philippe.hamet at orange-ftgroup
Feb 18, 2010, 1:54 AM
Views: 3714
Permalink
|
|
IP Pool selection from Radius server
|
|
Hi all,
I am trying to work out how Cisco IP pool selection can be implemented in a PPPoe environment.
BRAS : Cisco 7206, IOS 12.2-31(SB8)
Let's say that I have 2 IP pools locally defined in the BRAS with different ranges of IP addresses:
ip local pool pool-area1 10.0.0.2 10.0.0.100
ip local pool pool-area2 20.0.0.2 20.0.0.100
I can configure the Radius server to send in the right attribute (or probably a VSA) the string "pool-area1" or "pool-area2" to the 7206 in order to perform the right selection but I don't know how to configure the 7206 to accept IP-Pool selection from Radius server.
Can somebody help or provide links ?
Thanks
Regards,
Philippe
*********************************
This message and any attachments (the "message") are confidential and intended solely for the addressees.
Any unauthorised use or dissemination is prohibited.
Messages are susceptible to alteration.
France Telecom Group shall not be liable for the message if altered, changed or falsified.
If you are not the intended addressee of this message, please cancel it immediately and inform the sender.
********************************
_______________________________________________
cisco-bba mailing list
cisco-bba [at] puck
https://puck.nether.net/mailman/listinfo/cisco-bba
|
IP Pool selection from Radius server
