alirez at hotmail
Sep 20, 2004, 6:55 AM
Post #1 of 1
(200 views)
Permalink
|
Dear All, We are running a Cisco 7206VXR box with IOS Version 12.2(4)BW. We have enable OAM to manage PVC. Following is the configuration: interface ATM6/0.17 point-to-point
ip address x.x.x.x 255.255.255.252
pvc test1 2/91
protocol ip x.x.x.x
oam-pvc manage
encapsulation aal5snap
! Problem we are facing with this configuration is the PVC takes hours to go down. "OAM Managed VC Status" shows "Down Retry". I did not find any bug reported for this IOS version. Kindly suggest. Regards
router>sh atm pvc test1
ATM6/0.17: VCD: 365, VPI: 2, VCI: 91, Connection Name: test1
UBR, PeakRate: 149760 (353208 cps)
AAL5-LLC/SNAP, etype:0x0, Flags: 0xC20, VCmode: 0x0
OAM frequency: 10 second(s), OAM retry frequency: 1 second(s)
OAM up retry count: 3, OAM down retry count: 5
OAM Loopback status: OAM Sent
OAM Managed VC Status: Down Retry
ILMI Managed VC status: Not Managed
VC is managed by OAM.
VC TxRingLimit: 40 particles
VC Rx Limit: 800 particles
InARP frequency: 15 minutes(s)
Transmit priority 6
InPkts: 0, OutPkts: 58, InBytes: 0, OutBytes: 6699
InCells: 0, OutCells: 184
InPRoc: 0, OutPRoc: 12
InFast: 0, OutFast: 46, InAS: 0, OutAS: 0
InPktDrops: 0, OutPktDrops: 0/0/0 (holdq/outputq/total)
InCellDrops: 0, OutCellDrops: 0
InByteDrops: 0, OutByteDrops: 0
CrcErrors: 0, SarTimeOuts: 0, OverSizedSDUs: 0, LengthViolation: 0, CPIErrors: 0
Out CLP=1 Pkts: 0, Cells: 0
OAM cells received: 0
F5 InEndloop: 0, F5 InSegloop: 0, F5 InAIS: 0, F5 InRDI: 0
F4 InEndloop: 0, F4 InSegloop: 0, F4 InAIS: 0, F4 InRDI: 0
OAM cells sent: 2652
F5 OutEndloop: 2652, F5 OutSegloop: 0, F5 OutRDI: 0
F4 OutEndloop: 0, F4 OutSegloop: 0, F4 OutRDI: 0
OAM cell drops: 0
Status: UP
MSN 8 helps http://g.msn.com/8HMAEN/2743??PS=47575"]ELIMINATE E-MAIL VIRUSES. Get 2 months FREE*.
|
