kakimoto at tpg
Jun 6, 2009, 2:04 AM
Views: 517
Permalink
|
|
Notes on installing lighttpd and FastCGI for Catalyst
|
|
hi guys,
I'm facing some problems with
http://dev.catalyst.perl.org/wiki/deployment/lighttpd_fastcgi.
I followed the instructions and still can't get to anyone of my sites
listed below.
- www.myapp.com/ (production)
- www.myapp.com:59000/ (production)
- www.stage.myapp.com:59000/ (staging)
1) I still have the default "/etc/lighttpd/lighttpd.conf" existing. Is
that going to cause confusion?
2) Since the tute instructed us to make the
/etc/lighttpd/conf-available/20_stage.conf and
/etc/lighttpd/conf-available/20_prod.conf, should I start lighttpd with:
- lighttpd -f /etc/lighttpd/conf-available/20_stage.conf
- lighttpd -f /etc/lighttpd/conf-available/20_prod.conf
If that's the case, I reckon I should put in more config into the two
files mentioned (such as with document root and so forth)
I;m not very good with admin/setup of services, so guys, I would
appreaciate some input:)
thank you
K. akimoto
_______________________________________________
List: Catalyst[at]lists.scsys.co.uk
Listinfo: http://lists.scsys.co.uk/cgi-bin/mailman/listinfo/catalyst
Searchable archive: http://www.mail-archive.com/catalyst[at]lists.scsys.co.uk/
Dev site: http://dev.catalyst.perl.org/
_______________________________________________
List: Catalyst[at]lists.scsys.co.uk
Listinfo: http://lists.scsys.co.uk/cgi-bin/mailman/listinfo/catalyst
Searchable archive: http://www.mail-archive.com/catalyst[at]lists.scsys.co.uk/
Dev site: http://dev.catalyst.perl.org/
|
Notes on installing lighttpd and FastCGI for Catalyst
