stefan at konink
Jul 1, 2009, 8:07 PM
Post #1 of 1
(128 views)
Permalink
|
|
Re: Cherokee and SSL Acceleration [KICK]
|
|
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
pub crawler wrote:
> Very interested in seeing what you come up with. What processor is in
> the EPIA board you have there? There are differences between the C3
> and C7 models Padlock wise, however the C7 and the NANO Padlock seems
> identical. Speeds will vary on Padlock also - seen many inconsistent
> numbers on seemingly same CPU. Lots of variables - RAM, bus, other
> activity on board, etc.
With two extra lines in Cherokee and on an 800MHz board (Epia-SP) I am
able to increase SSL trafic from 3,56M/s to 5,74 MB/s.
I have a 1.2GHz board here aswell, and everything is now inside a very
nice NFS root, so I can swap and test it easily.
On a 100Mbit nic 5.74 MB/s is not that bad; 9,14M/s is the average
https speed. Via Rhine II might not be the best offloaded NIC too, so
maybe with an e1000 or a nice 3com low profile this can be even
increased more.
Stefan
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.12 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iEYEAREKAAYFAkpMJIAACgkQYH1+F2Rqwn2WUACgjGwc11zadHN/MB//bu63x6bs
ME4An3Kej5qR9rv3UyIRwhdzVMB4/QtA
=Rw6N
-----END PGP SIGNATURE-----
_______________________________________________
Cherokee mailing list
Cherokee[at]lists.octality.com
http://lists.octality.com/listinfo/cherokee
|
