jesus at omniti
Nov 4, 2003, 1:32 PM
Post #2 of 3
(835 views)
Permalink
|
On Thu, 2003-10-30 at 10:29, Jake Cole wrote:
> Hi List,
>
> I am just getting started with wackamole, and i have a little question
> ... maybe someone can point me in the right direction.
>
> I am looking to setup wackamole at an host provider, but my fear is that
> the servers that will be used, will not be in the same
> IP ranges, or in the same netmasks ... i do not know if i am explaining
> my concern correctly ..
>
> .. the question is : is it a problem that members of a wackamole group
> are in different IP ranges (subnets), and that the virtual IPs are
> also in different ranges (subnets)?
If you can do it by hand with ifconfig, you should be able to get
wackamole to do it automatically. If youhave a large flat (no VLAN)
network, I don't see why you'd have a problem.
On the other hand, if the network is segmented, but each machine has a
physical interface on each segment, then it will work fine as well.
This is very similar to the configuration of wackamole on routers.
--
// Theo Schlossnagle
// Principal Engineer -- http://www.omniti.com/~jesus/
// Postal Engine -- http://www.postalengine.com/
// Ecelerity: fastest MTA on earth
|
