dayan at lateko
Sep 29, 2004, 9:22 AM
Post #1 of 1
(2116 views)
Permalink
|
Greetings,
Thank you, for a quick reply. I've configured both machines absolutely
same way now, but nothing changed. Or, may be, I just don't get sometning...
If I run Spread on a single machine it shows
Conf_init: using file: /usr/local/spread/etc/spread.conf
Successfully configured Segment 0 [192.168.0.255:4803] with 3 procs:
test.ltk: 192.168.0.2
test2.ltk: 192.168.0.1
test3.ltk: 192.168.0.11
Finished configuration file.
Conf_init: My name: test2.ltk, id: 192.168.0.1, port: 4803
Membership id is ( -1062731775, 1096474645)
--------------------
Configuration at test2.ltk is:
Num Segments 1
1 192.168.0.255 4803
test2.ltk 192.168.0.1
====================
When I start Spread on the other machine
I
Conf_init: using file: /usr/local/spread/etc/spread.conf
Successfully configured Segment 0 [192.168.0.255:4803] with 3 procs:
test.ltk: 192.168.0.2
test2.ltk: 192.168.0.1
test3.ltk: 192.168.0.11
Finished configuration file.
Conf_init: My name: test2.ltk, id: 192.168.0.1, port: 4803
Membership id is ( -1062731774, 1096471178)
--------------------
Configuration at test2.ltk is:
Num Segments 1
2 192.168.0.255 4803
test.ltk 192.168.0.2
test2.ltk 192.168.0.1
====================
++++++++++++++++++++++
Num of groups: 0
II
Conf_init: using file: /usr/local/spread/etc/spread.conf
Successfully configured Segment 0 [192.168.0.255:4803] with 3 procs:
test.ltk: 192.168.0.2
test2.ltk: 192.168.0.1
test3.ltk: 192.168.0.11
Finished configuration file.
Conf_init: My name: test.ltk, id: 192.168.0.2, port: 4803
Membership id is ( -1062731774, 1096471178)
--------------------
Configuration at test.ltk is:
Num Segments 1
2 192.168.0.255 4803
test.ltk 192.168.0.2
test2.ltk 192.168.0.1
====================
++++++++++++++++++++++
Num of groups: 0
As far, as I understood the manual, even a single machine should create a
group, but I can't see any groups in my system. Than, I start Wackamole, it
should use group wack1, but unless I start the Spread on the other machine,
Spread monitor shows no activity, after I start spread on the second
machine, monitors on both machines show that 1 group is present with the
only one machine in it (the first one). And they show no changes , when I
run Wackamole on the second one.
Conf_init: using file: /usr/local/spread/etc/spread.conf
Successfully configured Segment 0 [192.168.0.255:4803] with 3 procs:
test.ltk: 192.168.0.2
test2.ltk: 192.168.0.1
test3.ltk: 192.168.0.11
Finished configuration file.
Conf_init: My name: test2.ltk, id: 192.168.0.1, port: 4803
Membership id is ( -1062731775, 1096473863)
--------------------
Configuration at test2.ltk is:
Num Segments 1
2 192.168.0.255 4803
test2.ltk 192.168.0.1
test.ltk 192.168.0.2
====================
++++++++++++++++++++++
Num of groups: 1
[1] group wack1 with 1 members:
[1] #wack2218#test.ltk
----------------------
As I found, sometimes Wackamoles take same IPs, for example
(a segment of 192.168.12.200-204 given).
first machine:
eth1:1 Link encap:Ethernet HWaddr 00:02:B3:E8:91:B6
inet addr:192.186.12.203 Bcast:192.186.12.203
Mask:255.255.255.255
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:12 Base address:0x4000
eth1:2 Link encap:Ethernet HWaddr 00:02:B3:E8:91:B6
inet addr:192.168.12.201 Bcast:192.168.12.201
Mask:255.255.255.255
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:12 Base address:0x4000
eth1:3 Link encap:Ethernet HWaddr 00:02:B3:E8:91:B6
inet addr:192.168.12.202 Bcast:192.168.12.202
Mask:255.255.255.255
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:12 Base address:0x4000
Second machine
eth0 Link encap:Ethernet HWaddr 00:02:B3:E9:F0:F5
inet addr:10.99.15.149 Bcast:10.99.15.255 Mask:255.255.240.0
inet6 addr: fe80::202:b3ff:fee9:f0f5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:15521 errors:0 dropped:0 overruns:0 frame:0
TX packets:538 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1560262 (1.4 Mb) TX bytes:220830 (215.6 Kb)
eth1 Link encap:Ethernet HWaddr 00:02:B3:E9:F0:F4
inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::202:b3ff:fee9:f0f4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:224 errors:0 dropped:0 overruns:0 frame:0
TX packets:141 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:25796 (25.1 Kb) TX bytes:15650 (15.2 Kb)
Base address:0xbc00 Memory:fc5e0000-fc600000
eth1:3 Link encap:Ethernet HWaddr 00:02:B3:E9:F0:F4
inet addr:192.168.12.203 Bcast:192.168.12.203
Mask:255.255.255.255
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Base address:0xbc00 Memory:fc5e0000-fc600000
eth1:4 Link encap:Ethernet HWaddr 00:02:B3:E9:F0:F4
inet addr:192.168.12.204 Bcast:192.168.12.204
Mask:255.255.255.255
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Base address:0xbc00 Memory:fc5e0000-fc600000
(And local loopbacks for both , ofcourse)
Help needed badly.
_______________________________________________
wackamole-users mailing list
wackamole-users [at] lists
http://lists.backhand.org/mailman/listinfo/wackamole-users
|
