leo at cuckoo
Nov 28, 2001, 4:57 AM
Post #1 of 3
(1137 views)
Permalink
|
|
modproble: Can't locate module eth0:1
|
|
Hi,
I wonder if anyone could help.
I'm setting up wackamole across two servers sharing 3 VIP
addresses and will be using RR DNS for the web site.
Error in /var/log/daemon.log is:
Nov 28 11:55:12 web-fe-01 modprobe: modprobe: Can't locate module eth0:1
Nov 28 11:55:12 web-fe-01 Wackamole[4048]: ioctl error setting IP address
Nov 28 11:55:12 web-fe-01 Wackamole[4048]: Aquire address 172.16.0.225
Nov 28 11:55:12 web-fe-01 modprobe: modprobe: Can't locate module eth0:1
Nov 28 11:55:12 web-fe-01 Wackamole[4048]: ioctl error setting IP address
Nov 28 11:55:12 web-fe-01 Wackamole[4048]: Aquire address 172.16.0.226
Nov 28 11:55:12 web-fe-01 modprobe: modprobe: Can't locate module eth0:1
Nov 28 11:55:12 web-fe-01 Wackamole[4048]: ioctl error setting IP address
Nov 28 11:55:12 web-fe-01 Wackamole[4048]: Aquire address 172.16.0.227
Hardware: Compaq DL360
OS: Debian potato stable (compact, so has Compaq drivers)
> uname -a
Linux web-fe-01 2.2.19-compact #1 Sat Jun 9 13:19:16 EST 2001 i686 unknown
Spread seems fine, I used this config on a couple of RedHat machines
and it worked ok. So I'm guessing it's debian, but as a recent convert
I'm not sure how to solve this.
Any help is much appreciated.
Thanks
Leo
> more /usr/local/etc/wackamole.conf
#
#The vip field gives a preferred address or an alias of a prefered address.
#These addresses must be members of the range given by of, below.
vip 172.16.0.225
#
#The of field gives a range of virtual addresses which are to be managed by
#wackamole.
of 172.16.0.225-227
#
#The router field gived the ip address of the router
#router router_ip
router 172.16.0.254
#
#This field is the broadcast address for the virtual addresses to be managed.
bcast 172.16.0.255
#
#This field is the network mask for the virtual addresses to be managed.
netmask 255.255.0.0
#
#This field is the interface on which wackamole ups and downs virtual addresses.
interface eth0
#
#This field is the maximum number of IP addresses that will move from one
#wackamole to another during a round of balancing.
balance rate 1
#
#This field gives the time (in seconds) between rounds of balancing.
balance timer seconds 5
#
#This is the time between the first wackamole's initialization and the
#maturity process. During this interval, IPs are not managed.
maturity timeout seconds 5
#
#If this is set to 0, balancing takes place as normal. Otherwise,
#there is only one round of balancing per membership event, and all
#IPs are balanced at once.
Complete Balance 1
|
