-type
* Oct 19 06:41:06.872 MET-DST: ppp1599 PPP/AAA: Check Attr: tunnel-
* medium-type
* Oct 19 06:41:06.872 MET-DST: ppp1599 PPP/AAA: Check Attr: tunnel-
* server-endpoint
* Oct 19 06:41:06.872 MET-DST: ppp1599 PPP/AAA: Check Attr: tunnel-
* password
* Oct 19 06:41:06.872 MET-DST: ppp1599 PPP/AAA: Check Attr: vpdn-group
* Oct 19 06:41:06.872 MET-DST: ppp1599 PPP/AAA: Check Attr: addr
* Oct 19 06:41:06.876 MET-DST: AAA/BIND(001E59C9): Bind i/f Virtual-
* Access3.634
* Oct 19 06:41:06.876 MET-DST: Vi3.634 AAA/AUTHOR/LCP: Process Author
* Oct 19 06:41:06.876 MET-DST: Vi3.634 AAA/AUTHOR/LCP: Process Attr:
* service-type
* Oct 19 06:41:06.876 MET-DST: Vi3.634 AAA/AUTHOR/LCP: Unsupported
* Service-Type: 5. No supported types found.
*
* i actually did not find any reasons where the problem could be. - i
* guess the "unsupported service-type" means
* the "Outbound" call - what is the problem that he cannot setup an l2tp
* tunnel?
*
* here is the output from the "debug radius auth":
*
* Oct 19 06:46:58.504 MET-DST: RADIUS(001E5A06): Send Access-Request to
* xxx.xxx.xxx.42:1645 id 1645/19, len 149
* Oct 19 06:46:58.504 MET-DST: RADIUS: authenticator ED ED 36 23 9F AD
* 5C 0B - D2 1B FB 6D 7F 03 5E DD
* Oct 19 06:46:58.504 MET-DST: RADIUS: Framed-Protocol [7] 6 PPP
* [1]
* Oct 19 06:46:58.504 MET-DST: RADIUS: User-Name [1] 23
* "xxx [at] xxx"
* Oct 19 06:46:58.504 MET-DST: RADIUS: User-Password [2] 18 *
* Oct 19 06:46:58.504 MET-DST: RADIUS: NAS-Port [5] 6 76
* Oct 19 06:46:58.504 MET-DST: RADIUS: NAS-Port-Id [87] 16
* "Uniq-Sess-ID76"
* Oct 19 06:46:58.504 MET-DST: RADIUS: Calling-Station-Id [31] 14
* "43xxxxxxxxxxx"
* Oct 19 06:46:58.504 MET-DST: RADIUS: Called-Station-Id [30] 19
* "i_am_the_nas"
* Oct 19 06:46:58.504 MET-DST: RADIUS: Connect-Info [77] 9
* "8640000"
* Oct 19 06:46:58.504 MET-DST: RADIUS: NAS-Port-Type [61] 6
* Virtual [5]
* Oct 19 06:46:58.504 MET-DST: RADIUS: Service-Type [6] 6
* Framed [2]
* Oct 19 06:46:58.504 MET-DST: RADIUS: NAS-IP-Address [4] 6
* xxx.xxx.48.202
* Oct 19 06:46:58.512 MET-DST: RADIUS: Received from id 1646/173
* xxx.xxx.xxx.42:1646, Accounting-response, len 20
* Oct 19 06:46:58.516 MET-DST: RADIUS: Received from id 1645/19
* xxx.xxx.xxx.42:1645, Access-Accept, len 123
* Oct 19 06:46:58.516 MET-DST: RADIUS: authenticator 9F 8E 66 16 EE 4F
* E4 AD - BA B9 09 CF 67 4C 23 9D
* Oct 19 06:46:58.516 MET-DST: RADIUS: Service-Type [6] 6
* Outbound [5]
* Oct 19 06:46:58.516 MET-DST: RADIUS: Tunnel-Type [64] 6
* 01:L2TP [3]
* Oct 19 06:46:58.516 MET-DST: RADIUS: Tunnel-Medium-Type [65] 6
* 01:IPv4 [1]
* Oct 19 06:46:58.516 MET-DST: RADIUS: Tunnel-Server-Endpoi[67] 15
* 01:"xxx.xxx.48.140"
* Oct 19 06:46:58.516 MET-DST: RADIUS: Tunnel-Password [69] 21
* 01:*
* Oct 19 06:46:58.516 MET-DST: RADIUS: Tunnel-Assignment-Id[82] 12
* 01:"LAC_xxxx"
* Oct 19 06:46:58.516 MET-DST: RADIUS: Framed-IP-Address [8] 6
* xxx.xxx.100.5
* Oct 19 06:46:58.516 MET-DST: RADIUS: Class [25] 31
*
* thanks for any help. - of course an static setup would be work fine,
* but i´d like to prefer an dynamic setup.
*
* thanks for any answers/suggestions
*
* chris
This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify us immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person: to do so could be a breach of confidence. Thank you for your cooperation.
Information pursuant to paragraph 14 Austrian Companies Code: UPC Austria GmbH; Registered Office: Wolfganggasse 58-60, 1120 Vienna Company Register Number: FN 189858d at the Commercial Court of Vienna
_______________________________________________
cisco-nas mailing list
cisco-nas [at] puck
https://puck.nether.net/mailman/listinfo/cisco-nas
|
