giesen at snickers
Jan 14, 2011, 3:01 PM
Post #4 of 4
(2229 views)
Permalink
|
|
Re: Specify PPPoE Virtual-Access Interface bandwidth on LNS via RADIUS/AAA
[In reply to]
|
|
Sorry, missed this part....
#show int vi3 configuration
Virtual-Access3 is an VPDN link (sub)interface
Derived configuration : 200 bytes
!
interface Virtual-Access3
mtu 1492
bandwidth 155520
bandwidth receive 800
ip vrf forwarding TEST
ip unnumbered Loopback64757
ppp max-bad-auth 5
ppp authentication pap
random-detect
end
On Fri, Jan 14, 2011 at 5:59 PM, Gary T. Giesen <giesen [at] snickers> wrote:
> Virtual Template is:
>
> interface Virtual-Template1
> mtu 1492
> ip vrf forwarding TEST
> ip unnumbered Loopback64757
> ppp max-bad-auth 5
> ppp authentication pap
>
> Per my original email:
>
> #show int vi4
> Virtual-Access4 is up, line protocol is up
> Hardware is Virtual Access interface
> Interface is unnumbered. Using address of Loopback64757 (172.23.254.254)
> MTU 1492 bytes, BW 155520 Kbit/sec, RxBW 800 Kbit/sec, DLY 100000 usec,
> reliability 255/255, txload 1/255, rxload 1/255
> Encapsulation PPP, LCP Open
> Open: IPCP
> PPPoVPDN vaccess, cloned from AAA, Virtual-Template1
>
>
> As you can see, the receive bandwidth is being set, but not the send.
> If it works on your 7200 then it's probably a bug rather than a
> "missing feature" so maybe I'll go ahead and open a TAC case...
>
> GG
> On Thu, Jan 13, 2011 at 7:18 PM, Jon Simola <jsimola [at] gmail> wrote:
>> On Wed, Jan 12, 2011 at 7:31 AM, Gary T. Giesen <giesen [at] snickers> wrote:
>>> Is there any way to specify the bandwidth on virtual-access interfaces
>>> (to be used for OSPF, QoS, etc) via RADIUS/AAA? I'm currently using
>>> "lcp:interface-config=bandwidth 4032\nbandwidth receive 800".
>>
>> What does "sh int vi4 conf" show? What does the Virtual-Template look like?
>>
>> Your radius thing works fine for me:
>> xxxxxxxx-A01#sh int vi4 | inc BW
>> MTU 1492 bytes, BW 4032 Kbit/sec, RxBW 800 Kbit/sec, DLY 100000 usec,
>> xxxxxxxx-A01#sh int vi4 conf | inc band
>> bandwidth 4032
>> bandwidth receive 800
>>
>>
>> --
>> Jon
>> _______________________________________________
>> cisco-bba mailing list
>> cisco-bba [at] puck
>> https://puck.nether.net/mailman/listinfo/cisco-bba
>>
>>
>
_______________________________________________
cisco-bba mailing list
cisco-bba [at] puck
https://puck.nether.net/mailman/listinfo/cisco-bba
|
