raghujindia at gmail
Nov 13, 2009, 1:04 AM
Post #3 of 3
(2561 views)
Permalink
|
Yeah Paul,
The ip location goes sequentially. First range 10 should exhaust and then it
goes to range 20 and so on...
On Wed, Nov 11, 2009 at 5:37 PM, Ilir Nako <inako [at] abcom> wrote:
> Hi Paul
>
> You can use this config :
> peer default ip address pool pooltest1 pooltest2 pooltest3
>
> ip local pool pooltest1 10.0.0.10 10.0.0.50
> ip local pool pooltest2 20.0.0.10 20.0.0.50
> ip local pool pooltest3 30.0.0.10 30.0.0.50
>
>
> show ip local pool : to see the allocation of Ip
>
> Regards
>
> Ilir
>
>
> Paul Cole wrote:
>
>> -->
>>
>>
>> Hi all,
>>
>> I am trying to work out how Cisco NAS allocate IPs to customers in a PPPoe
>> environment.
>>
>> Lets say that I have a pool named pooltest with different ranges of IP
>> addresses:
>>
>> peer default ip address pool pooltest
>>
>> ip local pool pooltest 10.0.0.10 10.0.0.50
>> ip local pool pooltest 20.0.0.10 20.0.0.50
>> ip local pool pooltest 30.0.0.10 30.0.0.50
>>
>> I am trying to work out how the NAS will operate here...randomly or using
>> the addresses in the range 10 and when addresses are all used there jump to
>> the range of 20..and then 30...?
>>
>> I need help understanding that.
>>
>> Would be great if someone can come up with some links or docs.
>>
>> Thanks
>>
>>
>> Regards,
>>
>>
>> _________________________________________________________________________________
>>
>> Paul
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> cisco-bba mailing list
>> cisco-bba [at] puck
>> https://puck.nether.net/mailman/listinfo/cisco-bba
>>
> _______________________________________________
> cisco-bba mailing list
> cisco-bba [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-bba
>
--
Thanks
Raghu
SAVE TREES..GO GREEN
|
